1、Cutting tool data representation and exchange Part 305: Creation and exchange of 3D models Modular tooling systems with adjustable cartridges for boring PD ISO/TS 13399-305:2017 BSI Standards Publication WB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06National foreword This Published Documen
2、t is the UK implementation of ISO/TS 13399- 305:2017. The UK participation in its preparation was entrusted to Technical Committee MTE/18, Tools tips and inserts for cutting applications. A list of organizations represented on this committee can be obtained on request to its secretary. This publicat
3、ion does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017. Published by BSI Standards Limited 2017 ISBN 978 0 580 92986 1 ICS 25.100.01; 35.240.50 Compliance with a British Standard cannot con
4、fer immunity from legal obligations. This Published Document was published under the authority of the Standards Policy and Strategy Committee on 31 January 2017. Amendments/corrigenda issued since publication Date Text affected PUBLISHED DOCUMENT PD ISO/TS 13399-305:2017 ISO 2017 Cutting tool data r
5、epresentation and exchange Part 305: Creation and exchange of 3D models Modular tooling systems with adjustable cartridges for boring Reprsentation et change des donnes relatives aux outils coupants Partie 305: Cration et change des modles 3D Systmes doutils modulables avec cartouches rglables pour
6、alsage TECHNICAL SPECIFICATION ISO/TS 13399-305 Reference number ISO/TS 13399-305:2017(E) First edition2017-01 PD ISO/TS 13399-305:2017 ISO/TS 13399-305:2017(E)ii ISO 2017 All rights reserved COPYRIGHT PROTECTED DOCUMENT ISO 2017, Published in Switzerland All rights reserved. Unless otherwise specif
7、ied, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISO
8、s member body in the country of the requester. ISO copyright office Ch. de Blandonnet 8 CP 401 CH-1214 Vernier, Geneva, Switzerland Tel. +41 22 749 01 11 Fax +41 22 749 09 47 copyrightiso.org www.iso.org PD ISO/TS 13399-305:2017 ISO/TS 13399-305:2017(E)Foreword vi Introduction vii 1 Scope . 1 2 Norm
9、ative references 1 3 T erms and definitions . 2 4 Starting elements, coordinate systems, planes 2 4.1 General . 2 4.2 Reference system 2 4.3 Mounting coordinate system 3 4.4 Coordinate system at the cutting part 4 4.5 Planes 5 4.6 Adjustment coordinate system on workpiece side 6 4.6.1 General 6 4.6.
10、2 Designation of the coordinate system workpiece side . 7 4.6.3 Arrangement of coordinate system workpiece side 8 4.7 Design of the pocket seat and cutting reference point (CRP) of the insert . 9 5 Design of the model 13 5.1 General 13 5.2 Necessary parameters for the connection interface feature 13
11、 5.3 Necessary properties for insert and pocket seat 14 5.3.1 General.14 5.3.2 Properties for equilateral, equiangular and equilateral, non- equiangular inserts .14 5.3.3 Properties for non-equilateral, equiangular and non-equilateral, non- equiangular inserts .15 5.3.4 Properties for round inserts
12、.15 5.3.5 Design of the pocket seat feature16 6 Basic shapes for extension bridges, adjustment and assembly parts 16 6.1 Monoblock extension bridges with adaptor .16 6.1.1 General.16 6.1.2 Necessary properties 16 6.1.3 Basic geometry .17 6.2 Bridge tool adapter 19 6.2.1 General.19 6.2.2 Necessary pr
13、operties 19 6.2.3 Basic geometry .19 6.3 Bridge tool20 6.3.1 General.20 6.3.2 Necessary properties 21 6.3.3 Basic geometry .21 6.4 Slide for adjustable units .22 6.4.1 General.22 6.4.2 Necessary properties 22 6.4.3 Basic geometry of slides for adjustable units 22 6.5 Slide element .23 6.5.1 General.
14、23 6.5.2 Necessary properties 24 6.5.3 Basic geometry of slide elements .24 6.6 Balance weight .25 6.6.1 General.25 6.6.2 Necessary properties 26 6.6.3 Basic geometry of balance weights .26 ISO 2017 All rights reserved iii Contents Page PD ISO/TS 13399-305:2017 ISO/TS 13399-305:2017(E)7 Basic shapes
15、 for cartridges and insert holders .27 7.1 Adjustable unit .27 7.1.1 General.27 7.1.2 Necessary properties 28 7.1.3 Basic geometry of adjustable units .28 7.2 Boring head for adjustable units 29 7.2.1 General.29 7.2.2 Necessary properties 30 7.2.3 Basic geometry of boring heads for adjustable units
16、30 8 Basic shapes of rotating boring systems .31 8.1 General 31 8.2 Assembled single-point bridge tool .31 8.2.1 General.31 8.2.2 Necessary properties 32 8.2.3 Assembled model of single-point bridge tool 33 8.3 Assembled single-point bridge tool for reverse internal operations 35 8.3.1 General.35 8.
17、3.2 Necessary properties 36 8.3.3 Assembled model of single-point bridge tool for reverse operations 36 8.4 Assembled multi-point bridge tool.37 8.4.1 General.37 8.4.2 Necessary properties 38 8.4.3 Assembled model of multi-point bridge tool .39 8.5 Assembled single-point bridge tool for external ope
18、rations40 8.5.1 General.40 8.5.2 Necessary properties 40 8.5.3 Assembled model of single-point bridge tool for external operations 41 8.6 Assembled multi-point bridge tool for external operations .42 8.6.1 General.42 8.6.2 Necessary properties 43 8.6.3 Assembled model of a multi-point bridge tool fo
19、r external operations 43 8.7 Single-point bridge tool for axial grooving 44 8.7.1 General.44 8.7.2 Necessary properties 45 8.7.3 Assembled model of single-point bridge tool for axial grooving 46 8.8 Assembled multi-point bridge tool for axial grooving .47 8.8.1 General.47 8.8.2 Necessary properties
20、47 8.8.3 Assembled model of multi-point bridge tool for axial grooving 47 8.9 Boring head .48 8.9.1 General.48 8.9.2 Necessary properties 49 8.9.3 Assembled model of boring head .49 8.10 Fine boring head with boring bar 50 8.10.1 General.50 8.10.2 Necessary properties 50 8.10.3 Assembled model of fi
21、ne boring head with boring bar .51 8.11 Boring head with adjustable unit .52 8.11.1 General.52 8.11.2 Necessary properties 52 8.11.3 Assembled model of boring head with adjustable unit .53 9 Design of details .54 9.1 Basis for modelling .54 9.2 Fixing threads for inserts 54 9.3 Contact/clamping surf
22、aces Orientation 54 9.4 Chamfers and roundings .54 10 Attributes of surfaces Visualization of model features 55 iv ISO 2017 All rights reserved PD ISO/TS 13399-305:2017 ISO/TS 13399-305:2017(E)11 Data exchange model 55 Annex A (informative) Information about nominal dimensions 67 Annex B (informativ
23、e) STP structure 68 Bibliography .73 ISO 2017 All rights reserved v PD ISO/TS 13399-305:2017 ISO/TS 13399-305:2017(E) Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Stan
24、dards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also t
25、ake part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In
26、particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives). Attention is drawn to the possibility that some of the elements
27、 of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (s
28、ee www.iso.org/patents). Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement. For an explanation on the meaning of ISO specific terms and expressions related to conformit y assessment, as well as information about ISOs adheren
29、ce to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html. The committee responsible for this document is ISO/TC 29, Small tools. A list of all parts in the ISO 13399 series can be found on the ISO website.vi ISO
30、 2017 All rights reserved PD ISO/TS 13399-305:2017 ISO/TS 13399-305:2017(E) Introduction This document defines the concept, the terms and the definitions of how to design simplified 3D models of modular tooling systems with adjustable cartridges for boring that can be used for NC-programming, simula
31、tion of the manufacturing processes and the determination of collision within machining processes. It is not intended to standardize the design of the cutting tool itself. A cutting tool is used in a machine to remove material from a workpiece by a shearing action at the cutting edges of the tool. C
32、utting tool data that can be described by ISO 13399 include, but are not limited to, everything between the workpiece and the machine tool. Information about inserts, solid tools, assembled tools, adaptors, components and their relationships can be represented by this document. The increasing demand
33、 providing the end user with 3D models for the purposes defined above is the basis for the development of the ISO 13399 series. The objective of ISO 13399 series is to provide the means to represent the information that describes cutting tools in a computer sensible form that is independent from any
34、 particular computer system. The representation will facilitate the processing and exchange of cutting tool data within and between different software systems and computer platforms and support the application of this data in manufacturing planning, cutting operations and the supply of tools. The na
35、ture of this description makes it suitable not only for neutral file exchange, but also as a basis for implementing and sharing product databases and for archiving. The methods that are used for these representations are those developed by ISO/TC 184/SC 4 for the representation of product data by us
36、ing standardized information models and reference dictionaries. Definitions and identifications of dictionary entries are defined by means of standard data that consist of instances of the EXPRESS entity data types defined in the common dictionary schema, resulting from a joint effort between ISO/TC
37、 184/SC 4 and IEC/TC 3/SC 3D, and in its extensions defined in ISO 13584-24 and ISO 13584-25. ISO 2017 All rights reserved vii PD ISO/TS 13399-305:2017 Cutting tool data representation and exchange Part 305: Creation and exchange of 3D models Modular tooling systems with adjustable cartridges for bo
38、ring 1 Scope This document specifies a concept for the design of tool items, for all kinds of modular tooling systems with adjustable cartridges for boring, together with the usage of the related properties and domains of values. This document specifies a common way of designing simplified models th
39、at contain the following: definitions and identifications of the design features of modular tooling systems with adjustable cartridges for boring, with an association to the used properties; definitions and identifications of the internal structure of the 3D model that represents the features and th
40、e properties of modular tooling systems with adjustable cartridges for boring. The following are outside the scope of this document: a) applications where these standard data may be stored or referenced; b) concept of 3D models for cutting tools; c) concept of 3D models for cutting items; d) concept
41、 of 3D models for other tool items not being described in the scope of this document; e) concept of 3D models for adaptive items; f) concept of 3D models for assembly items and auxiliary items. 2 Normative references The following documents are referred to in the text in such a way that some or all
42、of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO/TS 13399-50, Cutting tool data representation and exchange Part 50: Referenc
43、e dictionary for reference systems and common concepts ISO/TS 13399-80, Cutting tool data representation and exchange Part 80: Creation and exchange of 3D models Overview and principles ISO/TS 13399-201, Cutting tool data representation and exchange Part 201: Creation and exchange of 3D models Regul
44、ar inserts ISO/TS 13399-202, Cutting tool data representation and exchange Part 202: Creation and exchange of 3D models Irregular inserts TECHNICAL SPECIFICATION ISO/TS 13399-305:2017(E) ISO 2017 All rights reserved 1 PD ISO/TS 13399-305:2017 ISO/TS 13399-305:2017(E) 3 T erms a nd definiti ons No te
45、rms and definitions are listed in this document. ISO and IEC maintain terminological databases for use in standardization at the following addresses: IEC Electropedia: available at http:/ /www.electropedia.org/ ISO Online browsing platform: available at http:/ /www.iso.org/obp 4 Starting elements, c
46、oordinate systems, planes 4.1 General The modelling of the 3D models shall be done by means of nominal dimensions. Some examples of nominal dimensions are given in Annex A. WARNING There is no guarantee that the 3D model, created according to the methods described in this document, is a true represe
47、ntation of the physical tool supplied by the tool manufacturer. If the models are used for simulation purposes, e.g. CAM simulation, it shall be taken into consideration that the real product dimensions can differ from those nominal dimensions. NOTE 1 Some of the definitions have been taken from ISO
48、/TS 13399-50. NOTE 2 ISO 10303-242 (STEP 3D) allow to write sub-assemblies as separate STEP 3D files. 4.2 Reference system The reference system shall consist of the following standard elements as shown in Figure 1: standard coordinate system: right-handed rectangular Cartesian system in three-dimens
49、ional space, called “primary coordinate system” (PCS); three orthogonal planes: planes in the coordinate system that contain the axis of the system, named “XY-plane” (XYP), “XZ-plane” (XZP) and “YZ-plane” (YZP); three orthogonal axis: axes built as intersections of the three orthogonal plane lines respectively, named “X-axis” (XA), “Y-axis” (YA) and “Z-axis” (ZA).2 ISO 2017 All rights reserved PD ISO/TS 13399-305:2017 ISO/TS 13399-305:2017(E) Figure 1 Primary coordinate system 4.3 Mounting
