BS PD ISO TS 11999-2-2015 PPE for firefighters Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and or flame while figh.pdf

上传人:王申宇 文档编号:399313 上传时间:2018-10-20 格式:PDF 页数:18 大小:1,022KB
下载 相关 举报
BS PD ISO TS 11999-2-2015 PPE for firefighters Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and or flame while figh.pdf_第1页
第1页 / 共18页
BS PD ISO TS 11999-2-2015 PPE for firefighters Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and or flame while figh.pdf_第2页
第2页 / 共18页
BS PD ISO TS 11999-2-2015 PPE for firefighters Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and or flame while figh.pdf_第3页
第3页 / 共18页
BS PD ISO TS 11999-2-2015 PPE for firefighters Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and or flame while figh.pdf_第4页
第4页 / 共18页
BS PD ISO TS 11999-2-2015 PPE for firefighters Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and or flame while figh.pdf_第5页
第5页 / 共18页
亲,该文档总共18页,到这儿已超出免费预览范围,如果喜欢就下载吧!
资源描述

1、BSI Standards Publication PD ISO/TS 11999-2:2015 PPE for firefighters Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures Part 2: CompatibilityPD ISO/TS 11999-2:2015 PUBLISHED DOCUMENT

2、 National foreword This Published Document is the UK implementation of ISO/TS 11999-2:2015. The UK participation in its preparation was entrusted to Technical Committee PH/14, Firefighters personal protective equipment. A list of organizations represented on this committee can be obtained on request

3、 to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2015. Published by BSI Standards Limited 2015 ISBN 978 0 580 85362 3 ICS 13.340.10 Compliance with a Britis

4、h Standard cannot confer immunity from legal obligations. This Published Document was published under the authority of the Standards Policy and Strategy Committee on 30 June 2015. Amendments issued since publication Date Text affectedPD ISO/TS 11999-2:2015 ISO 2015 PPE for firefighters Test methods

5、and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures Part 2: Compatibility quipement de protection personnelle pour pompiers Mthodes dessai et exigences pour les quipements de protection personnelle

6、 utiliss par les pompiers qui sont risque dune exposition des niveaux levs de chaleur et/ou de flamme quand la lutte contre les incendies survient dans les structures Partie 2: Compatibilit TECHNICAL SPECIFICATION ISO/TS 11999-2 Reference number ISO/TS 11999-2:2015(E) First edition 2015-06-01PD ISO/

7、TS 11999-2:2015ISO/TS 11999-2:2015(E)ii ISO 2015 All rights reserved COPYRIGHT PROTECTED DOCUMENT ISO 2015, Published in Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechani

8、cal, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Ch. de Blandonnet 8 CP 401 CH-1214 Vernier, Geneva, Swi

9、tzerland Tel. +41 22 749 01 11 Fax +41 22 749 09 47 copyrightiso.org www.iso.orgPD ISO/TS 11999-2:2015ISO/TS 11999-2:2015(E)Foreword iv Introduction v 1 Scope . 1 2 Normative References . 1 3 Terms and definitions . 1 4 Compatibility 2 4.1 General . 2 4.2 Minimum requirements of compatibility . 2 4.

10、3 Fit and function tests demonstrating compatibility . 2 4.3.1 Test subjects. 2 4.3.2 Compatibility for helmet/fire hood/jacket/RPD interface . 3 4.3.3 Compatibility for glove/jacket interface . 3 4.3.4 Compatibility for the jacket/trousers interface 3 4.3.5 Compatibility for the footwear/trousers i

11、nterface 4 4.3.6 Performance tests . 4 5 Marking 4 6 Manufacturers instructions . 5 Annex A (informative) Practical performance test Practical performance for compatibility of firefighters PPE ensemble or combinations 6 ISO 2015 All rights reserved iii Contents PagePD ISO/TS 11999-2:2015ISO/TS 11999

12、-2:2015(E) Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject fo

13、r which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on

14、all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees ar

15、e circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. In other circumstances, particularly when there is an urgent market requirement for such documents, a technical committee may decide to publi

16、sh other types of normative document: an ISO Publicly Available Specification (ISO/PAS) represents an agreement between technical experts in an ISO working group and is accepted for publication if it is approved by more than 50 % of the members of the parent committee casting a vote; an ISO Technica

17、l Specification (ISO/TS) represents an agreement between the members of a technical committee and is accepted for publication if it is approved by 2/3 of the members of the committee casting a vote. An ISO/PAS or ISO/TS is reviewed after three years in order to decide whether it will be confirmed fo

18、r a further three years, revised to become an International Standard, or withdrawn. If the ISO/PAS or ISO/TS is confirmed, it is reviewed again after a further three years, at which time it must either be transformed into an International Standard or be withdrawn. ISO/TS 11999-2 was prepared by Tech

19、nical Committee ISO/TC 94, Personal safety Protective clothing and equipment, Subcommittee SC 14, Fire-fighters personal equipment. ISO 11999 consists of the following parts, under the general title PPE for firefighters Test methods and requirements for PPE used by firefighters who are at risk of ex

20、posure to high levels of heat and/or flame while fighting fires occurring in structures: Part 1: General Part 2: Compatibility Part 3: Clothing Part 4: Gloves The following parts are under preparation: Part 5: Helmets Part 6: Footwear Part 7: Face and eye protection Part 8: Hearing Part 9: Firehoods

21、 Part 10: Respiratory protectioniv ISO 2015 All rights reservedPD ISO/TS 11999-2:2015ISO/TS 11999-2:2015(E) Introduction This International Standard provides minimum design and performance requirements for personal protective equipment (PPE) worn by firefighters to reduce injury and/or the loss of l

22、ife. Amongst other hazards faced by firefighters is exposure to high thermal loads and to flames. This International Standard details the design and performance requirements for the various items of PPE covered in all parts and for the compatibility of items of PPE when worn together. This Internati

23、onal Standard specifies design and performance requirements for the compatibility of ISO 11999-3, ISO 11999-4, ISO 11999-5, ISO 11999-6, ISO 11999-7, ISO 11999-8, ISO 11999-9, and ISO 11999-10 when all items covered in this International Standard are worn together, thereby creating an ensemble stand

24、ard. All items have to meet the general requirements for marking and manufacturers instructions (ISO 11999-1), as well as the specific marking and manufacturers instructions of the respective parts of ISO 11999. Under best practice for health and safety procedures, prior to choosing any PPE, a risk

25、assessment of the workplace is carried out. Where hazards are identified and cannot be removed from a workplace, the items of PPE chosen to protect the personnel need to be fit for their intended use while allowing the personnel to carry out the work required of them. In environments where firefight

26、ers may be required to work, not only must the PPE protect the firefighters while enabling them to achieve their objectives at an incident, but it must also safeguard them and allow a safe escape. The PPE chosen must also allow firefighters to carry out their duties without undue stress being caused

27、 by the PPE. Some PPE, particularly PPE to protect against mortal danger, can have failure levels far above the limit of exposures of human beings. On sites where such PPE is being used, it is important to ensure that proper and suitable safety procedures are in place which can identify when personn

28、el should be withdrawn from dangerous or potentially dangerous situations and which can ensure that the relevant medical support is available for firefighters. Since the decision on which PPE ensemble to use following risk assessment will dictate the parameters for protection of the persons who have

29、 to wear it, it is critical that decision-makers have knowledge of the risks against which the PPE is supposed to protect and its limitations. It is recommended that those who make the decision on the choice of PPE for particular workplaces should be competent in their knowledge and understanding of

30、 both the workplace hazards and the PPE from which to choose, prior to making these decisions, to ensure that informed decisions are taken. Further detail on carrying out risk assessment to ascertain the type of PPE required to protect personnel working in specific areas is included in ISO 11999-1:2

31、015, Annex A. Hazards in the workplaces of firefighters are varied but can be common from workplace to workplace; therefore, some uses of PPE for firefighters can be multipurpose. Because this International Standard has been developed on a risk assessment approach, a number of different types, level

32、s, or classes are given for certain performance requirements of various parts of a PPE ensemble. Based on their risk assessment, users of this International Standard can make a choice of which levels or classes are required for the particular workplace where their personnel are expected to work. Thi

33、s can include fires in domestic and commercial buildings, fires in industry, including aviation, petrochemical, chemical, pharmaceutical, land-based marine incidents, rescue, etc. This International Standard includes separate parts for each item of a firefighters ensemble. As PPE to protect each par

34、t of the body can be complex, this International Standard draws from the expertise of other Technical Committees in ISO which specialize in such protection. The results of the user risk assessment for certain workplaces can require the use of PPE with higher and/or different levels or classes of per

35、formance than those in this International Standard. PPE covered in this part of ISO 11999 will not protect from all possible exposures. Nothing in this International Standard is intended to restrict any jurisdiction, purchaser, or manufacturer from exceeding the minimum performance requirements spec

36、ified in this International Standard. ISO 2015 All rights reserved vPD ISO/TS 11999-2:2015ISO/TS 11999-2:2015(E) Another objective in the Business Plan of ISO/TC 94/SC 14 is to provide guidance on the selection, use, care, and maintenance for firefighters PPE. Such activities are critical to the lif

37、espan and continuing protective ability of any PPE and policies covering these aspects should be implemented as soon as the PPE is introduced into use. ISO/TC 94/SC 14 has developed a Technical Report on this subject, ISO/TR 21808. Firefighters should be trained in the selection, use, care, and main

38、tenance of their PPE. Firefighters should also be trained in the performance and limitation of their PPE.vi ISO 2015 All rights reservedPD ISO/TS 11999-2:2015PPE for firefighters Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flam

39、e while fighting fires occurring in structures Part 2: Compatibility 1 Scope This Technical Specification describes compatibility for ensembles of firefighters personal protective equipment (PPE) to be used by firefighters, who are at risk of exposure to high levels of heat and/or flame while fighti

40、ng fires occurring in structures. This Technical Specification includes methods for compatibility testing in laboratories and procedures for compatibility testing including the identification of any limitations to be performed by wearers. NOTE Where the presence of more than one risk to health and s

41、afety makes it necessary to wear or use simultaneously more than one item of personal protective equipment, such equipment is compatible and continues to be effective against the risk or risks in question. 2 Normative References The following documents, in whole or in part, are normatively reference

42、d in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 6330, Textiles Domestic washing and drying procedures for textile testing

43、ISO 11999-1, PPE for firefighters Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures Part 1: General ISO 17491-5, Protective clothing Test methods for clothing providing protection ag

44、ainst chemicals Part 5: Determination of resistance to penetration by a spray of liquid (manikin spray test) 3 Terms and definitions For the purposes of this document, the terms and definitions given in ISO 11999-1 and the following apply. 3.1 compatibility ability of a part of an ensemble of PPE to

45、 be used in conjunction with other parts of PPE 3.2 human interface interaction between PPE and the wearer 3.3 PPE interface interaction between different PPEs adjacent to other components TECHNICAL SPECIFICATION ISO/TS 11999-2:2015(E) ISO 2015 All rights reserved 1PD ISO/TS 11999-2:2015ISO/TS 11999

46、-2:2015(E) 3.4 performance test test procedure with PPE ensembles in laboratories under specified conditions 3.5 practical performance test test procedure with wearers of PPE ensembles moving under specified conditions 3.6 trim retro-reflective and fluorescent material attached to the outer shell fo

47、r visibility enhancement. Retroreflective materials enhance night time visibility, and fluorescent materials improve daytime visibility 4 Compatibility 4.1 General Compatibility becomes an issue when different types of PPE of an ensemble or combinations are worn at the same time. This is because eac

48、h type of PPE may interfere with another type of PPE. This may lead to a reduction of protection provided by the PPE and/or other restrictions, which may cause a limitation of the tactical mission. The main hazards of structural firefighting are impacts of heat and f lame. Furthermore the penetratio

49、n of water may cause severe injuries during structural firefighting. For items of PPE to be marked as compatible according to ISO 11999-1, they shall also meet the relevant performance requirements specified in this technical specification. Practical performance testing should be carried out in accordance with Annex A. NOTE Additional information on compatibility can be found in ISO/TR 21808. 4.2 Minimum requirements of compatibility Compatible items of PPE shall meet the relevant requir

展开阅读全文
相关资源
  • BS ISO IEC 29150-2011 Information technology Security techniques Signcryption《信息技术 安全技术 签密》.pdfBS ISO IEC 29150-2011 Information technology Security techniques Signcryption《信息技术 安全技术 签密》.pdf
  • BS ISO IEC 15408-1-2009 Information technology - Security techniques - Evaluation criteria for IT Security - Introduction and general model《信息技术 安全技术 IT安全评价准则 一.pdfBS ISO IEC 15408-1-2009 Information technology - Security techniques - Evaluation criteria for IT Security - Introduction and general model《信息技术 安全技术 IT安全评价准则 一.pdf
  • BS ISO 7295-1988+A1-2014 Tyre valves for aircraft Interchangeability dimensions《飞机轮胎汽门嘴 互换性尺寸》.pdfBS ISO 7295-1988+A1-2014 Tyre valves for aircraft Interchangeability dimensions《飞机轮胎汽门嘴 互换性尺寸》.pdf
  • BS ISO 15118-1-2013 Road vehicles Vehicle to grid communication interface General information and use-case definition《道路车辆 车辆到电力通讯接口 通用信息和使用案例定义》.pdfBS ISO 15118-1-2013 Road vehicles Vehicle to grid communication interface General information and use-case definition《道路车辆 车辆到电力通讯接口 通用信息和使用案例定义》.pdf
  • BS ISO 13765-2-2004 Refractory mortars - Determination of consistency using the reciprocating flow table method《耐熔灰浆 使用往复流动表法测定一致性》.pdfBS ISO 13765-2-2004 Refractory mortars - Determination of consistency using the reciprocating flow table method《耐熔灰浆 使用往复流动表法测定一致性》.pdf
  • BS ISO 10998-2008+A1-2014 Agricultural tractors Requirements for steering《农业拖拉机 操纵要求》.pdfBS ISO 10998-2008+A1-2014 Agricultural tractors Requirements for steering《农业拖拉机 操纵要求》.pdf
  • BS Z 9-1998 Space data and information transfer systems - Advanced orbiting systems - Networks and data links - Architectural specification《空间数据和信息传输系统 高级轨道系统 网络和数据链接 结构规范》.pdfBS Z 9-1998 Space data and information transfer systems - Advanced orbiting systems - Networks and data links - Architectural specification《空间数据和信息传输系统 高级轨道系统 网络和数据链接 结构规范》.pdf
  • BS Z 7-1998 Space data and information transfer systems - ASCII encoded English《空间数据和信息传输系统 ASCII 编码英语》.pdfBS Z 7-1998 Space data and information transfer systems - ASCII encoded English《空间数据和信息传输系统 ASCII 编码英语》.pdf
  • BS Z 5-1997 Space data and information transfer systems - Standard formatted data units - Control authority procedures《航天数据和信息发送系统 标准格式数据单元 控制授权程序》.pdfBS Z 5-1997 Space data and information transfer systems - Standard formatted data units - Control authority procedures《航天数据和信息发送系统 标准格式数据单元 控制授权程序》.pdf
  • BS Z 4-1997 Space data and information transfer systems - Standard formatted data units - Structure and construction rules《航天数据和信息传输系统 标准格式数据单元 结构和构造规则》.pdfBS Z 4-1997 Space data and information transfer systems - Standard formatted data units - Structure and construction rules《航天数据和信息传输系统 标准格式数据单元 结构和构造规则》.pdf
  • 猜你喜欢
    相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > BS

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1