1、PD ISO/TS 21219-24:2017 Intelligent transport systems Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) Part 24: Light encryption (TPEG2-LTE) BSI Standards Publication WB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06PD ISO/TS 21219-24:2017 PUBLIS
2、HED DOCUMENT National foreword This Published Document is the UK implementation of ISO/TS 21219-24:2017. The UK participation in its preparation was entrusted to Technical Committee EPL/278, Intelligent transport systems. A list of organizations represented on this committee can be obtained on reque
3、st to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017. Published by BSI Standards Limited 2017 ISBN 978 0 580 93251 9 ICS 03.220.01; 35.240.60 Compliance
4、with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 28 February 2017. Amendments/corrigenda issued since publication Date T e x t a f f e c t e dPD ISO/TS 21219-24:2017 ISO 20
5、17 Intelligent transport systems Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) Part 24: Light encryption (TPEG2-L TE) Systmes intelligents de transport Informations sur le trafic et le tourisme via le groupe expert du protocole de transport, gnration
6、 2 (TPEG2) Partie 24: Cryptage lger (TPEG2-L TE) TECHNICAL SPECIFICATION ISO/TS 21219-24 Reference number ISO/TS 21219-24:2017(E) First edition 2017-02PD ISO/TS 21219-24:2017ISO/TS 21219-24:2017(E)ii ISO 2017 All rights reserved COPYRIGHT PROTECTED DOCUMENT ISO 2017, Published in Switzerland All rig
7、hts reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from e
8、ither ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Ch. de Blandonnet 8 CP 401 CH-1214 Vernier, Geneva, Switzerland Tel. +41 22 749 01 11 Fax +41 22 749 09 47 copyrightiso.org www.iso.orgPD ISO/TS 21219-24:2017ISO/TS 21219-24:2017(E)Foreword v Int
9、roduction vi 1 Scope . 1 2 Normative references 1 3 Terms and definitions . 1 4 Abbreviated terms 3 5 Light Encryption specific constraints . 4 5.1 Version number signalling 4 5.2 Extendibility 4 5.3 Endianness . 4 5.4 Supported business models . 4 5.5 Performance requirements 5 5.5.1 Repetition rat
10、e of light encryption parameters 5 5.5.2 Update rate of light encryption parameters . 5 5.6 License agreement and security requirements 5 5.6.1 General 5 5.6.2 Security requirements on service providers . 6 5.6.3 Security requirements on client manufacturers 6 6 Light encryption method of encryption
11、 and operation . 6 6.1 Principles of operation for light encryption 6 6.2 Overview of the light encryption method 7 6.2.1 General 7 6.2.2 TISA secret KeyTable and TISAparameterInConfidence . 8 6.3 Encryption and decryption of service data frame payload data 9 6.3.1 General 9 6.3.2 Block cipher mode
12、of operation . 9 6.3.3 Initialisation Vector 11 6.4 Encryption and decryption of transmitted Control Words 11 6.5 Service Key composition .12 6.5.1 General.12 6.5.2 Light Encryption modes 1 and 2 common parameters for Service Key composition 13 6.5.3 Light Encryption Mode 1 specific parameters for S
13、ervice Key composition 14 6.5.4 Light Encryption Mode 2 specific parameters for Service Key composition 14 6.5.5 Example Service Key Composition 14 7 Light Encryption structure and embedding in TPEG service data frames 16 7.1 General 16 7.2 Light encryption embedding in TPEG service data frames .16
14、7.3 Light Encryption components 16 7.4 LTE tables . .18 7.5 Initialisation Vector composition .18 7.6 Service Key composition .18 8 L TE components .19 8.1 LteInformation .19 8.2 LteParameters 19 8.3 LteMode1Parameters .20 8.4 LteMode2Parameters .20 8.5 Mode1EMMessage 21 8.6 Mode2EMMessage 21 9 L TE
15、 Datatypes .22 9.1 ControlWord .22 ISO 2017 All rights reserved iii Contents PagePD ISO/TS 21219-24:2017ISO/TS 21219-24:2017(E)9.2 Nonce 22 10 L TE Tables .23 10.1 lte001: LightEncryptionMode 23 Annex A (normative) TPEG application, TPEG-Binary Representation 24 Annex B (normative) TPEG application,
16、 TPEG-ML Representation 30 Annex C (informative) Light Encryption Guidelines 33 iv ISO 2017 All rights reservedPD ISO/TS 21219-24:2017ISO/TS 21219-24:2017(E) Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies).
17、The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-g
18、overnmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. The procedures used to develop this document and those intended for its further maintenance are describe
19、d in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives). Attention is drawn t
20、o the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the
21、ISO list of patent declarations received (see www .iso .org/ patents). Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement. For an explanation on the meaning of ISO specific terms and expressions related to conformity assessme
22、nt, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see the following URL: h t t p :/ www .iso .org/ iso/ foreword .html The committee responsible for this document is ISO/TC 204, Intelligent transport systems. A
23、list of all the parts in the ISO 21219 series can be found on the ISO website. ISO 2017 All rights reserved vPD ISO/TS 21219-24:2017ISO/TS 21219-24:2017(E) Introduction History TPEG technology was originally proposed by the European Broadcasting Union (EBU) Broadcast Management Committee, who establ
24、ished the B/TPEG project group in the autumn of 1997 with a brief to develop, as soon as possible, a new protocol for broadcasting traffic and travel-related information in the multimedia environment. TPEG technology, its applications and service features were designed to enable travel-related messa
25、ges to be coded, decoded, filtered and understood by humans (visually and/or audibly in the users language) and by agent systems. Originally, a byte-oriented data stream format, which may be carried on almost any digital bearer with an appropriate adaptation layer, was developed. Hierarchically stru
26、ctured TPEG messages from service providers to end-users were designed to transfer information from the service provider database to an end-users equipment. One year later, in December 1998, the B/TPEG group produced its first EBU specifications. Two documents were released. Part 2 (TPEG-SSF, which
27、became ISO/TS 18234-2) described the Syntax, Semantics and Framing structure, which was used for all TPEG applications. Meanwhile, Part 4 (TPEG- RTM, which became ISO/TS 18234-4) described the first application for Road Traffic Messages. Subsequently, in March 1999, CEN/TC 278, in conjunction with I
28、SO/TC 204, established a group comprising members of the former EBU B/TPEG and this working group continued development work. Further parts were developed to make the initial set of four parts enabling the implementation of a consistent service. Part 3 (TPEG-SNI, ISO/TS 18234-3) described the Servic
29、e and Network Information Application used by all service implementations to ensure appropriate referencing from one service source to another. Part 1 (TPEG-INV, ISO/TS 18234-1) completed the series by describing the other parts and their relationship; it also contained the application IDs used with
30、in the other parts. Additionally, Part 5, the Public Transport Information Application (TPEG-PTI, ISO/TS 18234-5), was developed. The so-called TPEG-LOC location referencing method, which enabled both map-based TPEG-decoders and non-map- based ones to deliver either map-based location referencing or
31、 human readable text information, was issued as ISO/TS 18234-6 to be used in association with the other applications parts of the ISO/TS 18234 series to provide location referencing. The ISO/TS 18234 series has become known as TPEG Generation 1. TPEG Generation 2 When the Traveller Information Servi
32、ces Association (TISA), derived from former forums, was inaugurated in December 2007, TPEG development was taken over by TISA and continued in the TPEG applications working group. It was about this time that the (then) new Unified Modelling Language (UML) was seen as having major advantages for the
33、development of new TPEG Applications in communities who would not necessarily have binary physical format skills required to extend the original TPEG TS work. It was also realized that the XML format for TPEG described within the ISO/TS 24530 series (now superseded) had a greater significance than p
34、reviously foreseen, especially in the content-generation segment and that keeping two physical formats in synchronism, in different standards series, would be rather difficult. As a result, TISA set about the development of a new TPEG structure that would be UML based. This has subsequently become k
35、nown as TPEG Generation 2. TPEG2 is embodied in the ISO/TS 21219 series and it comprises many parts that cover introduction, rules, toolkit and application components. TPEG2 is built around UML modelling and has a core of rules that contain the modelling strategy covered in ISO/TS 21219-2, ISO/TS 21
36、219-3, ISO/TS 21219-4 and the conversion to two current physical formats: binary and XML; others could be added in the future. TISA uses an automated tool to convert from the agreed UML model XMI file directly into an MS Word document file, to minimize drafting errors, that forms the Annex for each
37、physical format.vi ISO 2017 All rights reservedPD ISO/TS 21219-24:2017ISO/TS 21219-24:2017(E) TPEG2 has a three container conceptual structure: Message Management (ISO/TS 21219-6), Application (many Parts) and Location Referencing (ISO/TS 21219-7 1) ). This structure has flexible capability and can
38、accommodate many differing use cases that have been proposed within the TTI sector and wider for hierarchical message content. TPEG2 also has many Location Referencing options as required by the service provider community, any of which may be delivered by vectoring data included in the Location Refe
39、rencing container. The following classification provides a helpful grouping of the different TPEG2 parts according to their intended purpose. Toolkit parts: TPEG2-INV (ISO/TS 21219-1), TPEG2-UML (ISO/TS 21219-2), TPEG2-UBCR (ISO/TS 21219-3), TPEG2-UXCR (ISO/TS 21219-4), TPEG2-SFW (ISO/TS 21219-5), T
40、PEG2-MMC (ISO/TS 21219-6), TPEG2-LRC (ISO/TS 21219-7), TPEG2-LTE (ISO/TS 21219-24); Special applications: TPEG2-SNI (ISO/TS 21219-9), TPEG2-CAI (ISO/TS 21219-10); Location referencing: TPEG2-ULR (ISO/TS 21219-11 2) ), TPEG2-GLR (ISO/TS 21219-21 3) ), TPEG2- OLR (ISO/TS 21219-22 4) ); Applications: T
41、PEG2-PKI (ISO/TS 21219-14), TPEG2-TEC (ISO/TS 21219-15), TPEG2-FPI (ISO/TS 21219-16), TPEG2-TFP (ISO/TS 21219-18), TPEG2-WEA (ISO/TS 21219-19), TPEG2-RMR (ISO/TS 21219-23), TPEG2-EMI (ISO/TS 21219-25). TPEG2 has been developed to be broadly (but not totally) backward compatible with TPEG1 to assist
42、in transitions from earlier implementations, while not hindering the TPEG2 innovative approach and being able to support many new features, such as dealing with applications having both long-term, unchanging content and highly dynamic content, such as Parking Information. This document is based on t
43、he TISA specification technical/editorial version reference: SP14002/1.0/001 1) Under development. 2) To be published. 3) Under development. 4) Under development. ISO 2017 All rights reserved viiPD ISO/TS 21219-24:2017PD ISO/TS 21219-24:2017Intelligent transport systems Traffic and travel informatio
44、n (TTI) via transport protocol experts group, generation 2 (TPEG2) Part 24: Light encryption (TPEG2-L TE) 1 Scope This document defines the LTE encryption mechanism for TPEG Service Data Frames. It has been specifically designed for use with Business to Business (B2B) business models. The objective
45、of this document is to provide a simple to use, yet effective Conditional Access mechanism for TPEG including encryption for use with both broadcast and/or point-to-point delivery. For both service providers and device manufacturers, a standardized conditional access mechanism is beneficial to avoid
46、 a proliferation of proprietary methods with multiplied implementation effort and lead times. 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition c
47、ited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO/TS 21219-1, Intelligent transport systems (ITS) Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) Part 1: Introduction, numbering
48、and version (TPEG2-INV) ISO/TS 21219-2, Intelligent transport systems (ITS) Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) Part 2: UML modeling rules (TPEG2-UMR) ISO/TS 21219-3, Intelligent transport systems (ITS) Traffic and travel information (TTI)
49、via transport protocol experts group, generation 2 (TPEG2) Part 3: UML to binary conversion rules (TPEG2-UBCR) ISO/TS 21219-4, Intelligent transport systems (ITS) Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) Part 4: UML to XML conversion rules (TPEG2-UXCR) ISO/TS 21219-5, Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) Part 5: TPEG service framework (TPEG2-SFW) ISO/TS 21219-9, Traffic and travel information (TTI) via
