1、 ABSGUIDE FOR DYNAMIC LOADING APPROACH FOR FPSO INSTALLATIONS .2010 1 GUIDE FOR DYNAMIC LOADING APPROACH FOR FLOATING PRODUCTION, STORAGE AND OFFLOADING (FPSO) INSTALLATIONS MAY 2010 CORRIGENDA/EDITORIALS 1 February 2014 Page No. Paragraph Comments Foreword ii Foreword In second paragraph, reference
2、 “Section 1-1-2 of the ABS Guide for Building and Classing Floating Production Installations (FPI Guide)” to read “Section 1-1-2 of the ABS Rules for Building and Classing Floating Production Installations (FPI Rules)”. ii Foreword In second and third paragraphs, reference “FPI Guide” to read “FPI R
3、ules”. (2 places) Section 1 Introduction 1 1/1 In first paragraph, reference “ABS Guide for Building and Classing Floating Production Installations (FPI Guide)” to read “ABS Rules for Building and Classing Floating Production Installations (FPI Rules)”. 1 1/1 In first, second, third, and fifth parag
4、raphs, reference “FPI Guide” to read “FPI Rules”. (4 places) 1 1/3.1 Reference “FPI Guide” to read “FPI Rules”. (2 places) 2 1/3.1 In first paragraph and Item i), reference “FPI Guide” to read “FPI Rules”. (3 places) 4 1/5 In Item ii), reference “FPI Guide” to read “FPI Rules”. 4 1/5 In second parag
5、raph, reference “FPI Guide” to read “FPI Rules”. 5 1/5 In last paragraph, delete “published in December 2006”. Section 2 Load Cases 8 2/7.1 In Note, reference “FPI Guide” to read “FPI Rules”. 11 2/13 Reference “FPI Guide” to read “FPI Rules”. Section 3 Environmental Conditions 12 3/1 In first paragr
6、aph, reference “FPI Guide” to read “FPI Rules”. 15 3/7.1 Reference “FPI Guide” to read “FPI Rules”. (2 places) 16 3/7.5 In first paragraph, reference “FPI Guide” to read “FPI Rules”. (2 places) Corrigenda/Editorials 1 February 2014 2 ABSGUIDE FOR DYNAMIC LOADING APPROACH FOR FPSO INSTALLATIONS .2010
7、 Page No. Paragraph Comments Section 8 Internal Liquid Tank Pressure 30 8/1 Reference “FPI Guide” to read “FPI Rules”. 30 8/1 Reference “Section 5A-3-2/11 of the FPI Guide” to read “5A-3-2/11 of the FPI Rules”. 31 8/9 Reference “Section 5A-3-2/11 of the FPI Guide” to read “5A-3-2/11 of the FPI Rules
8、”. Section 11 Structural Analysis of the Hull Structure 36 11/1 In third paragraph, reference “FPI Guide” to read “FPI Rules”. 37 11/5 Reference “FPI Guide” to read “FPI Rules”. 37 11/7 In second-to-last paragraph, reference “Section 5A-1-4/3 of the FPI Guide” to read “5A-1-4/3 of the FPI Rules”. Se
9、ction 12 Acceptance Criteria 38 12/1 In second-to-last paragraph, reference “Floating, Production, Storage and Offloading” to read “Floating Production, Storage and Offloading”. 39 12/Table 1 Revise Table title and Table as follows: TABLE 1 Allowable Stresses for Watertight Boundaries Stress Limit O
10、rdinary Strength Steel (Sm= 1.000) HT27 (Sm= 0.980) HT32 (Sm= 0.950) HT36 (Sm= 0.908) HT40 (Sm= 0.875) c cfSmfy 23534 ccf2400 ccf34138 ccf25947 ccf2646 ccf37637 ccf29810 ccf3040 ccf43241 ccf32056 ccf3269 ccf46498 ccf34321 ccf3500 ccf49784 ccfN/cm2kgf/cm2lbf/in2Note: cfis to be taken as 0.95 for FE m
11、odel with gross scantlings. cfis to be taken as 1.0 for FE model with net scantlings. 40 12/5 In second paragraph, reference “FPI Guide” to read “FPI Rules”. (2 places) 41 12/5 In first paragraph, reference “FPI Guide” to read “FPI Rules”. Appendix 2 Buckling and Ultimate Strength Criteria 46 A2/1.1
12、 Reference “FPI Guide” to read “FPI Rules”. 46 A2/1.3 In Items ii), iii), iv), v), vi), reference “FPI Guide” to read “FPI Rules”. (5 places) 47 A2/3.1 In last paragraph, reference “FPI Guide” to read “FPI Rules”. 48 A2/5.1 In definition of fca, reference “FPI Guide” to read “FPI Rules”. 49 A2/5.1 I
13、n definition of be, reference “FPI Guide” to read “FPI Rules”. 49 A2/5.1 In last paragraph, reference “FPI Guide” to read “FPI Rules”. 49 A2/5.3 In definition of fct, reference “FPI Guide” to read “FPI Rules”. 49 A2/7.1 In definition of fcL, fcT, reference “FPI Guide” to read “FPI Rules”. Corrigenda
14、/Editorials 1 February 2014 ABSGUIDE FOR DYNAMIC LOADING APPROACH FOR FPSO INSTALLATIONS .2010 3 Appendix 2 Buckling and Ultimate Strength Criteria 50 A2/9.1 In first paragraph, reference “requirements 5A-3-4/7.9.2 of the FPI Guide” to read “requirements of 5A-3-4/7.9.2 of the FPI Rules”. 50 A2/9.1.
15、1 In third-from-last paragraph, reference “FPI Guide” to read “FPI Rules”. 50 A2/9.1.2 Reference “FPI Guide” to read “FPI Rules”. 51 A2/11.1.1 In last paragraph, reference “FPI Guide” to read “FPI Rules”. 51 A2/11.1.2 In definition of fTb, reference “FPI Guide” to read “FPI Rules”. 51 A2/11.1.2 In last paragraph, reference “FPI Guide” to read “FPI Rules”. 51 A2/11.3 Reference “FPI Guide” to read “FPI Rules”. (2 places) 51 A2/11.5 Reference “FPI Guide” to read “FPI Rules”. Appendix 3 Nominal Design Corrosion Values (NDCV) for FPSOs 52 A3/3.1 Reference “FPI Guide” to read “FPI Rules”.
