1、 ABSRULES FOR BUILDING AND CLASSING STEEL FLOATING DRY DOCKS .2009 1 RULES FOR BUILDING AND CLASSING STEEL FLOATING DRY DOCKS 2009 CORRIGENDA/EDITORIALS 1 July 2014 CORRIGENDA/EDITORIALS 10 September 2014 Page No. Paragraph Comments Part 2 Materials and Welding 11 - In Chapter 2 title, delete “Mater
2、ials for”. 11 - Revise title of Appendix 1 to read “List of Destructive and Nondestructive Tests Required for Materials and Responsibility for Verifying”. 11 - Revise title of Appendix 4 to read “Procedure for the Approval of Manufacturers of Hull Structural Steel”. 11 - Revise title of Appendix 5 t
3、o read “Procedure for the Approval of Manufacturers of Hull Structural Steels Intended for Welding with High Heat Input”. 11 - In Appendix 6 title, delete “Guide for”. 11 - In Appendix 7 title, delete “Guide for”. 11 - After Appendix 7, add new Appendix 8 “APPENDIX 8 Additional Approval Procedure fo
4、r Steel with Enhanced Corrosion Resistance Properties”. 11 - After Appendix 3, add new Appendix 9 “APPENDIX 9 Welding Procedure Qualification Tests of Steels for Hull Construction and Marine Structures”. Appendix 1 Comparison of the Numbering System of the 1977 Rules vs. 2009 Rules 44 Section 1 Revise last sentence to read “Those classification requirements specific to dry docks were retained in a supplemental Part 1 of the Floating Dry Dock Rules.”.
