1、ACI 332M-10(metric)Reported by ACI Committee 332Residential Code Requirementsfor Structural Concrete (ACI 332M-10)and CommentaryAn ACI StandardResidential Code Requirements for Structural Concrete and CommentaryFirst PrintingAugust 2010ISBN 978-0-87031-389-9American Concrete InstituteAdvancing concr
2、ete knowledgeCopyright by the American Concrete Institute, Farmington Hills, MI. All rights reserved. This materialmay not be reproduced or copied, in whole or part, in any printed, mechanical, electronic, film, or otherdistribution and storage media, without the written consent of ACI.The technical
3、 committees responsible for ACI committee reports and standards strive to avoid ambiguities,omissions, and errors in these documents. In spite of these efforts, the users of ACI documents occasionallyfind information or requirements that may be subject to more than one interpretation or may beincomp
4、lete or incorrect. Users who have suggestions for the improvement of ACI documents arerequested to contact ACI. Proper use of this document includes periodically checking for errata atwww.concrete.org/committees/errata.asp for the most up-to-date revisions.ACI committee documents are intended for th
5、e use of individuals who are competent to evaluate thesignificance and limitations of its content and recommendations and who will accept responsibility for theapplication of the material it contains. Individuals who use this publication in any way assume all risk andaccept total responsibility for
6、the application and use of this information.All information in this publication is provided “as is” without warranty of any kind, either express or implied,including but not limited to, the implied warranties of merchantability, fitness for a particular purpose ornon-infringement.ACI and its members
7、 disclaim liability for damages of any kind, including any special, indirect, incidental,or consequential damages, including without limitation, lost revenues or lost profits, which may resultfrom the use of this publication.It is the responsibility of the user of this document to establish health a
8、nd safety practices appropriate tothe specific circumstances involved with its use. ACI does not make any representations with regard tohealth and safety issues and the use of this document. The user must determine the applicability of allregulatory limitations before applying the document and must
9、comply with all applicable laws and regulations,including but not limited to, United States Occupational Safety and Health Administration (OSHA) healthand safety standards.Order information: ACI documents are available in print, by download, on CD-ROM, through electronicsubscription, or reprint and
10、may be obtained by contacting ACI.Most ACI standards and committee reports are gathered together in the annually revised ACI Manual ofConcrete Practice (MCP).American Concrete Institute38800 Country Club DriveFarmington Hills, MI 48331U.S.A.Phone: 248-848-3700Fax: 248-848-3701www.concrete.orgACI 332
11、M-10 supersedes 332-08, became effective May 18, 2010, and was publishedAugust 2010.Copyright 2010, American Concrete Institute.All rights reserved including rights of reproduction and use in any form or by anymeans, including the making of copies by any photo process, or by electronic ormechanical
12、device, printed, written, or oral, or recording for sound or visual reproductionor for use in any knowledge or retrieval system or device, unless permission in writingis obtained from the copyright proprietors.1ACI 332M-10The “Residential Code Requirements for Structural Concrete” cover thedesign an
13、d construction of cast-in-place concrete for one- and two-familydwellings and multiple single-family dwellings (townhouses), and theiraccessory structures.Among the subjects covered are the design and construction require-ments for plain and reinforced concrete footings, foundation walls, andslabs-o
14、n-ground, and requirements for concrete, reinforcement, forms, andother related materials.The quality and testing of materials discussed in this document arecovered by reference to the appropriate ASTM standards.The Code is written to allow for reference by adoption in a generalbuilding code without
15、 changing its language. Background details orsuggestions for carrying out the requirements or intent of the Code areprovided in the commentary. The commentary discusses some of theconsiderations of the committee in developing the Code with emphasisgiven to the explanation of provisions that may be u
16、nfamiliar to code usersor where significant departure exists from other concrete codes. Commentaryprovisions begin with an “R,” such as “R.1.1.1,” and commentary text isshown in italics.Relevant resource documents are cited for the user desiring moredetailed study of individual issues.Keywords: admi
17、xtures; aggregates; air entrainment; anchorage (structural);backfill; building codes; calcium chloride; cements; cold weather construction;compressive strength; concrete construction; concrete construction joints;concretes; contraction joints; cover; curing; flexural strength; floors;footings; formw
18、ork (construction); foundation walls; foundations; hotweather construction; inspection; loads (forces); materials; mixing; mixtureproportioning; placing; plain concrete; reinforced concrete; reinforcingsteels; residential; serviceability; specifications; slab-on-ground; slabs;sulfates exposure; stre
19、ngth; structural analysis; structural concrete; structuraldesign; walls; water; welded wire reinforcement.CONTENTSIntroduction, p. 2Chapter 1General, p. 31.1Scope1.2Alternative systems1.3Footings and foundation walls1.4Drawings and specifications1.5InspectionChapter 2Notation and definitions, p. 42.
20、1Notation2.2DefinitionsChapter 3Referenced standards, p. 5Chapter 4Materials, p. 64.1Concrete4.2Reinforcement4.3FormworkGabriel Domingo Alcaraz Kelvin L. Doerr Tarek S. Khan Royce J. RhoadsBrent D. Anderson Nader R. Elhajj Richard S. Kinchen James RogersRobert B. Anderson Robert L. Henry Joseph Knar
21、ich J. Edward SauterWilliam L. Arent Barry Herbert Lionel A. Lemay Robert E. SculthorpeJoseph S. Balik Geoffrey Hichborn, Sr. Warren E. McPherson, Jr. Donn C. ThompsonBob J. Banka Bret Houck Brian D. Miller Christopher R. TullRobert T. Bartley Scott R. Humphreys Gary L. Mochizuki Michael H. WeberCla
22、ude J. Bergeron Said Iravani T. George Muste Douglas C. WittlerKenneth B. Bondy Raj K. Jalla Anil K. Patnaik Kevin D. WolfMichael W. Cook Kirby Justesen Dale A. Phillips Carla V. YlandBarry A. Descheneaux Ashok M. KakadeMorris HuffmanChairJames R. Baty, IISecretaryResidential Code Requirements for S
23、tructural Concrete (ACI 332M-10) and CommentaryAn ACI StandardReported by ACI Committee 3322 CODE REQUIREMENTS FOR RESIDENTIAL CONCRETE (ACI 332M-10)American Concrete Institute Copyrighted Materialwww.concrete.orgChapter 5Concrete requirements, p. 75.1General requirements5.2Concrete properties5.3Con
24、crete cover5.4Calcium chlorideChapter 6Concrete production and placement,p. 96.1Concrete6.2Placement6.3Form removal6.4Finishing6.5Curing6.6Cold weather6.7Hot weatherChapter 7Footings, p. 107.1General7.2Design7.3ConstructionChapter 8Foundation walls, p. 138.1General8.2Design8.3ConstructionChapter 9De
25、sign for expansive soils, p. 169.1General9.2Expansive soil classification9.3DesignChapter 10Slabs-on-ground, p. 1710.1Design10.2Support10.3Forms10.4Thickness10.5Joints10.6ReinforcementAppendix APrescriptive tables for foundation walls, p. 18Commentary references, p. 29INTRODUCTIONThe commentary of A
26、CI 332M-10 discusses some of theconsiderations of Committee 332 in developing the provisionscontained in “Residential Code Requirements for StructuralConcrete (ACI 332M-10),” hereinafter called the “Code.”Explanation of the departure of this Code from ACI 318M isemphasized. Comments on specific prov
27、isions are made underthe corresponding chapter and section numbers of the Code.The commentary is not intended to provide a completehistorical background concerning the development of theCode, nor is it intended to provide a detailed rsum of thestudies and research data reviewed by the committee info
28、rmulating the Code.However, references to some research data are providedfor those who wish to study the background material indepth. The Code is meant to be used as part of a legallyadopted building code and, as such, must differ in formand substance from documents that provide detailedspecificatio
29、ns, recommended practice, or completedesign procedures.The Code is intended to cover all residential structures thatfall within the scope of the International Residential Code(IRC). Requirements more stringent than the Code provisionsmay be desirable for large, complex or irregular structures,high-h
30、azard areas, and other unusual construction. The Codeand commentary cannot replace sound engineering knowledge,experience, and judgment.A building code states only the minimum requirementsnecessary to provide for public health and safety. The Codeis based on this principle. For any structure, the ow
31、ner or thedesigner may require the quality of materials and constructionto be higher than the minimum requirements necessary toprotect the public as stated in the Code. However, lowerstandards are not permitted. The commentary directs attentionto other documents that provide suggestions for carrying
32、 outthe requirements and intent of the Code. However, thosedocuments and the commentary are not a part of the Code.The Code has no legal status unless adopted by governmentbodies having authority to regulate building design andconstruction. Where the Code has not been adopted, it mayserve as a refer
33、ence to good practice even though it has nolegal status.The Code provides a means of establishing minimumstandards for acceptance of designs and construction bylegally appointed building officials or their designatedrepresentatives. The Code and commentary are not intendedfor use in settling dispute
34、s between the owner, engineer,architect, contractor, or their agents, subcontractors, materialsuppliers, or testing agencies. Therefore, the Code cannotdefine the contract responsibility of each of the parties inconstruction. General references requiring compliance withthe Code in the project specif
35、ications should be avoidedbecause the contractor is rarely in a position to acceptresponsibility for design details or construction requirementsthat depend on detailed knowledge of the design. Design-build construction contractors, however, typically combinethe design and construction responsibility
36、. Generally, thedrawings, specifications, and contract documents shouldcontain all the necessary requirements to ensure compliancewith the Code. In part, this can be accomplished by referenceto specific Code sections in the project specifications. Other ACIpublications, such as ACI 301M, are written
37、 specifically for use ascontract documents for construction. Testing and certificationprograms should be provided for the individual partiesinvolved with the execution of work performed in accordancewith this Code.ACI 332.1R is a companion document to the Code thatprovides practical information abou
38、t the quality constructionof residential concrete elements conforming to this Code.ACI 332.1R provides detailed information on systems forproduction, placement, finishing, and testing residentialconcrete along with considerations for such issues as insulation,hot and cold weather precautions, curing
39、, and forming. ACI332.1R does not provide any further mandatory requirementsCODE REQUIREMENTS FOR RESIDENTIAL CONCRETE (ACI 332M-10) 3American Concrete Institute Copyrighted Materialwww.concrete.orgbut suggests ways of working within the scope of the Codeto deliver the highest quality residential co
40、ncrete.CHAPTER 1GENERAL1.1Scope1.1.1 This Code, when legally adopted as part of a generalbuilding code, provides minimum requirements for designand construction of residential concrete elements. In areaswithout a legally adopted building code, this Code definesminimum acceptable standards of design
41、and constructionpractice.R1.1.1 The user of this Code should consult the applicablegeneral building code for all applied loads to determine theapplicable values for design requirements. In the absence ofa governing code, the user should consider the use of ASCE/SEI 7 to determine applicable loads.1.
42、1.2 This Code supplements the general building codeand governs matters pertaining to design and construction ofcast-in-place concrete construction for one- and two-familydwellings and multiple single-family dwellings (town-houses), and their accessory structures, except wherever thisCode conflicts w
43、ith requirements in the legally adoptedgeneral building code.1.1.3 Where this Code conflicts with requirementscontained in other standards referenced in this Code, thisCode shall govern.R1.1.3 The IRC references this Code. Where the design ofan element is initiated with this Code from reference by t
44、heIRC, the entire design of the element must be completedusing the provisions of this Code.1.1.4 This Code is limited to design and construction ofconcrete footings, including thickened slab footings, wallfootings, and isolated footings; concrete basement or foun-dation walls constructed with remova
45、ble forms or with flatinsulating concrete forms; and concrete slabs-on-ground.R1.1.4 The design and construction requirements forfootings, foundation walls, and slabs-on-ground areincluded in this Code, together with requirements forconcrete, reinforcement, forms, and other related materials.1.1.5 W
46、here the scope of this Code and the scope of ACI318M coincide, design in accordance with ACI 318M shallbe permitted for all buildings and structures, and all partsthereof, within the scope of this Code.1.1.6 This Code does not govern design and constructionof insulating concrete form walls with a wa
47、ffle or screenconfiguration; precast wall elements; above-grade concretewalls; deep foundation systems, such as piles, drilled piers,or caissons; and elevated concrete slabs.R1.1.6 Provisions for application of precast wall elementsare found in the International Residential Code (IRC) andother publi
48、cations. The provisions for above-grade concretewalls are currently available in the 2009 IRC based on thePCA 100 Standard or directly found in the PCA 100 Standard.1.1.7 This Code does not govern the design and application ofsystems for surface drainage, waterproofing, dampproofing,and the ventilat
49、ion of radon gases.R1.1.7 Guidance on the type and application of systemsfor drainage, waterproofing, dampproofing, and radon gasventilation are commonly found in the general building code.1.1.8 When a building or structure contains elements thatexceed the limits of this Code or otherwise do not conformto this Code, these elements shall be designed in accordancewith ACI 318M.1.1.9 Where permitted by the statutes of the jurisdictionwhere the project is to be constructed, construction documentsfor residences designed by the provisions of th
