STAS SR ISO 3755-1995 Cast carbon steels for general engineering purposes《一般工程用途的铸造碳钢 》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

NB T 47011-2010 锆制压力容器.pdf

NB T 47014-2011 承压设备焊接工艺评定.pdf

NB T 47015-2011 压力容器焊接规程.pdf

NB T 47016-2011 承压设备产品焊接试件的力学性能检验.pdf

NB T 47017-2011 压力容器视镜.pdf

NB T 47018.1-2011 承压设备用焊接材料订货技术条件 第1部分：采购通则.pdf

NB T 47018.2-2011 承压设备用焊接材料订货技术条件 第2部分：钢焊条.pdf

NB T 47018.3-2011 承压设备用焊接材料订货技术条件 第3部分：气体保护电弧焊钢焊丝和填充丝.pdf

NB T 47018.4-2011 承压设备用焊接材料订货技术条件 第4部分：埋弧焊钢焊丝和焊剂.pdf