STAS SR ISO 7539-3-1994 Corrosion of metals and ailoys Stress corrosion testing Part 3 Preparation and use of U-bend specimens《金属和合金的腐蚀 应力腐蚀试验 第3部分：U形弯头试样的制备和应用》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

JB T 5194-1991 照相机检查计数抽样程序及抽样表（适用于连续批的检查）.pdf

JB T 5195-1991 照相机互换性结构件技术要求的测量方法.pdf

JB T 5196-1991 摄影闪光曝光表.pdf

JB T 5196-2014 摄影闪光曝光表.pdf

JB T 5198-2007 模锻螺旋压力机 精度.pdf

JB T 5200-2012 闭式四点压力机 精度.pdf

JB T 5201-1991 滚丝机 基本参数.pdf

JB T 5201.1-1999 滚丝机 精度.pdf

JB T 5201.1-2007 滚丝机 第1部分 精度.pdf