STAS SR ISO 8662-3-1996 UNELTE MANUALE PORTABILE CU MOTOR M SURAREA VIBRA IILOR PE M NER Partea 3 Ciocane perforatoare i perforatoare rotative《手提便携式电动工具 手柄处振动测量 第3部分：岩石钻机和旋转锤》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

HB 1964-1975 对角导柱矩形纵向封闭式冲裁模典型组合.pdf

HB 1965-1975 对称导柱矩形纵向封闭式冲裁模典型组合.pdf

HB 1966-1975 后导柱矩形横向封闭式冲裁模典型组合.pdf

HB 1967-1975 对角导柱矩形横向封闭式冲裁模典型组合.pdf

HB 1968-1975 后导柱矩形复合式冲裁模典型组合.pdf

HB 1969-1975 对角导柱矩形复合式冲裁模典型组合.pdf

HB 1970-1975 对称导柱矩形复合式冲裁模典型组合.pdf

HB 1971-1975 后导柱圆形复合式冲裁模典型组合.pdf

HB 1972-1975 对称导柱圆形复合式冲裁模典型组合.pdf