STAS 10334 3-1985 MINE SCRAPER CONVEYORS AND LINK CHAINS OF ROUND STEEL SCRAPERS Types and main dimensions《煤矿刮板输送和圆钢刮板连接链条 类型和主要尺寸》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

HB 6908-1994 数控铣床用四齿莫氏锥柄端刃过中心粗加工立铣刀 d=10~30mm.pdf

HB 6909-1994 数控铣床用六齿莫氏锥柄粗加工立铣刀 d=32~63mm.pdf

HB 691-1992 加工深槽用错齿三面刃铣刀 D=80~200mm.pdf

HB 6910-1994 数控铣床加工铝合金用二齿削平型直柄钻铣式粗加工立铣刀 d=10~30mm.pdf

HB 6911-1994 数控铣床加工铝合金用三齿削平型直柄粗加工立铣刀 d=25~45mm.pdf

HB 6912-1994 数控铣床加工铝合金用三齿削平型有柄端刃过中心粗加工立铣刀 d=25~45mm.pdf

HB 6913-1994 数控铣床加工铝合金用二齿莫氏锥柄钻铣式粗加工立铣刀d=10~30mm.pdf

HB 6914-1994 数控铣床加工铝合金用三齿莫氏锥柄粗加工立铣刀d=25~63mm.pdf

HB 6915-1994 数控铣床加工铝合金用三齿莫氏锥柄端刀过中心粗加工立铣刀d=25~63mm.pdf