STAS 11020-1978 STEEL NEEDLES FOR SPINNING MACHINES Diameters《纺纱机的钢针的直径 》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GB T 18223-2000 木工机床 升降台 术语.pdf

GB T 18224-2008 桥式抓斗卸船机安全规程.pdf

GB T 18225-2000 水路客运术语.pdf

GB T 18226-2015 公路交通工程钢构件防腐技术条件.pdf

GB T 18227-2000 航空货运集装板技术条件和试验方法.pdf

GB T 18228-2000 航空货运集装板网技术条件和试验方法.pdf

GB T 18229-2000 CAD工程制图规则.pdf

GB T 18230.1-2000 栓接结构用大六角头螺栓 螺纹长度按GB T 3106 C级 8.8和10.9级.pdf

GB T 18230.2-2000 栓接结构用大六角头螺栓 短螺纹长度 C级 8.8 和 10.9级.pdf