STAS 12317-1985 Textile machinery and accessories CYLINDRICAL TUBES Recommended values of inner diameters and lengths《纺织机械和附件圆柱管推荐的内部直径和长度值 》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

HB 7756.10-2005 基于CATIA建模要求 第10部分：地板件.pdf

HB 7756.14-2005 基于CATIA建模要求 第14部分：线束敷设.pdf

HB 7756.2-2005 基于CATIA建模要求 第2部分：坐标系.pdf

HB 7756.4-2005 基于CATIA建模要求 第4部分：机体结构件.pdf

HB 7756.5-2005 基于CATIA建模要求 第5部分：机加件.pdf

HB 7756.6-2005 基于CATIA建模要求 第6部分：锻铸件.pdf

HB 7772-2005 环氧树脂-碳纤维预浸料规范.pdf

HB 7774.1-2005 基于UG航空发动机建模要求 第1部分：通用要求.pdf

HB 7774.2-2006 基于UG航空发动机建模要求 第2部分：机匣.pdf