STAS 12600-1987 Hydrostatic drives PROPORTIONAL PRESSURE VALVES NP 200 bar Types and main dimensions《静压驱动 比例压力阀NP200 杆，类型和主要尺寸 》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

JB T 4177.1-2013 直齿锥齿轮刨齿机 第1部分 型式与参数.pdf

JB T 4177.2-1999 直齿锥齿轮刨齿机.精度检验.pdf

JB T 4181.1-2014 立式外拉床 第1部分 参数.pdf

JB T 4181.2-2014 立式外拉床 第2部分 技术条件.pdf

JB T 4182.1-2011 立式内拉床.第1部分：型式与参数.pdf

JB T 4182.2-2011 立式内拉床.第2部分：静刚度.pdf

JB T 4182.3-2006 立式内拉床.第3部分：技术条件.pdf

JB T 4183.2-2014 立轴矩台平面磨床 第2部分 技术条件.pdf

JB T 4183.3-2006 立轴矩台平面磨床 参数.pdf