STAS 10093 2-1985 Metrology QUANTITIES AND UNITS OF MEASURE Terminology《计量学 测量的数量和单位 术语 》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SJ Z 2808-2015 印制板组装件热设计.pdf

SJ Z 2815-1987 逐批检查计数抽样程序及抽样表（适用于孤立批的检查）.pdf

SJ Z 2924-1988 振动冲击隔离系统优化设计.技术导则.pdf

SJ Z 2926-1988 集成电路制版设备性能测试方法.pdf

SJ Z 2927-1988 集成电路制版设备名词术语.pdf

SJ Z 3200-1989 电子工业典型焊接工艺铜波导手工火焰银钎焊.pdf

SJ Z 3201-1989 电子工业典型焊接工艺铝波导手工火焰钎焊.pdf

SJ Z 3202-1989 电子工业典型焊接工艺电子束焊接.pdf

SJ Z 3216-1989 电子产品防护、包装和装箱等级.pdf