STAS 6649-1974 Engineering drawings CYLINDRICAL WORM GEARS Indication of toothings on drawing《工程制图 圆柱形蜗轮 在工程图上标识齿轮 》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SJ Z 2603-1985 单相变压器和阻流圈用XCD型C型铁芯结构配件图册.pdf

SJ Z 2655-1986 锗单晶缺陷图集.pdf

SJ Z 2740-1986 电子工业企业质量保证体系指南.pdf

SJ Z 2921-1988 开关电源变压器计算方法.pdf

SJ Z 2922-1988 电子设备用变压器、阻流圈噪声抑制方法（指导性技术文件）.pdf

SJ Z 2976-1988 电子器件用钎料物理性能检测方法.钎焊脱焊温度的测定.pdf

SJ Z 3206.1-1989 发射光谱分析实验室的一般要求.pdf

SJ Z 3206.10-1989 发射光谱定性分析方法通则.pdf

SJ Z 3206.11-1989 发射光谱定量分析方法通则.pdf