STAS 7232-1984 Hydraulic and pneumatic drives NOMINAL CAPACITIES《液压和气动驱动设备 标称容量 》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SJ T 31176-1994静态特性试验机完好要求和检查评定方法.pdf

SJ T 31202-1994 H44015-2型8位自动蒸铝机完好要求和检查评定方法.pdf

SJ T 31204-1994 L3080-1／YN型34工位烘干机完好要求和检查评定方法.pdf

SJ T 31205-1994 TDK-8511型双排32位玻壳荧光粉沉淀机完好要求和检查评定方法.pdf

SJ T 31206-1994 玻壳清洗机完好要求和检查评定方法.pdf

SJ T 31225-1994 屏面细研磨机、屏面抛光机完好要求和检查评定方法.pdf

SJ T 31228-1994 S7-14LS颚式 破碎机完好要求和检查评定方法.pdf

SJ T 31232-1994 PSP-53CS型印刷机完好要求和检查评定方法.pdf

SJ T 31234-1994 WPBK616型工作台可升降厚膜印刷机完好要求和检查评定方法.pdf