STAS 7757 10-1979 POLYETHYLENE INSULATED COAXIAL CABLES COAXIAL CABLES TCC2Y-I 1x1 10-75 Special technical requirements for quality《聚乙烯绝缘同轴电缆 同轴电缆TCC2Y I 1x1，10 75 质量的特殊技术要求 》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

HB 695-1979 加工轻合金用镶高速钢刀齿的三面刃铣刀D=80~180mm.pdf

HB 696-1979 加工轻合金用镶高速钢刀齿的三面刃铣刀D=200~315mm.pdf

HB 697-1979 可调节三面刃铣刀D=63~125mm.pdf

HB 6996-1994 加工钛合金MJ螺纹带前引导的修正牙型螺母丝锥.d=3～3.5mm p=0.5～0.6mm.pdf

HB 6997-1994 加工钛合金MJ螺纹带前引导的修正牙型螺母丝锥.技术条件.pdf

HB 6998.1-1994 正弦工具.窄型正弦尺.pdf

HB 6998.10-1994 正弦工具.技术条件.pdf

HB 6998.2-1994 正弦工具.宽型正弦尺.pdf

HB 6998.3-1994 正弦工具.单正弦T形槽工作台.pdf