STAS 8251-1982 Testing of metals ROCKWELL HARDNKSS TKST ON CONVEX GURVED SURFACES A B C F G seals and superficial N and 《金属测试 在凸曲面上进行洛氏硬度测试A、B、C、F、G密封和表面N和 》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

HB 729-1979 单角铣刀 D＝40-80mm.pdf

HB 7295-1996 飞机强度和刚度地面试验系统校准方法和要求.pdf

HB 7297-1996 插头－锥管式空中加油座舱控制和显示.pdf

HB 730-1979 不对称双角铣刀 D＝40-100mm.pdf

HB 7301-1996 加工300M钢的普通螺纹滚丝轮.54型 d=3～38nn p=0.5～2mm.pdf

HB 7302-1996 加工300M钢的普通螺纹滚丝轮.45型 d=3～8mm p=0.5～1mm.pdf

HB 7303-1996 加工300M钢的普通螺纹滚丝轮.技术条件.pdf

HB 7304-1996 加工300M钢的机用和手用丝锥.d=3～6mm P=0.5～1mm.pdf

HB 7305-1996 加工300M钢的机用和手用丝锥.d=7～10mm P=1～1.5mm.pdf