STAS 8537-1985 Hydraulic power FILTERS Special technical requirements for quality《液压动力 滤波器 特殊质量技术要求 》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GB T 14322-1993 普通磨料精微粉(W3.5-W0.5)粒度组成测定方法.pdf

GB T 14324-1993 电容液位计.pdf

GB T 14325-1993 辐射防护最优化纲要.pdf

GB T 14326-1993 苯中二硫化碳含量的测定方法.pdf

GB T 14327-1993 苯中噻吩含量的测定方法.pdf

GB T 14328.1-1993 直柄粗加工立铣刀型式与尺寸.pdf

GB T 14328.2-1993 削平型直柄粗加工立铣刀型式与尺寸.pdf

GB T 14328.3-1993 莫氏锥柄粗加工立铣刀型式与尺寸.pdf

GB T 14328.4-1993 粗加工立铣刀 技术条件.pdf