STAS 8600-1979 Non-industrial industrial and agriculture buildings TOLERANCES AND ASSEMBLINGS FOR BUILDINGS Tolerance systems《非工业 工业和农业建筑 建筑物的公差和装配 公差制度 》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

QJ 826-1984 计算机自动测量和控制(CAMAC)术语的定义.pdf

QJ 827-1984 计算机自动测量和控制(CAMAC)实时语言(BASIC).pdf

QJ 828-1992 电子设备电源型号编制方法.pdf

QJ 829-1984 航天用电源变换器、发电机组的电压、功率和频率等级.pdf

QJ 829A-1995 电源变换器电压、电流和频率系列.pdf

QJ 830-1984 未注形状和位置公差的规定.pdf

QJ 831-1985 航天用多层印制电路板技术条件.pdf

QJ 831A-1998 航天用多层印制电路板通用规范.pdf

QJ 832-1985 航天用多层印制电路板试验方法.pdf