STAS 1472-1980 Unfinished bolts SQUARE HEADED SCREWS Dimensions《毛螺栓 方头螺丝 尺寸》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

JB T 4362-2011 电站轴流式通风机.pdf

JB T 4364-1999 风机配套消声器 性能试验方法.pdf

JB T 4364-2014 风机配套消声器 性能试验方法.pdf

JB T 4365-1997 专用的润滑、轴密封和控制油系统.pdf

JB T 4366.1-1999 落地铣镗床 主轴端部 镗轴端部尺寸.pdf

JB T 4366.1-2011 落地铣镗床 主轴端部第1部分 镗轴端部尺寸.pdf

JB T 4366.2-1999 落地铣镗床 主轴端部 铣轴端部尺寸.pdf

JB T 4366.2-2011 落地铣镗床 主轴端部第2部分 铣轴端部尺寸.pdf

JB T 4366.3-1999 落地铣镗床 主轴端部 主轴端面键尺寸.pdf