STAS 1683-1980-1 END MILL CUTTER WITH TAPER SHANK Uimensions《带有锥柄的立铣刀》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

HB 6658-1992 轻度交联有机玻璃交联度试验方法.pdf

HB 6659-1992 定向有机玻璃消向应力和消向温度试验方法.pdf

HB 666-1979 加工轻合金用镶螺旋硬质合金刀片的立铣刀D=18~50mm.pdf

HB 6660-1992 金属板材热疲劳试验方法.pdf

HB 6661-1992 飞机滑油注油嘴头部.pdf

HB 6662-1992 航空管子外径与壁厚尺寸.pdf

HB 6663-1992 识别飞机液压部件所适用液压油的标记.pdf

HB 6664-1992 飞机管路系统用块形管夹设计要求和鉴定试验方法.pdf

HB 6665-1992 流体管路安装用P型卡箍包络尺寸.pdf