STAS 259 1-1970 RAW TIMBER FOR PULP INDUSTRY General requirements《纸浆工业用的原木 一般要求》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GB T 19347.2-2005 特殊环境条件 轨道车辆结构用铝合金挤压型材.pdf

GB T 19348.1-2003 无损检测 工业射线照相胶片 第1部分;工业射线照相胶片系统的分类.pdf

GB T 19349-2003 金属和其他无机覆盖层为减少氢脆危险的钢铁预处理.pdf

GB T 19350-2003 金属和其他无机覆盖层为减少氢脆危险的涂覆后钢铁的处理.pdf

GB T 19357-2003 包装机械分类.pdf

GB T 19363.1-2003 翻译服务规范 第1部分 笔译.pdf

GB T 19365-2003 自行式林业机械 术语、定义和分类.pdf

GB T 19366-2003 林业机械 液压起重臂 双手把的操作位置和操作方法.pdf

GB T 19367.1-2003 人造板 板的厚度、宽度及长度的测定.pdf