STAS 5326-1979 SCREW THREAD FOR CYCLES Nominal prolile and sizes《螺纹 标准外形和尺寸》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

QC T 511-1999 汽车柴油机喷油器针阀偶件技术条件.pdf

QC T 512-1999 汽车柴油机用喷油泵及喷油器清洁度测定方法及限值.pdf

QC T 513-1999 汽车前轴台架疲劳寿命试验方法.pdf

QC T 514-1999 轿车车身名词术语.pdf

QC T 515-1999 汽车发动机用调温器型式与尺寸.pdf

QC T 515-2000 汽车发动机用调温器型式与尺寸.pdf

QC T 516-1999 汽车发动机轴瓦锡基和铅基合金金相标准.pdf

QC T 517-1999 汽车钢板弹簧用U形螺栓及螺母技术条件.pdf

QC T 518-1999 汽车用螺纹紧固件拧紧扭矩规范.pdf