STAS 553 4-1980 SWITCHGEAR UP TO 1000 V A.C AND 1200 V D C AND UP TO 4000 A A.C AND D.C Rules and test methods《1000 V 交流1200 V 直流 4000 A 交流和直流的开关装置 规则和测试方法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

JB T 8771.7-1998 加工中心.检验条件.第7部分 精加工试件精度检验.pdf

JB T 8772.1-1998 精密加工中心.检验条件.第1部分 卧式和带附加主轴头机床几何精度检验(水平Z轴).pdf

JB T 8772.2-1998 精密加工中心.检验条件.第2部分 立式加工中心几何精度检验.pdf

JB T 8772.4-1998 精密加工中心.检验条件.第4部分 线性和回转同线的定位精度和重复定位精度检验.pdf

JB T 8772.5-1998 精密加工中心.检验条件.第5部分 工件夹持托板的定位精度和重复定位精度检验.pdf

JB T 8772.7-1998 精密加工中心.检验条件.第7部分 精加工试件精度检验.pdf

JB T 8773-1998 精密加工中心.技术条件.pdf

JB T 8774.1-1998 机床电气系统辅件.扎带.pdf

JB T 8774.11-1998 机床电气系统辅件.三通法兰式管接头.pdf