1、 Rules for Building and Classing Steel Barges RULES FOR BUILDING AND CLASSING STEEL BARGES 2018 American Bureau of Shipping Incorporated by Act of Legislature of the State of New York 1862 2017 American Bureau of Shipping. All rights reserved. ABS Plaza 16855 Northchase Drive Houston, TX 77060 USA T
2、able of Contents RULES FOR BUILDING AND CLASSING STEEL BARGES CONTENTS Notices and General Information . 1 PART 1 Conditions of Classification (Supplement to the ABS Rules for Conditions of Classification) . 6 CHAPTER 1 Scope and Conditions of Classification . 8 See also separately published booklet
3、 ABS Rules for Conditions of Classification (Part 1) PART 2 Materials and Welding 16 See separately published booklet ABS Rules for Materials and Welding (Part 2) PART 3 Hull Construction and Equipment . 17 CHAPTER 1 General 18 CHAPTER 2 Hull Structures and Arrangements . 30 CHAPTER 3 Equipment 117
4、CHAPTER 4 Testing, Trials and Surveys During Construction Hull 134 CHAPTER 5 Safety Requirements for Barges with Personnel . 147 PART 4 Barge Systems and Machinery . 155 CHAPTER 1 Machinery, Piping and Electrical Systems . 156 PART 5 Specific Barge Types . 173 CHAPTER 1 Dry Cargo Barges 174 CHAPTER
5、2 Tank Barges . 194 CHAPTER 3 Other Barge Types . 254 PART 7 Surveys After Construction . 303 See separately published booklet ABS Rules for Survey After Construction (Part 7) ii ABSRULES FOR BUILDING AND CLASSING STEEL BARGES .2018 Notices and General Information Notices and General Information CON
6、TENTS Introduction . 2 TABLE 1 Applicable Editions of Booklets Comprising 2018 Barge Rules . 3 TABLE 2 Division and Numbering of Rules 3 Rule Change Notice (2018) 4 TABLE 3 Summary of Changes from the 2017 Rules 4 ABSRULES FOR BUILDING AND CLASSING STEEL BARGES .2018 1 Notices and General Informatio
7、n Introduction 1. The year 2018 edition of the Rules for Building and Classing Steel Barges consists of the eight (8) booklets as shown in Table 1. With regard to three booklets, Part 1, Part 2, and Part 7: a) The purpose of the generic title ABS Rules for Conditions of Classification (Part 1) is to
8、 reflect the expanded contents of PART 1, as a result of including consolidated requirements for “Classification” applicable to all types of and sizes of vessels, barges and specific shipboard arrangements/systems, etc., except for those in offshore service, as specified in the Foreword to Part 1. A
9、dditional specific requirements are contained in Part 1 of these Rules for Building and Classing Steel Barges. b) The purpose of the generic title ABS Rules for Materials and Welding of PART 2 is to emphasize the common applicability of the requirements to ABS-classed vessels, other marine structure
10、s and their associated machinery, and thereby make PART 2 more readily a common “PART” of various ABS Rules and Guides, as appropriate. c) The purpose of the generic title ABS Rules for Survey After Construction (Part 7) is to reflect the expanded contents of PART 7, as a result of including consoli
11、dated requirements for “Surveys After Construction” applicable to all types and sizes of vessels, barges and specific shipboard arrangements/systems, etc., as specified in Part 7, Chapter 1, Section 1. 2. The numbering system applied in the Rules is shown in Table 2. 3. The primary changes from the
12、2017 edition of the Rules are identified and listed in Table 3. The effective date of the indicated Rule Changes is 1 January 2018, unless specifically indicated otherwise. 4. The effective date of each technical change since 1993 is shown in parenthesis at the end of the subsection/paragraph titles
13、 within the text of each Part. Unless a particular date and month are shown, the years in parentheses refer to the following effective dates: (2000) and after 1 January 2000 (and subsequent years) (1996) 9 May 1996 (1999) 12 May 1999 (1995) 15 May 1995 (1998) 13 May 1998 (1994) 9 May 1994 (1997) 19
14、May 1997 (1993) 11 May 1993 5. Until the next edition of the Rules for Building and Classing Steel Barges is published, Notices and/or Corrigenda, as necessary, will be published on the ABS website www. eagle.org only, and will be available free for downloading. It is not intended to publish hard co
15、pies of future Notices and/or Corrigenda to existing Rules or Guides. The consolidated edition of the Rules for Building and Classing Steel Barges, which includes Notices and/or Corrigenda using different colors for easy recognition, will be published on the ABS website only when Notices and/or Corr
16、igenda are issued. 6. The listing of CLASSIFICATION SYMBOLS AND NOTATIONS is available from the ABS website www.eagle.org for download. 2 ABSRULES FOR BUILDING AND CLASSING STEEL BARGES .2018 Notices and General Information TABLE 1 Applicable Editions of Booklets Comprising 2018 Barge Rules Rules fo
17、r Building and Classing Steel Barges Notices and General Information 2018 Part 1: Conditions of Classification (Supplement to the ABS Rules for Conditions of Classification) (1)2018 Part 3: Hull Construction and Equipment 2018 Part 4: Barge Systems and Machinery 2018 Part 5: Specific Barge Types 201
18、8 Rules for Conditions of Classification not included (1,2)Part 1: Rules for Conditions of Classification 2018 Rules for Materials and Welding not included (2)Part 2: Rules for Materials and Welding 2018 Rules for Survey After Construction not included (2)Part 7: Surveys After Construction 2018 Note
19、s: 1 The requirements for conditions of classification are contained in the separate, generic ABS Rules for Conditions of Classification (Part 1). Additional specific requirements are contained in Part 1 of these Rules. 2 The latest edition of these Rules is to be referred to. These Rules may be dow
20、nloaded from the ABS website at www.eagle.org, Rules and Guides, Downloads or may be ordered separately from the ABS Publications online catalog at www.eagle.org, Rules and Guides, Catalog. TABLE 2 Division and Numbering of Rules Division Number Part Part 1 Chapter Part 1, Chapter 1 Section Section
21、1-1-1 Subsection (see Note 1) 1-1-1/1 Paragraph (see Note 1) 1-1-1/1.1 Subparagraph 1-1-1/1.1.1 Item 1-1-1/1.1.1(a) Subitem 1-1-1/1.1.1(a)i) Appendix Appendix 1-1-A1 or Appendix 1-A1-1 Note: 1 An odd number (1, 3, 5, etc.) numbering system is used for the Rules. The purpose is to permit future inser
22、tions of even-numbered paragraphs (2, 4, 6, etc.) of text and to avoid the necessity of having to renumber the existing text and associated cross-references, as applicable, within the Rules and associated process instructions, check sheets, etc. ABSRULES FOR BUILDING AND CLASSING STEEL BARGES .2018
23、3 Notices and General Information Rule Change Notice (2018) TABLE 3 Summary of Changes from the 2017 Rules Notice No. 1 (effective on 1 July 2017) to the 2017 Rules, which is incorporated into the 2018 Rules, is summarized below. EFFECTIVE DATE 1 July 2017 shown as (1 July 2017) (based on the contra
24、ct date for new construction between builder and Owner) Part/Para. No. Title/Subject Status/Remarks PART 5 Specific Barge Types 5-2-3/1.11 Deck Cargo To permit necessary trade to remotely located geographic locations. (Incorporates Notice No. 1) 5-3-3/5.7.3 Acceptable Stresses To align allowable str
25、esses with the ABS Guide for Certification of Lifting Appliances as well as the ABS Rules for Building and Classing Offshore Support Vessels. (Incorporates Notice No. 1) 5-3-4/5.5.3 Allowable Stresses To align allowable stresses with the ABS Guide for Certification of Lifting Appliances as well as t
26、he ABS Rules for Building and Classing Offshore Support Vessels. (Incorporates Notice No. 1) EFFECTIVE DATE 1 January 2018 shown as (2018) (based on the contract date for new construction between builder and Owner) Part/Para. No. Title/Subject Status/Remarks PART 3 Hull Construction and Equipment 3-
27、2-4/3.1 Channel Construction To specify that floating corners are not allowed in the construction of ocean barges. 3-2-4/Figure 2A (New) Side Channels Attached to Deck and Bottom Plating To specify that floating corners are not allowed in the construction of ocean barges. 3-2-4/Figure 2B (New) Side
28、Channels Attached to Deck and Bottom Plating To specify that floating corners are not allowed in the construction of ocean barges. 3-2-4/3.11 Minimum Thicknesses To limit the maximum required thickness for girders and webs, in line with other ABS Rules. 3-2-5/3.15.2 Stanchions To modify the permissi
29、ble load to consider material yield strength. 3-2-7/3.5.3 Proportions To limit the maximum required thickness for girders and webs, in line with other ABS Rules. 3-2-11/5.9 (New) Bolted Connections To specify requirements for bolted connections on helidecks. 3-2-11/7.7 Means of Escape and Access To
30、clarify the requirements for aluminum helideck escape stairs and intermediate platforms. 3-4-1 Tank, Bulkhead and Rudder Tightness Testing To reflect the comments from Administrations, Industry Organizations and IMO considered during review of the proposed Testing Guidelines associated with SOLAS Ch
31、apter II-1, Regulation 11, reflected in IACS UR S14 (Rev.6, Sept 2016). PART 4 Barge Systems and Machinery 4-1-1/1.1 Machinery and Equipment To clarify ABS minimum requirements for diesel engines having a rated power of 100 kW (135 hp) and over, intended for services considered not essential for pro
32、pulsion, maneuvering and safety. 4 ABSRULES FOR BUILDING AND CLASSING STEEL BARGES .2018 Notices and General Information Part/Para. No. Title/Subject Status/Remarks PART 5 Specific Barge Types 5-1-1/15.3 Stanchions To modify the permissible load to consider material yield strength. 5-2-1/1.3 Scantli
33、ngs To include requirements for the employment of independent tanks for carrying cargo temperature above 200C and guidance regarding the construction of FEA models and acceptance criteria. 5-2-2/1.3 Scantlings To include requirements for the employment of independent tanks for carrying cargo tempera
34、ture above 200C and guidance regarding the construction of FEA models and acceptance criteria. 5-2-3/1.3 Scantlings To include requirements for the employment of independent tanks for carrying cargo temperature above 200C and guidance regarding the construction of FEA models and acceptance criteria.
35、 5-2-4/1.3 Scantlings To include requirements for the employment of independent tanks for carrying cargo temperature above 200C and guidance regarding the construction of FEA models and acceptance criteria. 5-3-1/9.3 Barge Hull Structure To clarify that a barge may be assigned the SC, SHCM Notation.
36、 ABSRULES FOR BUILDING AND CLASSING STEEL BARGES .2018 5 PART Part 1: Conditions of Classification (Supplement to the ABS Rules for Conditions of Classification) 1 Conditions of Classification (Supplement to the ABS Rules for Conditions of Classification) CONTENTS CHAPTER 1 Scope and Conditions of C
37、lassification . 8 Section 1 Classification 9 Section 2 Classification Symbols and Notations 10 Section 3 Rules for Classification 13 Section 4 Submission of Plans 14 6 ABSRULES FOR BUILDING AND CLASSING STEEL BARGES .2018 PART Foreword 1 Foreword (1 January 2008) For the 2008 edition, Part 1, “Condi
38、tions of Classification” was consolidated into a generic booklet, entitled Rules for Conditions of Classification (Part 1) for all vessels other than those in offshore service. The purpose of this consolidation was to emphasize the common applicability of the classification requirements in “Part 1”
39、to ABS-classed vessels, other marine structures and their associated machinery, and thereby make “Conditions of Classification” more readily a common Rule of the various ABS Rules and Guides, as appropriate. Thus, this supplement specifies only the unique requirements applicable to steel barges. Thi
40、s supplement is always to be used with the aforementioned Rules for Conditions of Classification (Part 1). ABSRULES FOR BUILDING AND CLASSING STEEL BARGES .2018 7 PART Chapter 1: Scope and Conditions of Classification 1 CHAPTER 1 Scope and Conditions of Classification CONTENTS SECTION 1 Classificati
41、on 9 SECTION 2 Classification Symbols and Notations . 10 1 Unrestricted Service 10 3 Classification Designations . 10 3.1 Barge . 10 5 Notations . 10 5.1 Oil Tank Barge . 10 5.3 Fuel Oil Tank Barge . 10 5.5 Chemical Tank Barge 10 5.7 Liquefied Gas Tank Barge . 10 5.9 Tank Barge 10 5.11 Independent T
42、ank Barge . 10 5.13 Pressure Tank Barge . 11 5.15 Fuel Oil or Chemical Tank Barge . 11 5.17 Fuel Oil and Chemical Tank Barge 11 5.19 Oil or Chemical Tank Barge . 11 5.21 Oil and Chemical Tank Barge 11 5.23 ITB Barge 11 5.25 Oil Spill Recovery Barges (OSR-S1, OSR-C1, OSR-S2 or OSR-C2) 11 5.27 Crane C
43、RC Barge 11 5.29 Pipe Laying Barge . 11 5.31 Cable Laying Barge . 11 5.33 Accommodation Barge 11 5.35 Machinery 12 7 Dual and Multi-Purpose Barges 12 SECTION 3 Rules for Classification 13 1 Application . 13 1.1 General 13 1.3 Safety Requirements for Barges with Personnel . 13 3 Interpretation . 13 S
44、ECTION 4 Submission of Plans 14 1 Hull Plans 14 3 Loading Conditions . 15 5 Machinery Plans . 15 8 ABSRULES FOR BUILDING AND CLASSING STEEL BARGES .2018 PART Section 1: Classification 1 CHAPTER 1 Scope and Conditions of Classification SECTION 1 Classification (1 January 2008) The requirements for co
45、nditions of classification are contained in the separate, generic ABS Rules for Conditions of Classification (Part 1). Additional requirements specific to steel barges are contained in the following Sections of this Part. ABSRULES FOR BUILDING AND CLASSING STEEL BARGES .2018 9 PART Section 2: Classi
46、fication Symbols and Notations 1 CHAPTER 1 Scope and Conditions of Classification SECTION 2 Classification Symbols and Notations (1 January 2008) A listing of Classification Symbols and Notations available to the Owners of vessels, offshore drilling and production units and other marine structures a
47、nd systems, “List of ABS Notations and Symbols” is available from the ABS website “http:/www.eagle.org”. The following notations are specific to steel barges. 1 Unrestricted Service Barges which have been built to the satisfaction of the ABS Surveyors to the full requirements of the Rules, or to the
48、ir equivalent, where approved by the Committee for unrestricted ocean service will be classed and distinguished in the Record by the symbols A1 followed by the appropriate designation, such as Oil Tank Barge, Fuel Oil Tank Barge, etc., indicating compliance with the requirements of the Rules. 3 Clas
49、sification Designations (2015) 3.1 Barge For all barges not falling under the categories of 1-1-2/5.1 through 1-1-2/5.33 of this Supplement to the ABS Rules for Conditions of Classification (Part 1), a note will be included in the Record describing the primary function of the barge such as deck cargo barge, bulk cargo barge, etc. Design review and survey are to be carried out in accordance with the applicable Rule requirements for the intended service and primary function of the barge and Classed as such. 5 Notations (2015) 5.1 Oil Tank Barge Barge intended to ca
