1、 Notices and General Information RULES FOR BUILDING AND CLASSING HIGH-SPEED NAVAL CRAFT 2018 NOTICES AND GENERAL INFORMATION American Bureau of Shipping Incorporated by Act of Legislature of the State of New York 1862 2017 American Bureau of Shipping. All rights reserved. ABS Plaza 16855 Northchase
2、Drive Houston, TX 77060 USA Table of Contents part Notices and General Information CONTENTS Introduction . 1 TABLE 1 Applicable Editions of Booklets Comprising 2018 Rules 2 TABLE 2 Division and Numbering of Rules and Guides 2 Rule Change Notice (2018) . 3 TABLE 3 Summary of Changes from the 2017 Rul
3、es 3 ii ABSRULES FOR BUILDING AND CLASSING HIGH-SPEED NAVAL CRAFT .2018 Notices and General Information Introduction 1. The year 2018 edition of the Rules for Building and Classing High-Speed Naval Craft consists of the eight (8) booklets as shown in Table 1. With regard to three booklets, Part 1, P
4、art 2, and Part 7: a) The purpose of the generic title ABS Rules for Conditions of Classification High-Speed Craft (Part 1) is to reflect the expanded contents of PART 1, as a result of including consolidated requirements for “Classification” applicable to all types of and sizes of high-speed craft
5、as specified in the Foreword to Part 1. Additional specific requirements are contained in Chapters 2 and 3 of Part 1. b) The purpose of the generic title ABS Rules for Materials and Welding of PART 2 is to emphasize the common applicability of the requirements to ABS-classed vessels, other marine st
6、ructures and their associated machinery, and thereby make PART 2 more readily a common “PART” of various ABS Rules and Guides, as appropriate. c) The purpose of the generic title ABS Rules for Survey After Construction (Part 7) is to reflect the expanded contents of PART 7, as a result of including
7、consolidated requirements for “Surveys After Construction” applicable to all types and sizes of vessels, barges and specific shipboard arrangements/systems, etc., as specified in Part 7, Chapter 1, Section 1. 2. The numbering system applied in the Rules is shown in Table 2. 3. The primary changes fr
8、om the 2017 Rules are identified and listed in Table 3. The effective date of the indicated Rule Changes is 1 January 2017, unless specifically indicated otherwise. 4. The effective date of each technical change since 1993 is shown in parenthesis at the end of the subsection/paragraph titles within
9、the text of each Part. Unless a particular date and month are shown, the years in parentheses refer to the following effective dates: (2000) and after 1 January 2000 (and subsequent years) (1996) 9 May 1996 (1999) 12 May 1999 (1995) 15 May 1995 (1998) 13 May 1998 (1994) 9 May 1994 (1997) 19 May 1997
10、 (1993) 11 May 1993 5. Until the next edition of the Rules for Building and Classing High-Speed Naval Craft is published, Rule Change Notices and/or Corrigenda, as necessary, will be published on the ABS website www.eagle.org only, and will be available free for downloading. It is not intended to pu
11、blish hard copies of future Rule Change Notices and/or Corrigenda to existing Rules or Guides. The consolidated edition of the Rules for Building and Classing High-Speed Naval Craft, which includes Rule Change Notices and/or Corrigenda using different colors for easy recognition, will be published o
12、n the ABS website only when RCN and/or Corrigenda are issued. 6. The listing of CLASSIFICATION SYMBOLS AND NOTATIONS is available from the ABS website www.eagle.org for download. ABSRULES FOR BUILDING AND CLASSING HIGH-SPEED NAVAL CRAFT .2018 1 Notices and General Information TABLE 1 Applicable Edit
13、ions of Booklets Comprising 2018 Rules Notices and General Information 2018 Part 1: Rules for Conditions of Classification High-Speed Craft 2018* Part 2: Rules for Materials and Welding Rules for Testing and Certification of Materials Rules for Welding and Fabrication 2018* Part 2: Rules for Materia
14、ls and Welding Aluminum and Fiber Reinforced Plastics (FRP) 2018* Part 2: Rule Requirements for Materials and Welding Supplementary Requirements for Naval Vessels 2000* Part 3: Hull Construction and Equipment 2018 Part 4: Craft Systems and Machinery 2018 Part 7: Rules for Survey After Construction 2
15、018* * Note: The latest edition of these Rules is to be referred to. These Rules may be downloaded from the ABS website at www.eagle.org, Rules and Guides, Downloads or may be ordered separately from the ABS Publications online catalog at www.eagle.org, Rules and Guides, Catalog. TABLE 2 Division an
16、d Numbering of Rules and Guides Division Number Part Part 1 Chapter Part 1, Chapter 1 Section Section 1-1-1 Subsection (see Note 1) 1-1-1/1 Paragraph (see Note 1) 1-1-1/1.1 Subparagraph 1-1-1/1.1.1 Item 1-1-1/1.1.1(a) Subitem 1-1-1/1.1.1(a)i) Appendix Appendix 1-1-A1 or Appendix 1-A1-1 Note: 1 An od
17、d number (1, 3, 5, etc.) numbering system is used for the Rules and Guides. The purpose is to permit future insertions of even-numbered paragraphs (2, 4, 6, etc.) of text and to avoid the necessity of having to renumber the existing text and associated cross-references, as applicable, within the Rul
18、es and associated process instructions, check sheets, etc. 2 ABSRULES FOR BUILDING AND CLASSING HIGH-SPEED NAVAL CRAFT .2018 Notices and General Information Rule Change Notice (2018) TABLE 3 Summary of Changes from the 2017 Rules EFFECTIVE DATE 1 March 2017 shown as (1 March 2017) Part/Para. No. Tit
19、le/Subject Status/Remarks PART 1 Rules for Conditions of Classification High-Speed Craft 1-1-1/7 Scope of Classification To align with the other sections of Part 1 regarding disclaimers of liability for the responsibilities of vessel owners/operators in this article. 1-1-6/11 (New) Plan Submittal To
20、 align ABS plan submittal process with our legal duty to protect client and third party intellectual property rights. EFFECTIVE DATE 1 May 2017 shown as (1 May 2017) Part/Para. No. Title/Subject Status/Remarks PART 1 Rules for Conditions of Classification High-Speed Craft 1-1-4/3.1 Effective Date To
21、 remove the application of the six-month rules for Guides, which are meant for immediate implementation. (Incorporates Notice No. 2) EFFECTIVE DATE 1 January 2018 shown as (2018) Part/Para. No. Title/Subject Status/Remarks PART 1 Rules for Conditions of Classification High-Speed Craft 1-1-A2/5.1.5 D
22、uplicate Product Design Assessment To clarify ABS policy for PDA-DUP issuance, confirmed by ABS Programs. EFFECTIVE DATE 1 July 2017 shown as (1 July 2016) (based on the contract date for new construction between builder and Owner) Part/Para. No. Title/Subject Status/Remarks PART 3 Hull Construction
23、 and Equipment 3-2-8/17.1 Strength To reflect current practice for cover plates and address vortex shedding for spade rudders with embedded trunks. (Incorporates Notice No. 1) 3-2-8/Figure 5 (New) To reflect current practice for cover plates and address vortex shedding for spade rudders with embedde
24、d trunks. (Incorporates Notice No. 1) 3-2-8/Figure 6 (New) To reflect current practice for cover plates and address vortex shedding for spade rudders with embedded trunks. (Incorporates Notice No. 1) 3-2-8/Figure 7 (New) To reflect current practice for cover plates and address vortex shedding for sp
25、ade rudders with embedded trunks. (Incorporates Notice No. 1) 3-2-8/17.1.2 In way of Cutouts To reflect current practice for cover plates and address vortex shedding for spade rudders with embedded trunks. (Incorporates Notice No. 1) ABSRULES FOR BUILDING AND CLASSING HIGH-SPEED NAVAL CRAFT .2018 3
26、Notices and General Information Part/Para. No. Title/Subject Status/Remarks PART 4 Craft Systems and Machinery 4-2-1/13.9.2iv) To include the alternative of normal continuous cruise power, in line with IACS UR M51 Rev.4, Feb. 2015. (Incorporates Notice No. 1) 4-2-1/Table 1 Required Material and Nond
27、estructive Tests of Diesel Engine Parts To clarify the scope of hydraulic testing for high pressure fuel injection pipes including common fuel rail and high pressure common servo oil systems, in line with IACS UR M72 rev. 1 Mar. 2016. (Incorporates Notice No. 1) 4-2-1/Table 2 Test Pressures for Part
28、s of Internal-combustion Engines To clarify the scope of hydraulic testing for high pressure fuel injection pipes including common fuel rail and high pressure common servo oil systems, in line with IACS UR M72 rev. 1 Mar. 2016. (Incorporates Notice No. 1) 4-2-2/1.1 Application To clarify the categor
29、ization of turbochargers and the application of Type Approval. (Incorporates Notice No. 1) 4-2-2/1.3.1 Turbocharger To clarify the categorization of turbochargers and the application of Type Approval. (Incorporates Notice No. 1) 4-2-2/1.3.3 (New) Generic Range To clarify the categorization of turboc
30、hargers and the application of Type Approval. (Incorporates Notice No. 1) 4-2-2/1.5.1ii) To clarify the categorization of turbochargers and the application of Type Approval. (Incorporates Notice No. 1) 4-2-2/3.3 Category A and B Turbochargers To clarify the categorization of turbochargers and the ap
31、plication of Type Approval. (Incorporates Notice No. 1) 4-2-2/3.5 Category C Turbochargers To clarify the categorization of turbochargers and the application of Type Approval. (Incorporates Notice No. 1) 4-2-2/3.7.3 Certification Under Quality Assurance Assessment PQA (IACS UR Z26 Alternative Certif
32、ication Scheme) To clarify the categorization of turbochargers and the application of Type Approval. (Incorporates Notice No. 1) 4-2-2/5.1 General To clarify the categorization of turbochargers and the application of Type Approval. (Incorporates Notice No. 1) 4-2-2/5.3 Containment To clarify the cat
33、egorization of turbochargers and the application of Type Approval. (Incorporates Notice No. 1) 4-2-2/5.7 Type Testing (applicable to category B and C turbochargers) To clarify the categorization of turbochargers and the application of Type Approval. (Incorporates Notice No. 1) 4-2-2/7 Piping Systems
34、 for Turbochargers To clarify the categorization of turbochargers and the application of Type Approval. (Incorporates Notice No. 1) 4-2-2/8 (New) Alarms and Monitoring To clarify the categorization of turbochargers and the application of Type Approval. (Incorporates Notice No. 1) 4-2-2/11.1 Shop Ins
35、pection and Tests To clarify the categorization of turbochargers and the application of Type Approval. (Incorporates Notice No. 1) 4-2-2/11.1.1 Material Tests To clarify the categorization of turbochargers and the application of Type Approval. (Incorporates Notice No. 1) 4-2-2/11.1.5 Shop Trial To c
36、larify the categorization of turbochargers and the application of Type Approval. (Incorporates Notice No. 1) 4-2-2/11.3 Certification of Turbochargers To clarify the categorization of turbochargers and the application of Type Approval. (Incorporates Notice No. 1) 4-3-4/13.1.9 (New) System Response U
37、nder Failure To detect failure in the steering gear control system and provide the operator with sufficient information to decide what action is required for the different failure scenarios, in line with IACS UR E25 June 2016. (Incorporates Notice No. 1) 4-3-4/Table 1 Steering Gear Instrumentation T
38、o detect failure in the steering gear control system and provide the operator with sufficient information to decide what action is required for the different failure scenarios and to require a deviation alarm in addition to basic failure detection, in line with IACS UR E25 June 2016. (Incorporates N
39、otice No. 1) 4 ABSRULES FOR BUILDING AND CLASSING HIGH-SPEED NAVAL CRAFT .2018 Notices and General Information Part/Para. No. Title/Subject Status/Remarks 4-3-5/1.1 Application To clarify the various terms used for steering systems and their associated equipment, in line with IACS UI SC242 Rev.1, Ap
40、r. 2016. (Incorporates Notice No. 1) 4-3-5/1.5.6 (New) Steering System To clarify the various terms used for steering systems and their associated equipment, in line with IACS UI SC242 Rev.1, Apr. 2016. (Incorporates Notice No. 1) 4-3-5/5.12.2(b)iii) To clarify that the capacity requirements apply r
41、egardless whether he steering systems are arranged with common or dedicated power units that the requirements of 4-3-4/11.1 apply to each steering system in ships fitted with multiple steering systems, in line with IACS UI SC242 Rev.1, Apr. 2016. (Incorporates Notice No. 1) 4-3-5/5.12.4 (New) Electr
42、ic and Electrohydraulic Steering Systems To clarify that the capacity requirements apply regardless whether he steering systems are arranged with common or dedicated power units that the requirements of 4-3-4/11.1 apply to each steering system in ships fitted with multiple steering systems, in line
43、with IACS UI SC242 Rev.1, Apr. 2016. (Incorporates Notice No. 1) 4-3-5/7.5 (New) Failure Detection and Response To detect failure in the steering gear control system and provide the operator with sufficient information to decide what action is required for the different failure scenarios, in line wi
44、th IACS UR E25 June 2016. (Incorporates Notice No. 1) 4-6-2/5.7.3(c) Fire Resistance To clarify the cases in which flexible hoses need not be of fire-resistant type. (Incorporates Notice No. 1) 4-6-2/5.9.1(c) (Deleted) Operational Conditions To minimize the use of slip-on joints for pipe connection
45、except for cases where compensation of axial pipe deformation is necessary and to clarify the requirements, in line with IACS UR P2 Rev.2, Mar. 2016. (Incorporates Notice No. 1) 4-6-2/5.9.1(e) Fire Testing To clarify the requirements, in line with IACS UR P2 Rev.2, Mar. 2016. (Incorporates Notice No
46、. 1) 4-6-2/5.9.1(f) Locations To clarify the requirements, in line with IACS UR P2 Rev.2, Mar. 2016. (Incorporates Notice No. 1) 4-6-2/5.9.1(h) (Deleted) Application To clarify the requirements, in line with IACS UR P2 Rev.2, Mar. 2016. (Incorporates Notice No. 1) 4-6-2/5.9.1(g) Joints To clarify th
47、e requirements, in line with IACS UR P2 Rev.2, Mar. 2016. (Incorporates Notice No. 1) 4-6-2/5.9.1(i) Slip-on Joints To minimize the use of slip-on joints for pipe connection except for cases where compensation of axial pipe deformation is necessary and to clarify the requirements, in line with IACS
48、UR P2 Rev.2, Mar. 2016. (Incorporates Notice No. 1) 4-6-2/5.9.1(j) Application To clarify the requirements, in line with IACS UR P2 Rev.2, Mar. 2016. (Incorporates Notice No. 1) 4-6-2/5.9.2(e)ii) Selection of Test Specimen To clarify the requirements, in line with IACS UR P2 Rev.2, Mar. 2016. (Incor
49、porates Notice No. 1) 4-6-2/5.9.2(e)v) 1(a) To clarify the requirements, in line with IACS UR P2 Rev.2, Mar. 2016. (Incorporates Notice No. 1) 4-6-2/5.9.2(e)v)2 Vibration (Fatigue) Test To clarify the requirements, in line with IACS UR P2 Rev.2, Mar. 2016. (Incorporates Notice No. 1) 4-6-2/5.9.2(e)v)4 Burst Pressure Test To clarify the requirements, in line with IACS UR P2 Rev.2, Mar. 2016. (Incorporates Notice No. 1) 4-6-2/5.9.2(e)v)5 Pull-out Test To clarify the requirements, in line with IACS UR P2 Rev.2, Mar. 2016. (Incorporates Notice No. 1) 4-6-2/5.9.2(e)v)6 F
