1、 ASD STANDARD NORME ASD ASD NORM prEN 2345-2 Edition P 2 April 2009 PUBLISHED BY THE AEROSPACE AND DEFENCE INDUSTRIES ASSOCIATION OF EUROPE - STANDARDIZATIONAvenue de Tervuren, 270 - B-1150 Brussels - Tel. + 32 2 775 8126 - Fax. + 32 2 775 8131 - www.asd-stan.orgICS: Descriptors: ENGLISH VERSION Aer
2、ospace series Rivets, solid, in aluminium or aluminium alloy, metric series Technical specification Srie arospatiale Rivets ordinaires, en aluminium ou en alliage daluminium, srie mtrique Spcification technique Luft- und Raumfahrt Vollniete, aus Aluminium oder Aluminiumlegierung, Metrische Reihe Tec
3、hnische Lieferbedingungen This “Aerospace Series“ Prestandard has been drawn up under the responsibility of ASD-STAN (The AeroSpace and Defence Industries Association of Europe - Standardization). It is published for the needs of the European Aerospace Industry. It has been technically approved by t
4、he experts of the concerned Domain following member comments. Subsequent to the publication of this Prestandard, the technical content shall not be changed to an extent that interchangeability is affected, physically or functionally, without re-identification of the standard. After examination and r
5、eview by users and formal agreement of ASD-STAN, it will be submitted as a draft European Standard (prEN) to CEN (European Committee for Standardization) for formal vote and transformation to full European Standard (EN). The CEN national members have then to implement the EN at national level by giv
6、ing the EN the status of a national standard and by withdrawing any national standards conflicting with the EN. Edition approved for publication 30 April 2009 Comments should be sent within six months after the date of publication to ASD-STAN Mechanical Domain Copyright 2009 by ASD-STAN Copyright ASD-STAN Provided by IHS under license with AECMA Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-
