1、AECMA STANDARD NORME AECMA AECMA NORM prEN 3372-005 Edition P 1 June 2005 PUBLISHED BY THE EUROPEAN ASSOCIATION OF AEROSPACE INDUSTRIES - STANDARDIZATION Gulledelle 94 - B-1200 Brussels - Tel. + 32 2 775 8110 - Fax. + 32 2 775 8111 - www.aecma-stan.orgICS: 49.060 Descriptors: ENGLISH VERSION Aerospa
2、ce series Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures 65 C to 175 C or 200 C continuous Part 005: Receptacle, hermetic, round flange, solder mounting Product standard Srie arospatiale Connecteurs lectriques circulaires
3、scoop-proof accouplement par baonnettes temprature dutilisation 65 C 175 C ou 200 C continu Partie 005: Embase hermtique collerette ronde fixe par soudure Norme de produit Luft- und Raumfahrt Elektrische Rundsteckverbinder, kontaktgeschtzt, Bajonettkupplung, Betriebstemperatur 65 C bis 175 C oder 20
4、0 C konstant Teil 005: Hermetischer fester Steckverbinder mit rundem Schwei- oder Ltflansch Produktnorm This “Aerospace Series“ Prestandard has been drawn up under the responsibility of AECMA-STAN (The European Association of Aerospace Industries - Standardization). It is published for the needs of
5、the European Aerospace Industry. It has been technically approved by the experts of the concerned Domain following member comments. Subsequent to the publication of this Prestandard, the technical content shall not be changed to an extent that interchangeability is affected, physically or functional
6、ly, without re-identification of the standard. After examination and review by users and formal agreement of AECMA-STAN, it will be submitted as a draft European Standard (prEN) to CEN (European Committee for Standardization) for formal vote and transformation to full European Standard (EN). The CEN
7、 national members have then to implement the EN at national level by giving the EN the status of a national standard and by withdrawing any national standards conflicting with the EN. Edition approved for publication 30 June 2005 Comments should be sent within six months after the date of publicatio
8、n to AECMA-STAN Electrical Domain Copyright 2005 by AECMA-STAN Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-prEN 3372-005:2005Foreword This standard
9、 was reviewed by the Domain Technical Coordinator of AECMA-STANs Non-metallic Material Domain. After inquiries and votes carried out in accordance with the rules of AECMA-STAN defined in AECMA-STANs General Process Manual, this standard has received approval for Publication. Contents Page 1 Scope 3
10、2 Normative references 3 3 Terms and definitions .3 4 Required characteristics.4 4.1 Dimensions, mass .4 4.2 Panel cut-out and mounting of connectors 5 4.3 Material, surface treatment.6 4.4 Main general characteristics 6 4.5 Possible combinations of plugs and receptacles 6 5 Designation 6 6 Marking
11、.6 7 Technical specification .6 2 Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-prEN 3372-005:20051 Scope This standard specifies the characteristics
12、 of hermetic receptacles with round flange attached by soldering in the family of circular electrical connectors coupled by bayonet ring. It applies to class defined in Table 3. For plugs and protective covers, see EN 3372-008 and EN 3372-006 respectively. 2 Normative references The following refere
13、nced documents are indispensable for the application of this document. For dated refer-ences, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 3372-001, Aerospace series Connectors, electrical, circular, medi
14、um and high contact density, scoop-proof with bayonet coupling, operating temperatures 65 C to 175 C or 200 C continuous Part 001: Technical specification1)EN 3372-002, Aerospace series Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating te
15、mperatures 65 C to 175 C or 200 C continuous Part 002: Specification of performance and contact arrangements1)EN 3372-006, Aerospace series Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures 65 C to 175 C or 200 C continuous P
16、art 006: Protective cover for receptacle Product standard1)EN 3372-008, Aerospace series Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures 65 C to 175 C or 200 C continuous Part 009: Free plug with grounding ring Product stan
17、dard1)3 Terms and definitions According to EN 3372-001. 1) Published as AECMA Prestandard at the date of publication of this standard 3 Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permit
18、ted without license from IHS-,-,-prEN 3372-005:20054 Required characteristics 4.1 Dimensions, mass See Figure 1 and Table 1. Dimensions and tolerances in millimetres; they apply after surface treatment Figure 1 Receptacle Table 1 Dimensions and mass d7d8l5l6Mass mm mm mm mm g Housing size 28,025,0+0
19、3,013,0+28,025,0+03,013,0+max. 08 17,45 14,27 10,0 10 20,24 17,07 12,0 12 23,01 19,84 18,0 14 26,19 23,01 21,0 16 29,36 26,19 25,0 18 32,54 29,36 33,0 20 34,93 31,75 20,04 3,17 39,0 22 38,10 34,93 45,0 24 41,28 38,10 20,85 3,96 57,0 4 Copyright Association Europeene des Constructeurs de Materiel Aer
20、ospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-prEN 3372-005:20054.2 Panel cut-out and mounting of connectors See Figure 2 and Table 2 for panel cut-out for mounting of connectors. Dimensions and tolerances in milli
21、metres aD min value is calculated as follows: D connector one + D connector two (see Table 2 for value D). Figure 2 Panel cut-out Table 2 Panel cut-out dimensions Dimensions in millimetres A D Housing size 0,1 min. 08 14,8 28,0 10 17,5 31,012 20,2 36,0 14 23,4 41,016 26,6 43,0 18 29,8 46,020 32,3 53
22、,0 22 35,3 58,024 38,6 61,0 5 Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-prEN 3372-005:20056 4.3 Material, surface treatment See Table 3. 4.4 Main
23、 general characteristics According to EN 3372-002. 4.5 Possible combinations of plugs and receptacles According to EN 3372-002. 5 Designation EXAMPLE Description block Identity block ELECTRICAL CONNECTOR, RECEPTACLE EN 3372 Y 1 18N35 M N Number of basic standard Class (see Table 3) Round flange sold
24、er mounted receptacle (see EN 3372-002) Housing size and contact arrangement (see EN 3372-002) Type of contact M Male Polarisation (see EN 3372-002) NOTE If necessary, the code I9005 shall be placed between the description block and the identity block. Table 3 Connector class Class Description Y Her
25、metic receptacle, passivated stainless steel, solder contact, 48 h salt mist, maximum operating temperature 200 C continuous 6 Marking Unless there are other specific contractual requirements, the marking shall include: the identity block as defined in Clause 5; the date of manufacture (year, week); the manufacturers name or trade mark. 7 Technical specification According to EN 3372-001. Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
