1、AECMA STANDARD NORME AECMA AECMA NORM prEN 3733-008 Edition P 1 May 2005 PUBLISHED BY THE EUROPEAN ASSOCIATION OF AEROSPACE INDUSTRIES - STANDARDIZATION Gulledelle 94 - B-1200 Brussels - Tel. + 32 2 775 8110 - Fax. + 32 2 775 8111 - www.aecma-stan.orgICS: 49.060 Descriptors: ENGLISH VERSION Aerospac
2、e series Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 C continuous Part 008: Plug sub-assembly for cable to EN 4532 (200 m/280 m fibre) Product standard Srie arospatiale Connecteur optique circulaire monovoie, accouplement par bague file
3、te, temprature dutilisation 150 C continu Partie 008 : Sous-ensemble fiche pour cble EN 4532 (fibre 200 m/280 m) Norme de produit Luft- und Raumfahrt Optischer Rundsteckverbinder einpolig Schraubkupplung, Betriebstemperatur 150 C konstant Teil 008: Steckerunterbaugruppe fr Kabel nach EN 4532 (200 m/
4、280 m fiber) Produktnorm This “Aerospace Series“ Prestandard has been drawn up under the responsibility of AECMA-STAN (The European Association of Aerospace Industries - Standardization). It is published for the needs of the European Aerospace Industry. It has been technically approved by the expert
5、s of the concerned Domain following member comments. Subsequent to the publication of this Prestandard, the technical content shall not be changed to an extent that interchangeability is affected, physically or functionally, without re-identification of the standard. After examination and review by
6、users and formal agreement of AECMA-STAN, it will be submitted as a draft European Standard (prEN) to CEN (European Committee for Standardization) for formal vote and transformation to full European Standard (EN). The CEN national members have then to implement the EN at national level by giving the
7、 EN the status of a national standard and by withdrawing any national standards conflicting with the EN. Edition approved for publication 31 May 2005 Comments should be sent within six months after the date of publication to AECMA-STAN Electrical Domain Copyright 2005 by AECMA-STAN Copyright Associa
8、tion Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-prEN 3733-008:20052 Foreword This standard was reviewed by the Domain Technical Coordinator of AECMA-STANs Electrical Do
9、main. After inquiries and votes carried out in accordance with the rules of AECMA-STAN defined in AECMA-STANs General Process Manual, this standard has received approval for Publication. Contents Page 1 Scope . 3 2 Normative references 3 3 Terms and definitions . 3 4 Required characteristics 3 5 Des
10、ignation. 4 6 Marking 4 7 Technical specification 4 Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-prEN 3733-008:20053 1 Scope This standard specifies
11、 the characteristics of plug sub-assemblies for single channel fibre optic plug connectors for aerospace series single core optical cable in accordance with EN 4532, operating temperature up to 150 C. Connector interface dimensions, table of tests and qualification approval requirements, are contain
12、ed in the Technical Specification EN 3733-001. EN 3733-002, List of product standards, includes the listings of product types, codification and applicable combinations of product types. 2 Normative references The following referenced documents are indispensable for the application of this document.
13、For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2591-100, Aerospace series Elements of electrical and optical connection Test methods Part 100: General.1)EN 3733-001, Aerospace series C
14、onnector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 C continuous Part 001: Technical specification. 1)EN 3733-002, Aerospace series Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 C con
15、tinuous Part 002: List of products standards.1)EN 3733-003, Aerospace series Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 C continuous Part 003: Plug connector for cable to EN 4532 Product standard.1)EN 4532, Aerospace series Cables, opt
16、ical, single core 200 m/280 m fibre, 2,5 mm outer jacket Technical specification. 1)3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 2591-100 apply. 4 Required characteristics 4.1 Dimensions and mass Dimensions (in millimetres) shall be as shown in Fig
17、ure 1. 1) Published as AECMA Prestandard at the date of publication of this standard. Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-prEN 3733-008:200
18、54 Figure 1 NOTE Terminated overall length (when assembled within a plug connector) assumes a maximum gap of 1 mm between crimp sleeve and rear nut. Mass: 6,2 g max. 4.2 Materials Zirconia ceramic, nickel-copper alloy metallic components. 4.3 Applicable combinations This component is supplied as an
19、integral part of products conforming to Product Standard EN 3733-003 and is a deliverable spare part. 5 Designation EXAMPLE Description block SUB-ASSEMBLY, PLUG Identity block EN3733-008B Number of the basic standard Product standard (see EN 3733-002) Class (see EN 3733-001, Test fluids Class B) NOT
20、E If necessary, the code I9005 may be placed between the description block and the identity block. 6 Marking Not applicable. 7 Technical specification This component is qualified as part of a complete plug connector assembly when tested to the qualification requirements of EN 3733-001 and EN 3733-003. Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
