1、AECMA STANDARD NORME AECMA AECMA NORM Edition approved for publication 28 February 2003 prEN 41 65-01 3 Edition P 1 February 2003 Comments should be sent within six months after the date of publication to Electrical Domain AECMA-STAN ICs: 49.060 Descriptors: ENGLISH VERSION Aerospace series Connecto
2、rs, electrical, rectangular, modular Operating temperature 175 OC continuous Part 013: Cable clamp 2 and 4 modules for connectors, series 2 and series 3 Product standard Srie arospatiale Connecteurs lectriques rectangulaires modulaires Temprature dutilisation 175 OC continu Partie O1 3 : Serre-cbles
3、 2 et 4 modules pour connecteurs, srie 2 et srie 3 Norme de produit Luft- und Raumfahrt Elektrischer Rechtecksteckverbinder in modularer Bauweise Betriebstemperatur 175 OC konstant Teil 013: Gehuse fr Zugentlastung fr Steckverbinder mit 2 und 4 Modulen, Serie 2 und Serie 3 Produktnorm This “Aerospac
4、e Series“ Prestandard has been drawn up under the responsibility of AECMA-STAN (The European Association of Aerospace Industries - Standardization). It is published on green paper for the needs of the European Aerospace Industry. It has been technically approved by the experts of the concerned Domai
5、n following member comments. Subsequent to the publication of this Prestandard, the technical content shall not be changed to an extent that interchangeability is affected, physically or functionally, without re-identification of the standard. After examination and review by users and formal agreeme
6、nt of AECMA-STAN it will be submitted as a draft European Standard to CEN (European Committee for Standardization) for formal vote. I I Copyright 2003 O by AECMA-STA1 Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo re
7、production or networking permitted without license from IHS-,-,-Page 2 prEN 4165-013: 2003 Foreword This standard was reviewed by the Domain Technical Coordinator of AECMA-STANS Electrical Domain. After inquiries and votes carried out in accordance with the rules of AECMA-STAN defined in AECMA- STAN
8、S General Process Manual, this standard has received approval for Publication. Contents Page Scope Normative references . Terminology Required characteristics Cable clamp Designation . Marking . Technical specification Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provide
9、d by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Page 3 prEN 41 65-01 3: 2003 1 Scope This standard defines cable clamp 2 and 4 modules for connectors, series 2 and series 3 used in the family of rectangular electrical connectors. 2
10、Normative references This European Standard incorporates by dated or undated reference provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions
11、 of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to apply. EN 2424, EN 41 65-001, EN 41 65-002, Aerospace series - Marking of aerospace products Aerospace series
12、- Connectors, electrical, rectangular, modular - Operating temperature I75 “C continuous - Part 001: Technical specification - Product standard 1 ) Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature I75 “C continuous - Part 002: Specification of performance and c
13、ontact arrangements 1) 3 Term in ol ogy See EN 4165-001. 4 Required characteristics Dimensions are in millimetres. 1) Published as AECMA standard at the date of publication of this standard Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with A
14、ECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Page 4 prEN 4165-013: 2003 5 Cable clamp 5.1 See Figure 1. For 2 modules classes W, F and A Key 1 see Figure 3. Figure 1 5.2 See Figure 2. For 4 modules classes W, F and A Key 1 see Figure 3. Figure 2 Copyright As
15、sociation Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Page 5 prEN 41 65-01 3: 2003 Class 5.3 See Figure 3. Intermateability for series 2 and series 3 Description Cable c
16、lamp with housing (shell) olive drab cadmium plated, aluminium alloy, conducting finish, 500 hours resistance to salt mist, maximum operating temperature 175 “C continuous Key 1 4 modules - 70,9 rnax. 2 modules - 40,4 rnax. Figure 3 Cable clamp with housing (shell) black nickel plated, aluminium all
17、oy, 96 hours resistance to IFl salt mist, maximum operating temperature 175 “C continuous Cable clamp with housing (shell) black anodised plated, aluminium alloy, no conducting IAl finish, 48 hours resistance to salt mist, maximum operating temperature 175 “C continuous 6 Designation EXAMPLE: Descri
18、ption block Identity block ELECTRICAL CONNECTOR CABLE CLAMP EN41 65F13A4 Number of the basic standard Class type (see Table 1) Type 13: Cable clamp (see EN 4165-002) Shell type 4 = plug 4 modules 2 = plug 2 modules Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by
19、 IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Page 6 prEN 4165-013: 2003 7 Marking Unless there are other specific contractual requirements, the marking shall be in accordance with EN 2424, category P. 8 See EN 4165-001. Tech n i cal specification Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
