1、AECMA STANDARD NORME AECMA AECMA NORM Edition approved for publication 28 February 2003 prEN 41 65-020 Edition P 1 February 2003 Comments should be sent within six months after the date of publication to Electrical Domain AECMA-STAN ICs: 49.060 Descriptors: ENGLISH VERSION Aerospace series Connector
2、s, electrical, rectangular, modular Operating temperature 175 OC continuous Part 020: Coupling system keyway for receptacle Product standard Srie arospatiale Connecteurs lectriques rectangulaires modulaires Temprature dutilisation 175 OC continu Partie 020 : Systme de dtrompage pour embases Norme de
3、 produit Luft- und Raumfahrt Elektrischer Rechtecksteckverbinder in modularer Bauweise Betriebstemperatur 175 OC konstant Teil 020: Kodierungssystem fr feste Steckeverbinder Produktnorm This “Aerospace Series“ Prestandard has been drawn up under the responsibility of AECMA-STAN (The European Associa
4、tion of Aerospace Industries - Standardization). It is published on green paper for the needs of the European Aerospace Industry. It has been technically approved by the experts of the concerned Domain following member comments. Subsequent to the publication of this Prestandard, the technical conten
5、t shall not be changed to an extent that interchangeability is affected, physically or functionally, without re-identification of the standard. After examination and review by users and formal agreement of AECMA-STAN it will be submitted as a draft European Standard to CEN (European Committee for St
6、andardization) for formal vote. Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Page 2 prEN 4165-020: 2003 Foreword This standard was reviewed by the D
7、omain Technical Coordinator of AECMA-STANS Electrical Domain. After inquiries and votes carried out in accordance with the rules of AECMA-STAN defined in AECMA- STANS General Process Manual, this standard has received approval for Publication. Contents Page 1 Scope 3 2 Normative references . 3 3 Ter
8、minology 3 4 Required characteristics 4 5 Designation . 5 6 Technical specification 5 Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Page 3 prEN 4165-
9、020: 2003 1 Scope This standard defines the coupling system keyway for receptacle used in the family of rectangular connector. The connector receptacle corresponding to those coupling systems are defined in EN 4165-004, EN 4165-005, EN 4165-011 and EN 4165-012. 2 Normative references This European S
10、tandard incorporates by dated or undated reference provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply
11、to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to apply. EN 2424, EN 4165-001, EN 4165-004, EN 4165-005, EN 4165-01 1, EN 4165-012, Aerospace series - Marking of aerospace products Aerospace serie
12、s - Connectors, electrical, rectangular, modular - Operating temperature I75 “C continuous - Part 001: Technical specification - Product standard 1) Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature I75 “C continuous - Part 004: Stackable mounting receptacle 2 a
13、nd 4 modules, series 2 1 ) Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature I75 “C continuous - Part 005: Stackable mounting receptacle 2 and 4 modules, series 3 1 ) Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 “C
14、continuous - Part O1 I: Flange mounting receptacle 2 and 4 modules, series 2 - Product standard 1 ) Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 “C continuous - Part 012: Flange mounting receptacle 2 and 4 modules, series 3 - Product standard 1 ) 3 Term
15、 in ol ogy See EN 4165-001. 1) Published as AECMA standard at the date of publication of this standard Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
16、Page 4 prEN 4165-020: 2003 4 Required characteristics Dimensions are in millimetres. See Figure 1 and Figure 2 Key 1 optional design for sealing nut Figure 1 Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproductio
17、n or networking permitted without license from IHS-,-,-Page 5 prEN 4165-020: 2003 Description block COUPLING SYSTEM KEYWAY FOR RECEPTACLE Standard nut Purple nut Identity block E N4165RO 1 1101 1011 Number of the basic standard 1- Yellow nut 1021 Green nut 1031 Blue nut 1041 Orange nut 1051 NOTE Col
18、ored paint is visible only on the top face. Figure 2 5 Designation EXAMPLE: White nut 1061 6 Technical specification See EN 4165-001. Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
