1、AECMA STANDARD NORME AECMA AECMA NORM Edition approved for publication 28 February 2005 prEN 4530-002 Edition P 1 February 2005 Comments should be sent within six months after the date of publication to AECMA-STAN ICs: 49.060 Descriptors: ENGLISH VERSION Aerospace series Sealing sleeves used in elem
2、ents of connection Part 002: List and utilization of sealing sleeves Srie arospatiale Manchons dtanchit utiliss dans les organes de connexion Partie 002: Liste et utilisation des manchons dtanchit Luft- und Raumfahrt Dichtungshlse zur Verwendung in Ver bi nd u ng se lem en te n Teil 002: Liste und V
3、erwendung der Dichtungshlse This Xerospace Series“ Prestandard has been drawn up under the responsibility of AECMA-STAN (The European Association of Aerospace Industries - Standardization). It is published for the needs of the European Aerospace Industry. It has been technically approved by the expe
4、rts of the concerned Domain following member comments. Subsequent to the publication of this Prestandard, the technical content shall not be changed to an extent that interchangeability is affected, physically or functionally, without re-identification of the standard. After examination and review b
5、y users and formal agreement of AECMA-STAN, it will be submitted as a draft European Standard (prEN) to CEN (European Committee for Standardization) for formal vote and transformation to full European Standard (EN). The CEN national members have then to implement the EN at national level by giving t
6、he EN the status of a national standard and by withdrawing any national standards conflicting with the EN. Electrical Domain I I Copyright 2005 O by AECMA-STA/ Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduct
7、ion or networking permitted without license from IHS-,-,-Page 2 prEN 4530-002:2005 Foreword This standard was reviewed by the Domain Technical Coordinator of AECMA-STANS Electrical Domain. After inquiries and votes carried out in accordance with the rules of AECMA-STAN defined in AECMA-STANS General
8、 Process Manual, this standard has received approval for Publication. Contents Page 1 Scope 3 2 Normative referen ces 3 3 List and utilization of sealing sleeves 3 Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo repro
9、duction or networking permitted without license from IHS-,-,-Page 3 prEN 4530-002:2005 1 Scope This standard provides a list of removable sealing sleeves as defined in the product standards for use in connectors or other electrical elements of connection. 2 Normative references The following referen
10、ced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 31 55*, Aerospace series - Electrical contacts used in elements of
11、connection. EN 3372-002, Aerospace series - Connectors, electrical, circular, medium and high density, scoop-proof with bayonet coupling, operating temperatures - 65C to 175C or 200C continuous - Part 002: Specification of performance and contact arrangements. ) EN 3645-002, Aerospace series - Conne
12、ctors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 “C or 200 “C continuous - Part 002: Specification of performance and contact arrangements. 2) EN 3682-002, Aerospace series - Connectors, plug and receptable, electrical, rectangular, interchangeable
13、insert type, rack to panel, operating temperature 150 “C continuous - Part 002: Specification of performance and contact arrangements. 2, EN 41 65-002, Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 “C continuous - Part 002: Specification of performance a
14、nd contact arrangements. 2, EN 4530-003, Aerospace series - Sealing sleeves used in elements of connection - Part 003: Product standard. EN 4530-004, Aerospace series - Sealing sleeves used in elements of connection - Part 004: Product standard. EN 4530-005, Aerospace series.- Sealing sleeves used i
15、n elements of connection - Part 005: Sealing sleeves - for external diameter cable 3 mm to 4,1 mm - Product standard. EN 4530-006, Aerospace series - Sealing sleeves used in elements of connection - Part 006: Sealing sleeves - for external diameter cable 4,68 mm to 5,05 mm - Product standard1) EN 45
16、30-007, Aerospace series - Sealing sleeves used in elements of connection - Part 007: Product standard. 3 List and utilization of sealing sleeves See Table I. * 1) 2) All parts quoted in Table 1. In preparation at the date of publication of this standard. Published as AECMA Prestandard at the date o
17、f publication of this standard. Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Page 4 prEN 4530-002:2005 Designation EN 4530- 003 004 005 006 007 Tabl
18、e 1 Range Contacts Elements of connection temperature “C EN 3155- EN 3372-002 EN 3645-002 EN 3682-002 EN 4165-002 X 012 X X 013 X X X X X 065 066 X X X O 34 035 X X - 65 to 150 - - 032 033 X X 024 X X 025 X X X - - 65 to 150 - - - 65 to 200 - - 65 to 150 - - - - - 65 to 150 Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
