1、 2007 Standard for Performance Rating of Commercial and Industrial Unitary Air-Conditioning and Heat Pump Equipment Approved by ANSI on 27 October 2011 ANSI/AHRI Standard 340/360-2007 with Addenda 1 and 2 (Formerly ARI Standard 340/360-2007) ANSI/AHRI STANDARD 340/360-2007 WITH ADDENDUM 2, Performan
2、ce Rating of Commercial and Industrial Unitary Air-Conditioning and Heat Pump Equipment June 2011 Addendum 2 (dated June 2011) of ANSI/AHRI Standard 340/360-2007, “Changes to ANSI/AHRI Standard 340/360-2007” is provided as follows. The particular additions are shown with shading and deletions shown
3、with strikethroughs. The following changes have been incorporated (additions are shown by shading and deletions are shown by strikethroughs) into the already published 2007 version of ANSI/AHRI Standard 340/360 to avoid confusion. 1. The language in Section 6.2.2 associated with units using discrete
4、 step fan control and variable air volume units has been revised. An external static equation has been added to the footnotes of Table 6. External Static The following equation has been added to the footnote of Table 6 of ANSI/AHRI Standard 340/360-2007: 2=MFullLoadCFMPartLoadCFicternalStatFullLoadE
5、xaticExternalSt ANSI/AHRI STANDARD 340/360-2007 WITH ADDENDUM 1, Performance Rating of Commercial and Industrial Unitary Air-Conditioning and Heat Pump Equipment December 2010 Addendum 1 (dated December 2010) of ANSI/AHRI Standard 340/360-2007, “Changes to ANSI/AHRI Standard 340/360-2007” is provide
6、d as follows. The particular additions are shown with shading and deletions shown with strikethroughs. The following changes have been incorporated (additions are shown by shading and deletions are shown by strikethroughs) into the already published 2007 version of ANSI/AHRI Standard 340/360 to avoi
7、d confusion. 1. The certification program scope, on the inside front cover, has been revised. 2. New provisions have been added to the footnotes of Tables 5 and 6 to specify the tolerances associated with external static pressure for all units, and the leaving air dry-bulb temperature on variable ai
8、r volume (VAV) units, respectively. Tolerances The following tolerance has been added to the footnote of Table 5 of ANSI/AHRI Standard 340/360-2007: The tolerance for external static pressure (averaged during the run time) for all equipment is -0 in H2O 0 Pa, +0.05 in H2O 12.5 Pa. The following tole
9、rance has been added to the footnote of Table 6 of ANSI/AHRI Standard 340/360-2007: The tolerance for the leaving air dry-bulb temperature on VAV units is 0.3 F 0.2 C. IMPORTANT SAFETY DISCLAIMER AHRI does not set safety standards and does not certify or guarantee the safety of any products, compone
10、nts or systems designed, tested, rated, installed or operated in accordance with this standard/guideline. It is strongly recommended that products be designed, constructed, assembled, installed and operated in accordance with nationally recognized safety standards and code requirements appropriate f
11、or products covered by this standard/guideline. AHRI uses its best efforts to develop standards/guidelines employing state-of-the-art and accepted industry practices. AHRI does not certify or guarantee that any test conducted under its standards/guidelines will be non-hazardous or free from risk. AP
12、PLICABILITY Integrated Energy Efficiency Ratio (IEER) is effective beginning January 1, 2010. Integrated Part-Load Value (IPLV) is was in effect until January 1, 2010 December 31, 2009. On January 1, 2010, IEER will supersede IPLV. IEER superseded IPLV on January 1, 2010. AHRI CERTIFICATION PROGRAM
13、PROVISIONS Scope of the Certification Program The Certification Program includes: all air-cooled, water-cooled and evaporatively-cooled unitary air-conditioning, air-source unitary heat pump equipment, and air-conditioning condensing units rated at or above 65,000 Btu/h 19,000 W at AHRI Standard Rat
14、ing Conditions (Cooling) but below 250,000 Btu/h 73,200 W at AHRI Standard Rating Conditions (Cooling). all air-cooled packaged unitary air-conditioners from 250,000 Btu/h to less than 760,000 Btu/h at AHRI Standard Rating Conditions (Cooling). Certified Ratings The following Certification Program r
15、atings are verified by test: Unitary Air-Conditioners and Air-Conditioning Condensing Units Air-cooled, water-cooled and evaporatively-cooled from 65,000 Btu/h 19,000 W to below 250,000 Btu/h 73,200 W. 1. AHRI Standard Rating Cooling Capacity, Btu/h 2. Energy Efficiency Ratio, EER, Btu/Wh 3. Integra
16、ted Energy Efficiency Ratio, (IEER) (effective January 1, 2010) or Integrated Part-Load Value, (IPLV) (effective through December 31, 2009) Air-Source Unitary Heat Pump Equipment Air-cooled from 65,000 Btu/h 19,000 W to below 250,000 Btu/h 73,200 W. 1. AHRI Standard Rating Cooling Capacity, Btu/h 2.
17、 Energy Efficiency Ratio, EER, Btu/Wh 3. High Temperature Heating Standard Rating Capacity, Btu/h 4. High Temperature Coefficient of Performance (COP 47F) 5. Low Temperature Heating Standard Rating Capacity, Btu/h 6. Low Temperature Coefficient of Performance (COP 17F) 7. Integrated Energy Efficienc
18、y Ratio, (IEER) (effective January 1, 2010) or Integrated Part-Load Value, (IPLV) (effective through December 31, 2009) Price $10.00 (M) $20.00 (NM) Copyright 2007, by Air-Conditioning, Heating, and Refrigeration Institute Printed in U.S.A. Registered United States Patent and Trademark Office Unitar
19、y Air-Cooled Packaged Air-Conditioners from 250,000 Btu/h 73,200 W to below 760,000 Btu/h 220,000 W. 1. AHRI Standard Rating Cooling Capacity, Btu/h 2. Energy Efficiency Ratio, EER, Btu/Wh 3. Integrated Part-Load Value, IPLV (effective through 31 December, 2009) or Integrated Energy Efficiency Ratio
20、, (IEER) (effective 1 January, 2010) Conformance to the requirements of the Maximum Operating Condition Test, Cooling Low Temperature Operation Test, Insulation Efficiency Test (Cooling), and Condensate Disposal Test (Cooling) are also verified by test. Note: This standard supersedes ARI Standard 34
21、0/360-2004. TABLE OF CONTENTS SECTION PAGE Section 1. Purpose . 1 Section 2. Scope 1 Section 3. Definitions 1 Section 4. Classifications . 3 Section 5. Test Requirements 4 Section 6. Rating Requirements 4 Section 7. Minimum Data Requirements for Published Ratings . 13 Section 8. Operating Requiremen
22、ts .13 Section 9. Marking and Nameplate Data .15 Section 10. Conformance Conditions 15 TABLES Table 1. Classification of Commercial and Industrial Unitary Air-Conditioning Equipment . 3 Table 2. Classification of Commercial and Industrial Unitary Heat Pump Equipment . 4 Table 3. Conditions for Stand
23、ard Rating and Operating Tests . 5 Table 4. Expression of Standard Capacity Ratings 6 Table 5. Minimum External Pressure . 7 Table 6. IEER Part-Load Rating Conditions 9 APPENDICES Appendix A. References - Normative 16 Appendix B. References - Informative 16 Appendix C. Capacity Calculation for Unita
24、ry Equipment Using an Outdoor Air Cooling Coil Normative . 17 Appendix D. Method and Example of Calculating Integrated Part-Load Values (IPLV) Normative 19 TABLES FOR APPENDICES Table D1. Example IPLV Calculation (I-P Units) 22 FIGURES FOR APPENDICES Figure C1. Test Set-Up for Units Using an Outdoor
25、 Coil 18 Figure D1. Part-Load Factor Example 21 ANSI/AHRI STANDARD 340/360-2007 1 PERFORMANCE RATING OF COMMERCIAL AND INDUSTRIAL UNITARY AIR-CONDITIONING AND HEAT PUMP EQUIPMENT Section 1. Purpose 1.1 Purpose. The purpose of this standard is to establish for Commercial and Industrial Unitary Air-Co
26、nditioning and Heat Pump Equipment: definitions; classifications; test requirements; rating requirements; minimum data requirements for Published Ratings; operating requirements; marking and nameplate data; and conformance conditions. 1.1.1 Intent. This standard is intended for the guidance of the i
27、ndustry, including manufacturers, engineers, installers, contractors and users. 1.1.2 Review and Amendment. This standard is subject to review and amendment as technology advances. Section 2. Scope 2.1 Scope. This standard applies to factory-made Commercial and Industrial Unitary Air-Conditioning an
28、d Heat Pump Equipment as defined in Section 3. 2.1.1 Energy Source. This standard applies only to electrically operated, vapor compression refrigeration systems. 2.2 Exclusions. This standard does not apply to the following: 2.2.1 Rating and testing of individual assemblies, such as condensing units
29、 or coils, for separate use. 2.2.2 Unitary Air-Conditioners as defined in AHRI Standard 210/240, Unitary Air-Conditioning and Air-Source Heat Pump Equipment, with capacities less than 65,000 Btu/h 19,000 W, or to Unitary Heat Operated Air-Conditioning Equipment, or Water-Source Heat Pumps as defined
30、 in ISO 13256-1, Water-source heat pumps Testing and rating for performance Part I: Water-to-air and Brine-to-air heat pumps. 2.2.3 Rating of units equipped with desuperheater/water heating devices (as defined in ANSI/ASHRAE Standard 137) in operation. Section 3. Definitions All terms in this docume
31、nt follow the standard industry definitions in the current edition of ASHRAE Terminology of Heating, Ventilation Air-Conditioning and Refrigeration, unless otherwise defined in this section. 3.1 Coefficient of Performance. A ratio of the cooling/heating capacity in watts W to the power input values
32、in watts W at any given set of rating conditions expressed in watts/watts W/W. For heating COP, supplementary resistance heat shall be excluded. 3.1.1 Standard Coefficient of Performance. A ratio of the capacity to power input value obtained at Standard Rating Conditions. 3.2 Commercial and Industri
33、al Unitary Air-Conditioner. One or more factory-made assemblies, which normally include a cooling coil, an air moving device, a compressor(s) and condenser combination, and may include a heating Function as well. Where such equipment is provided in more than one assembly, the separate assemblies sha
34、ll be designed to be used together, and the requirements of rating outlined in this standard shall be based upon the use of matched assemblies. ANSI/AHRI STANDARD 340/360-2007 2 3.2.1 Functions. The Functions of Commercial and Industrial Unitary Air-Conditioners, either alone or in combination with
35、a heating plant, are to provide air-circulation, cooling, dehumidification, and may include the Functions of heating, humidifying, outdoor air ventilation, and air cleaning. 3.3 Commercial and Industrial Unitary Heat Pump. One or more factory-made assemblies, which normally include an indoor conditi
36、oning coil, an air moving device, compressor(s), and an outdoor coil(s), including means to provide a heating Function and may or may not include a cooling Function. When such equipment is provided in more than one assembly, the separate assemblies shall be designed to be used together, and the requ
37、irements of rating outlined in the standard shall be based upon the use of matched assemblies. 3.3.1 Functions. Commercial and Industrial Unitary Heat Pumps shall provide the Function of heating and may include the Function of air circulation, air cooling, dehumidifying or humidifying, outdoor air v
38、entilation, and air cleaning. 3.4 Cooling Capacity. The capacity associated with the change in air enthalpy which includes both the Latent and Sensible Capacities expressed Btu/h W. 3.4.1 Latent Capacity. Capacity associated with a change in humidity ratio. 3.4.2 Sensible Capacity. Capacity associat
39、ed with a change in dry-bulb temperature. 3.5 Energy Efficiency Ratio (EER). A ratio of the Cooling Capacity in Btu/h to the power input values in watts at any given set of rating conditions expressed in Btu/Wh. 3.6 Integrated Energy Efficiency Ratio (IEER). A single number cooling part-load efficie
40、ncy figure of merit calculated per the method described in 6.2.2. 3.7 Integrated Part-Load Value (IPLV). A single number cooling part-load figure of merit calculated per the method described in Appendix D. 3.8 Published Rating. A statement of the assigned values of those performance characteristics,
41、 under stated Rating Conditions, by which a unit may be chosen to fit its application. These values apply to all units of like nominal size and type (identification) produced by the same manufacturer. The term Published Rating includes the rating of all performance characteristics shown on the air-c
42、onditioner or heat pump or published in specifications, advertising, or other literature controlled by the manufacturer, at stated Rating Conditions. 3.8.1 Application Rating. A rating based on tests performed at application Rating Conditions (other than Standard Rating Conditions). 3.8.2 Standard R
43、ating. A rating based on tests performed at Standard Rating Conditions. 3.9 Rating Conditions. Any set of operating conditions under which a single level of performance results and which causes only that level of performance to occur. 3.9.1 Standard Rating Conditions. Rating conditions used as the b
44、asis of comparison for performance characteristics. 3.10 “Shall“ or “Should“. “Shall“ or “should“ shall be interpreted as follows: 3.10.1 Shall. Where “shall“ or “shall not“ is used for a provision specified, that provision is mandatory if compliance with the standard is claimed. 3.10.2 Should. “Sho
45、uld” is used to indicate provisions which are not mandatory but which are desirable as good practice. 3.11 Standard Air. Air weighing 0.075 lb/ft31.2 kg/m3 which approximates dry air at 70F 21C and at a barometric pressure of 29.92 in Hg 101.3 kPa. ANSI/AHRI STANDARD 340/360-2007 3 Section 4. Classi
46、fications Commercial and Industrial Unitary Air-Conditioning and Heat Pump Equipment within the scope of this standard shall be classified as shown in Tables 1 and 2. Table 1. Classification of Commercial and Industrial Unitary Air-Conditioning Equipment Types of Commercial and Industrial Unitary Ai
47、r-Conditioners Designation AHRI Type1, 2 Arrangement Single Package SP-A SP-E SP-W FAN COMP EVAP COND Year-Round Single Package SPY-A SPY-E SPY-W FAN HEAT COMP EVAP COND Condensing Unit, Coil and Blower RCU-A-CB RCU-E-CB RCU-W-CB FAN EVAP COMP COND Year-Round Condensing Unit, Coil and Blower RCUY-A-
48、CB RCUY-E-CB RCUY-W-CB FAN HEAT EVAP COND COMP Remote Condenser RC-A RC-E RC-W FAN EVAP COMP COND Condensing Unit, Coil Alone RCU-A-C RCU-E-C RCU-W-C EVAP COND COMP Year-Round Remote Condenser RCY-A RCY-E RCY-W FAN EVAP HEAT COMP COND Note: 1A suffix of “-O” following any of the above classification
49、s indicates equipment not intended for use with field-installed duct systems (6.1.3.2b). 2 A suffix of “-A” indicates air-cooled condenser, “-E” indicates evaporatively-cooled condenser, and “-W” indicates water-cooled condenser. ANSI/AHRI STANDARD 340/360-2007 4 Table 2. Classification of Commercial and Industrial Unitary Heat Pump Equipment Types of Commercial and Industrial Unitary Heat Pumps Designation AHRI Type1 Arrangement Heating and Cooling Heating Only Single Package HSP-A HOSP-A FAN COMP INDOOR COIL
