AIA NAS 1083-1088-2001 (Inactive for Design)Bolt 100 Degree Flush Head Hi-Torque Recess Titanium Alloy (Short Thread) Inactive for Design After December 31 1976 See NAS 1790 for .pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

AGMA 05FTM14-2005 Determining the Shaper Cut Helical Gear Fillet Profile《整形切削斜齿轮倒角轮廓的测定》.pdf

AGMA 05FTM15-2005 Repair of Helicopter Gears《直升机齿轮的维修》.pdf

AGMA 05FTM16-2005 CH47D Engine Transmission Input Pinion Seeded Fault Test《CH47D发动机传动输入小齿轮辅助故障试验》.pdf

AGMA 05FTM17-2005 Influences of Bearing Life Considerations on Gear Drive Design《考虑齿轮传动设计的轴承寿命影响》.pdf

AGMA 05FTM18-2005 Planet Pac Increasing Epicyclic Power Density and Performance Through Integration《Planet Pac 通过集成提高周转功率的密度和性能》.pdf

AGMA 05FTM19-2005 The Application of Very Large Weld Fabricated Carburized Hardened & Hard Finished Advanced Technology Gears in Steel《钢制大型、焊接制作、渗碳硬化和硬质精整高级技术齿轮的应用》.pdf

AGMA 05FTM20-2005 Dual Drive Conveyor Speed Reducer Failure Analysis《双驱动输送机减速器故障分析》.pdf

AGMA 06FTM01-2006 The Effects of Super Finishing on Bending Fatigue《超细加工对弯曲疲劳的影响》.pdf

AGMA 06FTM02-2006 Isotropic Superfinishing of S--76C+ Main Transmission Gears《S--76C+主传送齿轮的等向超细加工》.pdf