AIA NAS 1306-2001 (Inactive)Bolt Tension Hexagon Head 160 KSI Ftu Inactive for Design After October 30 1981 See NAS 6603 Thru NAS 6620 For Description of Status Notes See NAS 380 R.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

AGMA 908-B89-1989 Geometry Factors for Determining the Pitting Resistance and Bending Strength of Spur Helical and Herringbone Gear Teeth《测定直形、螺旋形和人字形齿轮轮齿抗点蚀性和弯曲强度的几何系数》.pdf

AGMA 909-A06-2006 Specifications for Molded Plastic Gears《模制塑料齿轮的规范》.pdf

AGMA 90FTM1-1990 Contact Stresses in Gear Teeth《齿轮齿上的接触应力》.pdf

AGMA 90FTM10-1990 The Mechanism of Failure With and Without Titatanium Nitride Coating in Roller Tests《滚柱试验中带与不带氮化钛涂层的失效机理》.pdf

AGMA 90FTM11-1990 Multiple Iteration- Respectable Trial-and-Error《多重迭代.大量反复试验和误差》.pdf

AGMA 90FTM12-1990 Design of New Systems of Controlled Speed Drives《控制变速驱动器的新系统设计》.pdf

AGMA 90FTM13-1990 Face Milling or Face Hobbing《端面铣削或端面滚铣》.pdf

AGMA 90FTM14-1990 A Closed and Fast Solution Formulation for Practice Oriented Optimization of Real Spiral Bevel and Hypoid Gear Flank Geometry《真实螺旋锥齿和准双曲面齿轮侧面几何学的实际导向优化用闭合和快速解决方案》.pdf

AGMA 90FTM15-1990 Optimal Design of Straight Bevel Gears《直齿伞锥齿轮的优化设计》.pdf