AIA NAS 1322-1326-1971 Pin - Threaded Shear Protruding Head Rev 3 R(1991).pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

HB 7546-1997 加工钛合金用焊硬质合金螺旋刀片的二齿削平型直柄数控立铣刀.d=16～32mm.pdf

HB 7547-1997 加工钛合金用焊硬质合金螺旋刀片的二齿端刃过中心削平型直柄数控立铣刀.d=16～32mm.pdf

HB 7548-1997 加工钛合金用焊硬质合金螺旋刀片的二齿削平型直柄左螺旋数控立铣刀.d=16～32mm.pdf

HB 7549-1997 加工钛合金用焊硬质合金螺旋刀片的二齿端刃过中心削平型直柄左螺旋数控立铣刀.d=16～32mm.pdf

HB 7550-1997 加工钛合金用焊硬质合金螺旋刀片的二齿双削平型直柄数控立铣刀.d=22～32mm.pdf

HB 7551-1997 加工钛合金用焊硬质合金螺旋刀片的二齿端刃过中心双削平型直柄数控立铣刀.d=22～32mm.pdf

HB 7552-1997 加工钛合金用焊硬质合金螺旋刀片的二齿双削平型直柄左螺旋数控立铣刀.d=22～32mm.pdf

HB 7553-1997 加工钛合金用焊硬质合金螺旋刀片的二齿端刃过中心双削平型直柄左螺旋数控立铣刀.d=22～32mm.pdf

HB 7555-1997 加工钛合金用焊硬质合金螺旋刀片的四齿削平型直柄左螺旋数控立铣刀.d=20～32mm.pdf