AIA NAS 339-2000 Screw Shear 100 Degree Standard Flush Head Close Tolerance 95 KSI Fsu FSC 5305 REV 14.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

JB T 7948.4-1995 熔炼焊剂化学分析方法EDTA 容量法测定氧化铝量.pdf

JB T 7948.5-1995 熔炼焊剂化学分析方法磺基水杨酸光度法测定氧化铁量.pdf

JB T 7948.6-1995 熔炼焊剂化学分析方法热解法测定氟化钙量.pdf

JB T 7948.7-1995 熔炼焊剂化学分析方法氟氯化铅——EDTA 容量法测定氟化钙量.pdf

JB T 7948.8-1995 熔炼焊剂化学分析方法钼蓝光度法测定磷量.pdf

JB T 7948.9-1995 熔炼焊剂化学分析方法火焰光度法测定氧化钠、氧化钾量.pdf

JB T 7951-1999 淬火介质冷却性能试验方法.pdf

JB T 7956.1-1999 1 50锥度销子铰刀.第1部分 手用铰刀.pdf

JB T 7956.2-1999 1 50锥度销子铰刀.第2部分 手用长刃铰刀.pdf