AIA NAS 51-1956 (Inactive)Rings - External Retainer Superseded - July 1956 (Use NAS 670) (Rev 2).pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

AECMA PREN 4274-1997 Aerospace Series Aluminium Alloy AL-P6082-T6511 Extruded Bar and Section a or D Less Than or Equal to 200 mm with Peripheral Coarse Grain Control Edition P 1《航.pdf

AECMA PREN 4275-1997 Aerospace Series Aluminium Alloy AL-P7075-T76511 Extruded Bar and Section a or D Less than or Equal to 100 mm with Peripheral Coarse Grain Control Edition P 1《.pdf

AECMA PREN 4276-1998 Aerospace Series Aluminium Alloy AL-P7175-T7351 Hand Forgings a Less Than or Equal to 150mm Edition P 1《航空系列 铝合金AL-P7175-T7351手柄锻造a小于或等于150mm.P1版》.pdf

AECMA PREN 4277-1998 Aerospace Series Aluminium Alloy AL-P7175-T73 Hand and Die Forgings a Less Than or Equal to 125 mm Edition P 1《航空系列 铝合金AL-P7175-T73手柄和热模锻a小于或等于125mm.P1版》.pdf

AECMA PREN 4278-1998 Aerospace Series Aluminium Alloy AL-P7175-T7352 Hand and Die Forgings a Less Than or Equal to 150 mm Edition P 1《航空系列 铝合金AL-P7175-T7352手柄和热模锻a小于或等于150mm.P1版》.pdf

AECMA PREN 4282-1998 Aerospace Series Aluminium Alloy AL-P2219-T37 Plate 6 mm Less Than a Less Than or Equal to 40 mm Edition P 1《航空系列 铝合金AL-P2219-T37金属板6mm小于或等于a小于或等于40mm.P1版》.pdf

AECMA PREN 4283-2003 Aerospace Series Aluminium Alloy AL-P2219-T87 Plate 6 mm Less Than a Less Than or Equal to 40 mm Edition P 2《航空系列 铝合金AL-P2219-T87金属板6mm小于或等于a小于或等于40mm.P2版》.pdf

AECMA PREN 4284-1998 Aerospace Series Aluminium Alloy AL-P2219-T852 Forgings a Less Than or Equal to 400 mm Edition P 1《航空系列 铝合金AL-P2219-T852锻造a小于或等于400mm.P1版》.pdf

AECMA PREN 4285-1998 Aerospace Series Aluminium Alloy AL-P2219-T851 Forgings a Less Than or Equal to 400 mm Edition P 1《航空系列 铝合金AL-P2219-T851锻造小于或等于400mm.P1版》.pdf