AIA NAS 578-2001 Retainer - Floating Barrel Nut Rev 8 FSC 5340.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

HB 4640-1992 加工铝合金用锥柄麻花钻 d=6.00~30.00mm.pdf

HB 4641-1992 加工铝合金用锥柄长麻花钻 d=6.00~30.00mm.pdf

HB 4642-1992 加工铝合金用锥柄加长麻花钻 d=6.00~30.00mm.pdf

HB 4643-1992 加工铝合金用麻花钻技术条件.pdf

HB 4644-1992 加工铝合金用麻花钻钻槽铣刀 用于直径1.00~4.00mm的麻花钻.pdf

HB 4645-1992 加工铝合金用麻花钻钻槽铣刀 用于直径4.10~30.00mm的麻花钻.pdf

HB 4646-1992 样板及校对样板 检验1560401~514钻槽铣刀截形用.pdf

HB 4647-1992 镶硬质合金刀片的直柄麻花钻 d=5~12mm.pdf

HB 4648-1992 镶硬质合金刀片的锥柄麻花钻 d=6~30mm.pdf