AIA NAS 5800-1994 (Inactive)Screw 100 Degree Head Tri-Slot Recess 6AL-4V Titanium Alloy Full Thread Self-Locking and Nonlocking (Rev 5).pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GB T 20947-2007 起重用短环链 T级(T、DAT和DT型)高精度葫芦链.pdf

GB T 20948-2007 农林拖拉机 后视镜技术要求.pdf

GB T 20949-2007 农林轮式拖拉机 照明和灯光信号装置的安装规定.pdf

GB T 20953-2007 农林拖拉机和机械 驾驶室内饰材料燃烧特性的测定.pdf

GB T 20954-2007 金属切削刀具 麻花钻术语.pdf

GB T 20955-2007 金属切削刀具 丝锥术语.pdf

GB T 20956-2007 印刷机械 切纸机设计及结构安全规则.pdf

GB T 20957.1-2007 精密加工中心检验条件 第1部分：卧式和带附加主轴头机床几何精度检验(水平Z轴).pdf

GB T 20957.2-2007 精密加工中心检验条件 第2部分：立式或带垂直主回转轴的万能主轴头机床几何精度检验(垂直Z轴).pdf