AIA NAS 7024-1984 Pin Swage Locking 108 KSI Steel 100 Degree Shear Tension Head Pull-Type Revision 1 FSC 5320 R(2001).pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

AGMA 02FTM11-2002 A Gear Design Optimization Procedure that Identifies Robust Minimum Stress and Minimum Noise Gear Pair Designs《确认坚固、最低应力与最小噪声齿轮副设计的齿轮设计优化程序》.pdf

AGMA 02FTM2-2002 Development and Application of Computer-Aided Design and Tooth Contact Analysis of Spiral-Type Gears with Cylindrical Worms《带圆柱蜗杆螺旋型齿轮的计算机辅助设计和齿面接触分析的开发与应用》.pdf

AGMA 02FTM3-2002 Application of Statistical Stability and Capability for Gear Cutting Machine Acceptance Criteria《齿轮切割机验收标准用性能和统计学稳定性的应用》.pdf

AGMA 02FTM4-2002 Multibody-System-Simulation of Drive Trains of Wind Turbines《风力涡轮机的驱动齿轮组的多体系统仿真》.pdf

AGMA 02FTM5-2002 Crack Length and Depth Determination in an Integrated Carburized Gear Bearing《综合渗碳齿轮 轴承中裂缝长度和深度测定》.pdf

AGMA 02FTM6-2002 Contemporary Gear Hobbing - Tools and Process Strategies《当代滚齿.工具和加工策略》.pdf

AGMA 02FTM7-2002 Selecting the Best Carburizing Method for the Heat Treatment of Gears《齿轮的热处理用最优渗碳方法的选择》.pdf

AGMA 02FTM8-2002 Compliant Spindles in Lapping and Testing Machines《研磨和试验机的兼容纱锭》.pdf

AGMA 02FTM9-2002 Gear RollScan for High Speed Gear Measurement《高速齿轮测量用齿轮滚动扫描》.pdf