AIA NASM122077-1999 Insert CRES Helical Coil Coarse Thread 1 Dia Nominal Length FSC 5325.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

HB 6938-1994 二齿球头立铣刀用偏背刀 用于HB 6929-94 HB 6932-94 D=56~63mm.pdf

HB 6939-1994 二齿球头立铣刀偏背刀用样板和校对样板检测HB6938-94槽铣刀用.pdf

HB 694-1992 镶齿三面刃铣刀.D=224~315mm.pdf

HB 6940-1994 四齿球头立铣刀用槽铣刀 用于HB 6930-94 HB6933-94 D=45~80mm.pdf

HB 6941-1994 四齿球头立铣刀槽铣刀用样板和校对样板检测 HB 6940-94 槽铣刀用.pdf

HB 6942-1994 六齿球头立铣刀用槽铣刀.用HB 6931-94 HB 6934-94.D=63~80mm.pdf

HB 6943-1994 六齿球头立铣刀槽铣刀用样板和校对样板检测HB 6942-94槽铣刀用.pdf

HB 6944-1994 数控机床用可转位复合夹紧45'。外圆车刀.pdf

HB 6945-1994 数控机床用可转位复合夹紧72'。30''外圆车刀.pdf