AIA NASM124850-1999 Insert CRES Helical Coil Fine Thread 3 Dia Nominal Length FSC 5325.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

QJ 997.13-1986 铣床辅助工具 弹性衬套(d=3～20).pdf

QJ 997.14-1986 铣床辅助工具 卧铣刀杆(尾柄 7∶24 40～50号).pdf

QJ 997.15-1986 铣床辅助工具 卧铣刀杆(尾柄 7∶24 40～50号).pdf

QJ 997.2-1986 铣床辅助工具 截短莫氏圆锥转接衬套(外锥莫氏3～4号 内锥莫氏2～5号).pdf

QJ 997.3-1986 铣床辅助工具 7∶24圆锥转接衬套(外锥7∶24 40～50号 内锥7∶24 30～40号).pdf

QJ 997.4-1986 铣床辅助工具 复合圆锥转接衬套(外锥7∶24 40～50号 内锥莫氏2～5号).pdf

QJ 997.5-1986 铣床辅助工具 长复合圆锥转接衬套(外锥7∶24 40号～50号 内锥莫氏1～5号).pdf

QJ 997.6-1986 铣床辅助工具 截短莫氏锥柄立铣刀夹头(尾锥7∶24 40～50号 内锥莫氏1～5号).pdf

QJ 997.7-1986 铣床辅助工具 截短莫氏锥柄立铣刀用夹头(尾锥莫氏 3～5号,内锥莫氏 3～4号).pdf