1、.) A-A-55104 9999974 0120850 556 CH-POUND 1 A-A-55 104 10 December 1992 COMMERCIAL ITEM DESCRIPTION COVERALLS, SAFETY, INDUSTRIAL The General Services Administration has authorized the use of this Commercial Item Description in preference to MIL-C-43339. Classification. The coveralls shall be in one
2、 type. Sizes. The coveralls shall be provided in the followi.ng sizes: Sizes - Extra-Small, Small, Medium, Large, Extra-Large. NOTE: Extra-Small, Small, Medium, Large, and Extra Large may be abbreviated as XS, SM, MED, LG, and XLG. Abstract. This commercial item description covers the requirements f
3、or an industrial, lint-free coverall intended for wear by male personnel in the Department of Defense. Salient Characteristics. The coveralls shall be made from polyester taffeta cloth, have 5 buttons and 5 buttonholes, closure, shirt style collar, long sleeves, a right hip pocket and a left chest p
4、ocket with pencil opening. shall be double lapped, double stitched: Shoulder joining seams, setting sleeve seams, underarm sleeves, trouser to jacket joining seam, seat seam, inseams and outseams. The pockets shall be double stitched (see Figure 1). 0 front The following seams Beneficial comments (r
5、ecommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: Defense Personnel Support Center, Clothing and Textiles Directorate, Attn: DPSC-FSSD, 2800 South 20th Street, Philadelphia, PA 19101-8419, by using the self-addressed S
6、tandardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter. AMSC N/A FSC 8415 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Provided by IHSNot for ResaleNo reproduction or networking permitted without license fro
7、m IHS-,-,-A-A-55104 W 9999974 OL208.51 492 W A-A-55 104 Material. The basic material shall be polyester taffeta plain weave cloth. The warp and filling yarns shall be semi-dull, multifilament, polyethylene glycol terephthalate. (A certificate of compliance shall be submitted for this requirement). T
8、he finished fabric shall have a minimum of 74 warp yarns per inch and 62 filling yarns per inch conforming to ASTM Test Method D3775 with a weight of 2.8 ounces per sq. yd. conforming to ASTM Test Method D3776. The color of the cloth shall be Tan 448. The dyed cloth shall show “good“ colorfastness t
9、o light, laundering and perspiration, and shall have a Munsell Value for crocking no lower than 8.5. The cloth shall not shrink more than 2.0 percent in either the direction of the warp or of the filling when tested in the “End Item Performance Testing“. End Item Performance Testinq. . Characteristi
10、c Colorfastness to: Breaking strength (Grab method): Crocking Warp Filling Air permeability Anti-static finish: Before laundering After laundering Shrinkage Test methods AATCC-8-1988 ASTM-D-1682 ASTM-D-1682 ASTM-D-737-75 ASTM-D-4238 ASTM-D-4238 AATCC-96-1988 Antistatic finish. The cloth shall be giv
11、en a durable antistatic finish so that the maximum rfyistivity of any one sample before laundering shall be 1.0 X 10 ohms per square and the maximum resistivfty of any one sample after five laundering shall be 5.0 x 10 ohms per square. The durable antistatic treatment can be met with Aston 123, and
12、Stanax (Not Stanax 1166). Other approved treatments may be listed in the invitation to bids or request for proposal. must have prior approval from the contracting officer. Thread. The polyester thread for seaming, stitching, attaching buttons, and making buttonholes shall be twisted soft multiple co
13、rd or twisted bonded multiple core. size 50 for the needle and size 24 for the bobbin/looper with the breaking strength of 4.3 to 4.5 for size 50 and a breaking strength of 2.0 to 2.3 for size 24. Gimp. The gimp for reinforcing buttonholes (when applicable) shall be Khaki P-1, C.A. 66019, cotton, so
14、ft finish or glazed finish, size 8. Colorfastness. The dyed gimp shall show “good“ fastness to laundering (after 3 cycles). Other products considered for this use Nominal Tex size shall be 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-55104 =
15、 9999974 0320852 329 W A-A-5 5 104 Labels. Each coverall shall have a combination identification- size label and an instruction label for garments or combination . size, identification, and instruction label which shall be nonwoven, spunbonded polyester cloth or nonwoven, 80/20 polyester/cellulose c
16、loth, impregnated, acrylic coated, and shall not contain skin irritants or toxic materials, mildew-resistant printed. Labels shall show good colorfastness to accelerated laundering. COVERALLS, MENS NAME OF CONTRACTOR: NAME OF MANUFACTURER (if other than contractor) CONTRACT NO; DLA-100-00-00-0000 (E
17、XAMPLE) Instruction label. The instruction label shall contain the following information: COVERALL, SAFETY, INDUSTRIAL 1. Wear over personal clothing; will provide a lint-free 2. Do not expose to intense heat: material will melt. 3. Launder by hand or machine with a detergent solution. surface. Butt
18、ons. The sewing hole buttons shall be a Melamineformaldehyde composition, 30 line and .200 inch thick Khaki AL. Buttonholes. Buttonholes shall be of sufficient size to accommodate the correct size button. The purling shall be on the outside of the coverall. Sizes and Measurements. The finished cover
19、all shall conform to the measurements below. Table I Table of measurements (inches) Size X-Sm. Sm. Med Lg X-Lg. Toler ance 1/2 Chest L/ 20-1/2 22-1/2 24-1/2 26-1/2 28-1/2 i 1 1/2 Waist 2/ 17 19 21 23 25 - +1 Sleeve inseam a/ 23 23 23 23 23 - +1 Leg inseam 41 Overall length I/ 32 32 32 32 32 64-1/2 6
20、5-1/2 66-1/2 67-1/2 68-1/2 2 1 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-55104 m 9999974 0120853 2b5 m A-A-55 1 O 4 - i/ armholes. - 2/ edge to folded edge. - 3/ sleeve. - 4/ - 5/ Workmanship. After completion, the finished coverall shall b
21、e clean, and all loose thread, lint, and foreign matter removed. With coverall buttoned, measure across front at base of With coverall buttoned, measure across waist seam from folded Measure from base of armhole along sleeve seam to bottom of Measure from crotch seam along inseam to bottom of leg. M
22、easure from base of neck along center back to bottom of leg. Product Demonstration Model. When required, offerers shall submit samples of their intended production. The Product Demonstration Model will consist of units independently developed. evaluated by the government. award are contained in the
23、solicitation. Models will be retained by the government. One (i) Product Demonstration Model approved by DPSC under the resultant contract will serve as a manufacturing standard for the corresponding production items delivered under this contract. advised that the Product Demonstration Model does no
24、t relieve the successful offerer of his responsibility to perform in accordance with the Commercial Item Description specified above. Product Demonstration Models will be analyzed and Evaluation criteria and basis for Product Demonstration Offerers are Requlatorv Requirements. use recovered material
25、s in accordance with Public Law 94-580 to the maximum extent practicable. The offeror/contractor is encouraged to Qualitv Assurance Certification. The contractor shall certify that the product offered meets the salient characteristics of this description and that the product conforms to the producer
26、s own drawings, specifications, standards and quality assurance practices. government reserves the rights to require proof of such conformance prior to the first delivery and thereafter as may be otherwise provided for under the provisions of the contract. Examination. Lots of coveralls shall be ins
27、pected in accordance with “Sampling Procedures and Table for Inspection by Attributes“, ANSI/ASQC 21.4, published by the American Society for Quality Control. Visual Examination. shall be II and the AQL 1.5 expressed in terms of defects per hundred units. The The inspection level for visual examinat
28、ion The sample unit is one coverall. 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-55104 W 9999974 0320854 IT1 W A-A-55 1 O 4 Dimensional examination. The finished coveralls shall conform to the dimensions specified. Any dimension that is not
29、 within the established tolerance shall be classified as a defect. The sample unit shall be one coverall; the inspection level shall be hundred units , S-4 and the AQL shall be 1.0 expressed in terms of defects per Packaainq examination. The fully packaged shipping containers shall be examined in ac
30、cordance with defects listed below. The lot size shall be the number of shipping containers in the inspection lot. The inspection level shall be S-1 and AQL shall be 2.1 expressed in terms of defects per hundred units. Examination Defect Ma teri a 1 Missing, damaged, not as required. Content Number
31、of coveralls per shipping container is more or less than required. Defects. The coveralls shall be examined for the following defects: any defects in design, material, construction and workmanship; any component full, tight or twisted; any open seam; cut, tear, smash, run or loose yarn; baggy, ridgy
32、 or wavy cloth; any shade bar, dye streak, or area of poor dye penetration; any spot or stain clearly noticeable; any thread not removed; label missing, incorrect, or illegible; any size hole; measurement of item not specified. a Packaaina, Packina, Markina, and Palletization Packaging, packing, mar
33、king and palletization shall be in accordance with ASTM-D 3951, Standard Practice for Commercial Packaging, as specified for shipments to the Department of Defense, including Section 7. Shipping cartons shall be style RSC-L, variety SW, with DW liners, class Domestic, grade 275. Note: Each shipping
34、container shall contain only one National Stock Number (NSN) and a total quantity of forty coveralls packaged as specified above. Unitized loads, placing boxes on pallets, shall be used whenever total quantity for shipment to one destination exceeds 250 pounds (excluding the pallet) or 20 cubic feet
35、. Pallets shall have a length of 40 inches and a width of 48 inches. Pallet loads, including the pallet, shall not exceed 54 inches in height, 43 inches in length and 52 inches in width. The containers shall be bonded onto wing type commercial 4-way entry pallets. 0 Provided by IHSNot for ResaleNo r
36、eproduction or networking permitted without license from IHS-,-,-A-A-55104 m 9999974 0120855 038 m A-A-551 04 Note: All palletized loads shall contain only one NSN, to the maximum extent possible. per NSN, pallets may have containers not of the same NSN, but the pallet shall be clearly marked “mixed
37、“ and each applicable NSN shall be listed together with its total quantity. When there is less than a pallet load Source of Government Documents. documents are available from: Copies of Military and Federal Standardization Documents Order Desk Bldg. 4D 700 Robbins Avenue Philadelphia, PA 19111-5094
38、Sources of Nonuovernment Documents. ANSI/ASQC 21.4 - Sampling Procedures and Tables For Inspection By Attributes (Applications for copies should be addressed to American National Standards Institute, 1430 Broadway, New York, NY 10018- 3308). ASTM-D 3951 - Standard Practice for Commercial Packaging (
39、Applications for copies should be addressed to American Society For Testing and Materials, 1916 Race Street, Philadelphia, PA 19103). Sources of Supply Aston 123 - Refined Onyx, Division of Millmaster Onyx Corp., 624 Schuyler Ave., Lyndhurct, NC 07071 Stanax Standard Chemical Products Co., Inc., (no
40、t Stanax 1166) 1301 Jefferson Street Hoboken, NJ 07030 Custodian: Army - GL Navy - NU Air Force - 99 Review Activity: Air Force - 82 Army - MD User Activity: Air Force - 45 6 Civil Agency Coordinating Activity: GSA - FSS Preparing Activity: DLA - CT Project NO. 8415-0872 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-. e e a A-A-55104 m 9999974 0320856 T74 m A-A-5 5 104 FIGURE 1. Coveralls, Safety, Industrial 7 I Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
