1、A-A-5 8 006 10 APRIL 1992 COMMERCIAL ITEM DESCRIPTION 4-WHEEL DRIVEN, MULTI-PURPOSE TRACTOR The General Services Administration has authorized the use of this comercial item description. 1. Abstract: This item description covers a 4-wheel driven, articulated tractor which is designed to accept vario
2、us attachments to accomplish tasks such as mowing, sweeping, snow removing and etc. 2. Salient characteristics: 2.1 width shall not exceed 52 inches. less. Overall length of the tractor shall be 150 inches or less. Overall Overall height shall be 85 inches or 2.2 weather starting assistance device,
3、such as glow plugs, shall be utilized. The engine shall be rated no less than 60 horsepower. meet or exceed all current EPA Emissions Standards. 2.3 contain sufficient fuel to operate the tractor for a minimum of eight hours, A fuel filter, which shall be easily accessed, fuel system. The tractor sh
4、all be equipped with a diesel engine. Some type of cold This engine shall A 10 gallon or larger fuel tank is required. The fuel tank shall o shall be installed in the 2.4 A transmission, either automatic or manual, shall be used to transmit the energy from the engine to the front and rear axles of t
5、he tractor. 2.5 Power take-off shaft(s) shall be installed onto the tractor for powering various attachments. 2.6 The inside turning diameter of the tractor shall be 12.5 feet or less. 2.7 MPH. MPH. The top forward driving speed of the tractor shall be no less than 18 The top reverse driving speed o
6、f the tractor shall be no less than 6 Beneficial comments, recommendations, additions, deletions, clarifications, etc. and any data which may improve this document should be sent to: WR-ALC/LZMD Robins AFB, GA 31098-5609 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimite
7、d. FSC 2420 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-58006 24 m 9999974 0064876 5 m * A-A-5 8 O O 6 2.8 shall be capable of accepting wheel weights for tractive effort for effective snow removal. 2.9 The tractor shall include manufacturers
8、 standard service brakes and parking brake. 2.10 A 12 volt battery capable of starting the diesel engine and powering the electrical components shall be included on the tractor. An alternator, 60 Amperes minimum shall be included. All wiring outside of the cab shall be protected from the environment
9、. 2.11 The tractor shall include one set of regular head lights and one set of top front mounted lights, which can be used in combination with the front mounted attachments such as a snowblower. signal lights, back-up light, and rotating beacon (amber) shall also be included. 2.12 The tractor shall
10、be painted with manufacturers standard forest green paint. 2.13 All tractors shall be treated with the manufacturers commercial standard rust-proofing treatment. 2.14 The tractor shall include a cab which is approved by OSHA. shall be equipped with temperature/sound insulation lining. sound level sh
11、all be 80 dba maximum. exceed 83 dba. system with filter(s) for the cab shall also be provided. 2.15 The tractor shall be capable of utilizing contractor supplied attachments for standard category 1, 3 points mounting, front and rear. These attachments shall be capable of, at a minimum but not limit
12、ed to, mowing, sweeping, and snow removing. Means of mounting a dump box, 250 gallons spray tank, and 3/4 yard spreader over the rear axles shall be provided. accomplished by one personnel in fifteen minutes or less. 2.16 The following instruments shall be included: tachometer with hourmeter, fuel g
13、auge, engine temperature gauge, and oil pressure gauge. 3. Regulatory requirements: The of feror/contractor is encouraged to use recovered materials in accordance with Public Law 94-580 to the maximum extent practical. 4. Contractor certification: Tires shall be tubeless, agriculture type, 8 ply or
14、more. The tires Front and rear tires shall be of equal size, Two tail/brake lights, turn The cab The interior The outside sound level shall not The cab shall include a minimum of two doors. An air intake The attachment or detachment of the implements shall be easily The manufacturer shall certify th
15、at the product offered meets the salient characteristics of this description and that the product conforms to his own specifications, drawings, standards and quality assurance practices and is 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-9 A-A-5
16、8 006 the same product offered for sale in the commercial marketplace. Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for in the terms of the contract. The 5. Market Acceptability: Commercial. of award (with mino
17、r modifications, as that term is defined in DoD FAR Supplement 252.211-7012, Paragraph K-85 of the solicitation) of an established product previously produced and sold in substantial commercial quantities (exceeding the criteria at FAR 15.804-3(f) (2) (ii) (A) for at least 2 years immediately preced
18、ing the issuance date of the solicitation. The vehicle furnished, or earlier models of it, absent minor modifications, shall have routinely been supported with spares/repair parts which were produced or sold in the normal course of business. At the time delivery, the contractor shall furnish the Adm
19、inistrative Contracting Officer with verification of compliance with these requirements. as part of their proposals, the following information on the vehicle (or its. earlier models) being offered as a commercial item: The vehicle furnished must be the latest model as of the date Offerors shall prov
20、ide, (1) Total sales to the U.S. Government or to contractors for U.S. Government use during the 2 years immediately preceding the issuance date of the solicitation. (2) Total sale of the item to the general public during the 2 years immediately preceding the issuance date of the solicitation. (3) p
21、lace. Length of time the item has been sold in the commercial market (4) Points of contact and phone numbers of customers to which the item has been sold in the commercial market place. (5) Other pertinent information necessary to determine that the item is an established commercial item. 6. Packagi
22、nq, packing, and marking. Unless otherwise provided in the contract, the tractor shall be prepared for delivery by common carrier and shall provide for protection against loss or damage while in transit. An identification plate, permanently marked, shall be securely mounted at the drivers compartmen
23、t. shall contain the following information: The identification plate NOMENCLATURE MANUFACTURERS MODEL NUMBER MANUFACTURERS SERIAL NUMBER MANUFACTURER S NAME MANUFACTURERS ADDRESS MANUFACTURERS SERVICE PHONE NUMBER 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license
24、 from IHS-,-,-A-A-58006 24 = 9999974 O064878 9 W A-A-58006 DATE OF MANUFACTURE CONTRACT NUMBER NATIONAL STOCK NUMBER REGISTRATION NUMBER The following shall be required of the contractor at the time of delivery: The contractor shall meet all the requirements of Paragraph 2-3. Two sets of commercial
25、manuals, including operation, maintenance and parts shall be provided with each tractor delivered. contractors part numbers, as well as, the component and equipment manufacturers part numbers, as applicable. The parts manuals shall list the MILITARY INTERESTS: CIVIL AGENCY COORDINATING ACTIVITIES: Military Coordinatinq Activity Custodians Air Force - 99 Review Activity User Activity PREPARING ACTIVITY: Air Force - 84 Project 2420-0160 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
