AIR FORCE A-A-58036-1994 STAIRCASE AIRCRAFT BOARDING《飞机登机楼梯》.pdf

上传人:deputyduring120 文档编号:426939 上传时间:2018-11-07 格式:PDF 页数:4 大小:184.78KB
下载 相关 举报
AIR FORCE A-A-58036-1994 STAIRCASE AIRCRAFT BOARDING《飞机登机楼梯》.pdf_第1页
第1页 / 共4页
AIR FORCE A-A-58036-1994 STAIRCASE AIRCRAFT BOARDING《飞机登机楼梯》.pdf_第2页
第2页 / 共4页
AIR FORCE A-A-58036-1994 STAIRCASE AIRCRAFT BOARDING《飞机登机楼梯》.pdf_第3页
第3页 / 共4页
AIR FORCE A-A-58036-1994 STAIRCASE AIRCRAFT BOARDING《飞机登机楼梯》.pdf_第4页
第4页 / 共4页
亲,该文档总共4页,全部预览完了,如果喜欢就下载吧!
资源描述

1、I INCH-POUND 1 A-A-58036 August 10, 1994 COMMERCIAL ITEM DESCRIPTION STAIRCASE,AIRCRAFT BOARDING The General Services Administration has authorized the use of this commercial item description as a replacement for Mil-S-2685 1, type MA-1, for all federal agencies. 1. SCOPE. This commercial item descr

2、iption covers one type of mobile, aircraft boarding staircase, designated type MA-1. The intended use of this staircase is for loading and unloading passengers onto and off from various types of military aircraft in various temperature extremes and conditions. 2. SALIENT CHARACTENST ICs. Failure of

3、the aircraft boarding staircase to meet the following salient characteristics will require rejection of the offer. The aircraft boarding staircase shall be free from faulty construction or any defect which affects appearance, servicability, and durability. The loaders shall be representative of the

4、quality and workmanship found in aircraft boarding staircases offered for new commercial sale. 2.1 Desim an d construct ion: The staircase shall be designed and constructed so that no part will work loose in service. The staircase shall be constructed of lightweight, high strength- weight ratio mate

5、rial. 2.2 Adjustable height; The staircase shall be adjustable to all heights above ground level within the range of 85 to 145 inches. The adjustment provision shall be such that the top platform will mate with aircraft loading doors at any height without forming a height variance of more than +3/8

6、inch between the aircraft doorsill and the top platform. 2.3 Airortab ility: The staircase shall be capable of being transported in a C-141 military transport aircraft. The requirements for this are contained in MIL-STD-1791. I Beneficial comments, recommendations, additions, deletions, clarificatio

7、ns, etc. and any I data which may improve this document should be addressed to SA-ALC/TILDD with copy to SA-ALC/LDEE Kelly AFB, TX 78241-7280, by using the Standardization Document Improvement Proposal D Form 1426) appearing at the end of this document or by letter. AMSC NIA FSC 1730 DISTRIBUTION ST

8、ATEMENT A. Approved for public release, distribution is unlimited. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-58036 2.4 Mobility: The staircase shall have a high degree of mobility over rough concrete and smooth sod with emphasis on ease of

9、manual positioning about the aircraft. The staircase shall be capable of being towed at a maximum of 15 MPH. 2.5 RunninoGear Desa The staircase shall have four pnuematic-tired casters conforming to MIL-C-4751. Two MS24373-8WSC swivel casters shall be provided at the aircraft end of the staircase. Tw

10、o rigid casters shall be provided at the front of the staircase. Swivel locks shall be provided. 2.6 Towbar A towbar shall be provided. It shall be designed to permit rapid attachment and detachment and shall swivel in the vertical plane. Towbar attachment fittings shall be located at the rear, or a

11、ircraft end, of the staircase. Adequate means shall be provided for stowing the towbar in a suitable location on the staircase frame. 2.7 Perfomiance: The staircase shall be capable of withstanding a temperature range fiom -65 degrees to +160 degrees F. Withstand wind velocities up to 60 MPH fiom an

12、y direction. 2.8 Lift Mechanism: The staircase shall be provided with a lift mechanism that shall be operated manually through mechanical or hydraulic means from ground level by means of a hand-operated crank or lever. A device shall be provided to automatically lock the staircase in any ascent of d

13、escent position attained by the lift mechanism. 2.9 The staircase shall feature a 24-volt power system provided by batteries connected in series. The batteries shall be housed in an enclosed box in a convenient and protected location and fitted with a quick-release cover to facilitate ease of inspec

14、tion and servicing. 2.1 O Lighting Svst em: The staircase shall be equipped with amber-colored clearance lights located at the upper plagom and ground end. The slearance lights shall permit visibility from any position around the staircase. The steps shall be illuminated to a sufficient degree that

15、every step and the platform will be clearly visible at night to personnel ascending and descending the staricase. The step lights shall be recessed flush with the side of the staircase and shall illuminate the entire step and pla$onn areas. 2.11 5- - - la : Each step shall be 36 inches wide with a 1

16、2 inch tread and an 8 inch rise. The step treads shall not deviate more than 1-1/2 degrees from the horizontal plane in any position. The step treads shall be coated with nonslip material equivalent to standard commercial offering. The top step shall be made in the form of a platform and a suitable

17、bumper included to prevent damage to the aircraft. The width of the platform shall conform to the width of the steps and shall be 60 inches in length. 2.12 Finish: All exterior surfaces shall be painted using offerors standard commercial paint system. Finish color shall be 24052 as per FED-STD-595.

18、2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-5803b I 9999974 0368375 480 D A-A-58036 2.13 Immobilizingi Jacks: The staircase shall be provided with four immobilizing jacks, one at each corner of the base, to hold the staircase rigid during a

19、ll loading and unloading operations. The jacks shall be capable of supporting the fully elevated staircase with a static load of 500 lbs placed upon the top platform. The jacks shall be provided with a retracting mechanism so designed that manual release of the ground jack pressure will cause the ja

20、ck to fully retract without further attention of the operator. 2.14 Handrails: The staircase shall be provided with handrails on each side extending from the base of the stairs to the aircraft end of the top platform. The handrails shall maintain a constant height of 35 inches above the steps and to

21、p platform at all heights within the operating range of the staircase. 3. REGUL ATORY REOUIREMENTS. 3.1 Reclaimed Material: The offerorcontractor is encouraged to use recovered materials to the maximum extent practicable, in accordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR

22、). Used, rebuilt, or remanufactured components shall not be incorporated in the vehicle. 4. UALITY ASSURA NCE PROVISIONS. 4.1 Contractor Certfication: The contractor shall certify that the product offered meets the salient characteristics of this Commercial Item Description, and that the product con

23、forms to the producers own drawings, specifications, standards, and qaulity assurance practices, and is the same product offered for sale in the commercial marketplace. The government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise p

24、rovided for under the provisions of the contract. 4.2 Market Acceptability: Offerors shall provide, as part of their proposals, the following information on the vehicle (or its earlier models) being offered as a commercial item. 4.2.1 Total sales to the Government of to contractors for the U. S. Gov

25、ernment use during the three years immediately preceding the issuance date of the solicitation. 4.2.2 Total sales of the item to the general public during the three years immediately preceding the issuance date of the solicitation. 4.2.3 Length of time product has been sold in the commercial marketp

26、lace. 4.2.4 Points of contact and phone numbers of customers to which the item has been sold in the commercial marketplace. 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- A-A-5803b 9999974 0368376 317 A-A-58036 5. PACKAG ING. Unless otherwise pro

27、vided in the contract, the vehicle shall be packaged in accordance with the contractors commercial practice and packed to assure acceptance by common carrier and provide product protection against loss and damage while in transit. 6. NOTES. 6.1 Other Documents: a. Uniform Freight Classification Rule

28、s: Application for copies of the above publication should be addressed to the Consolidated Classification Committee, Tarif Publication Officer, Room 1106,222 South Riverside Plaza, Chicago, IL 60606. MILITARY INTERESTS: CUSTODIAN: AIR FORCE-99 AGENT AIR FORCE 99 PREPARING ACTIVITY: AIR FORCE-82 Project Number 1730F345 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-

展开阅读全文
相关资源
猜你喜欢
  • BS PD IEC TS 62763-2013_5284 Pilot function through a control pilot circuit using PWM (pulse width modulation) and a control pilot wire《通过控制导向线使用PWM (脉冲宽度调制) 的导向功能和控制导向线》.pdf BS PD IEC TS 62763-2013_5284 Pilot function through a control pilot circuit using PWM (pulse width modulation) and a control pilot wire《通过控制导向线使用PWM (脉冲宽度调制) 的导向功能和控制导向线》.pdf
  • BS ISO 8070-2007 Milk and milk products - Determination of calcium sodium potassium and magnesium contents - Atomic absorption spectrometric method《牛奶和奶制品 钙、钠、钾和镁含量的测定 原子吸.pdf BS ISO 8070-2007 Milk and milk products - Determination of calcium sodium potassium and magnesium contents - Atomic absorption spectrometric method《牛奶和奶制品 钙、钠、钾和镁含量的测定 原子吸.pdf
  • BS ISO 8082-1-2009 Self-propelled machinery for forestry - Laboratory tests and performance requirements for roll-over protective structures - General machines《林业用自推进机械 防倾.pdf BS ISO 8082-1-2009 Self-propelled machinery for forestry - Laboratory tests and performance requirements for roll-over protective structures - General machines《林业用自推进机械 防倾.pdf
  • BS ISO 8082-2-2011 Self-propelled machinery for forestry Laboratory tests and performance requirements for roll-over protective structures Machines having a rotating platf.pdf BS ISO 8082-2-2011 Self-propelled machinery for forestry Laboratory tests and performance requirements for roll-over protective structures Machines having a rotating platf.pdf
  • BS ISO 8083-2006 Machinery for forestry - Falling-object protective structures (FOPS) - Laboratory tests and performance requirements《林业机械 落体防护装置(FOPS) 实验室试验和性能要求》.pdf BS ISO 8083-2006 Machinery for forestry - Falling-object protective structures (FOPS) - Laboratory tests and performance requirements《林业机械 落体防护装置(FOPS) 实验室试验和性能要求》.pdf
  • BS ISO 8086-2004 Dairy plant - Hygiene conditions - General guidance on inspection and sampling procedures《乳品厂 卫生条件 检验和取样程序通用指南》.pdf BS ISO 8086-2004 Dairy plant - Hygiene conditions - General guidance on inspection and sampling procedures《乳品厂 卫生条件 检验和取样程序通用指南》.pdf
  • BS ISO 8096-2005 Rubber- or plastics-coated fabrics for water resistant clothing - Specification《雨衣用橡胶或塑料涂覆织物 规范》.pdf BS ISO 8096-2005 Rubber- or plastics-coated fabrics for water resistant clothing - Specification《雨衣用橡胶或塑料涂覆织物 规范》.pdf
  • BS ISO 8097-2001 Aircraft Minimum airworthiness requirements and test conditions for certified air cargo unit load devices《航空器 经认证的航空货运集装单元装置最低适航性要求和试验条件》.pdf BS ISO 8097-2001 Aircraft Minimum airworthiness requirements and test conditions for certified air cargo unit load devices《航空器 经认证的航空货运集装单元装置最低适航性要求和试验条件》.pdf
  • BS ISO 8114-1993 Textile machinery and accessories - Spindles for ring-spinning and doubling machines - List of equivalent terms《纺织机械和附件 环锭纺纱机和并线机用锭子 同义术语表》.pdf BS ISO 8114-1993 Textile machinery and accessories - Spindles for ring-spinning and doubling machines - List of equivalent terms《纺织机械和附件 环锭纺纱机和并线机用锭子 同义术语表》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1