1、 INCH-POUND A-A-5915307 Jan 2003 COMMERCIAL ITEM DESCRIPTION TRUCK, FIRE FIGHTING, (RESCUE) (LIGHT RESCUE TRUCK) The General Services Administration has authorized the use of this commercial item description for all federal agencies. 1. SCOPE. This commercial item description (CID) covers a commerci
2、al light rescue truck. It has a 4x4 chassis with a diesel engine and an automatic transmission; a cab for at least three persons with four doors; and a utility body. The light rescue truck is intended to stow and transport forcible entry equipment, rescue equipment, and personnel for hazardous mater
3、ials mitigation and containment and for structural, automotive, and aircraft occupant rescue, in both on- and off-road environments. 2. SALIENT CHARACTERISTICS. The light rescue truck shall be in accordance with the applicable requirements of the following chapters of National Fire Protection Associ
4、ation (NFPA) 1901, 1999 Edition, for Special Service Fire Apparatus: Beneficial comments, recommendations, additions, deletions, clarifications, etc. and any data that may improve this document should be sent to: WR-ALC/TILCC, 420 Second Street, Suite 100, Robins AFB, GA 31098-1640 AMSC N/A FSC 4210
5、 DISTRIBUTION STATEMENT A. Approved for public release: distribution is unlimited. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59153 Chapter Title 1 Administration 2 General Requirements 8 Special Service Fire Apparatus 10 Chassis and Vehicle
6、 Components 11 Low-Voltage Electrical Systems and Warning Devices 12 Driving and Crew Area 13 Body, Compartments, and Equipment Mounting 21 Line Voltage Electrical Systems 24 Winches 25 Referenced Publications 2.1 Administration. 2.1.1 Environmental conditions. 2.1.1.1 Altitude. Unless otherwise spe
7、cified (see 6.2), the vehicle shall be designed for operation at 2,000 feet above sea level. 2.1.1.2 Temperature range. The vehicle shall be capable of satisfactory storage and operation in temperatures ranging from 0 to 125 F. The vehicle shall be equipped with an engine coolant heater, which shall
8、 be powered through the electrical shoreline connection (see 2.6.2). 2.1.2 Foreign object damage. All loose metal parts, such as pins and valve caps, shall be securely attached to the vehicle with wire ropes or chains. “Dog tag“ style beaded chains shall not be provided. Removable panels, if provide
9、d, shall be attached with captive fasteners. 2.1.3 Roadability. 2.1.3.1 Operating terrain. The vehicle shall operate on paved and graded gravel roads and off-road (cross country) terrain. 2.1.3.2 Acceleration. The fully loaded vehicle shall accelerate from 0 to 50 miles per hour (mph) within 25 seco
10、nds on a level, paved road. 2.1.3.3 Maximum speed. The fully loaded vehicle shall attain a minimum top speed of 65 mph on a level, paved road. 2.1.3.4 Gradeability. The fully loaded vehicle shall be able to maintain a speed of at least 5.0 mph while ascending any paved slope up to and including 30 p
11、ercent. 2.1.4 Overall dimensions. Overall dimensions shall be the minimum consistent with the operational performance and the design constraints necessary to achieve the specified performance. Overall dimensions shall not exceed: 2 Provided by IHSNot for ResaleNo reproduction or networking permitted
12、 without license from IHS-,-,-A-A-59153 Length 320 inches Width 96 inches (excluding mirrors) Height 102 inches (without light mast) 116 inches (with light mast) 2.1.5 Turning diameter. The fully loaded vehicle shall have a wall to wall turning diameter of 80 feet maximum in both directions. 2.1.6 A
13、ngles of approach and departure. The fully loaded vehicle shall have angles of approach and departure of not less than 11. 2.1.7 Manuals and video tape. 2.1.7.1 Technical manuals. The overall format for the manuals may be military specification, commercial, or a combination of both. Each technical m
14、anual shall have a title page. Line art shall be used to the maximum extent possible for illustrations and parts lists. The contractor shall validate the technical manuals for accuracy prior to submission to the procuring activity for verification. The contractor shall submit one complete set to the
15、 procuring activity for verification at least 30 days prior to the first production test. Any changes or corrections noted by the procuring activity shall be corrected and updated pages or manuals shall be submitted to the procuring activity. Once approved by the procuring activity, the contractor s
16、hall pack two complete sets with each vehicle. An additional two complete sets shall be submitted to the procuring activity for stock. 2.1.7.1.1 Operators manual. The operators manual shall include all information required for the safe and efficient operation of the vehicle, including any special at
17、tachments or auxiliary equipment. The operators manual shall include at least the following: a. Location and function of all controls and instruments shall be illustrated and fully described. b. Safety information that is consistent with the safety standards established by the Occupational Safety an
18、d Health Administration (OSHA). c. Checks and adjustments in preparation for placing the vehicle for service upon receipt from the contractor. d. Preparation for shipment or storage. e. Warranty information and period of the warranty for the complete vehicle and for any component warranty that excee
19、ds the warranty of the complete vehicle. Addresses and telephone numbers shall be provided for all warranty providers. 3Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59153 f. General description of and step-by-step instructions for the operatio
20、n of the vehicle and its auxiliary equipment. g. Description of the post-operational procedures (draining, flushing, et cetera). h. Checklists for the daily maintenance inspection and mission readiness checks that the operator is expected to perform. i. Procedures for towing a disabled vehicle. j. S
21、chedules for required preventative maintenance and required periodic maintenance. 2.1.7.1.2 Service manual. The service manual shall identify any special tools and test equipment required and shall cover troubleshooting and maintenance as well as minor and major repair procedures. The text shall con
22、tain performance specifications, tolerances, and fluid capacities; current, voltage, and resistance data; test procedures; and such illustrations and exploded views as may be required to permit proper maintenance by qualified mechanics. The manual shall contain an alphabetical subject index as well
23、as a table of contents. The service manual shall contain at least the following, where applicable: a. Hydraulic schematic. b. Pneumatic schematic. c. Electrical schematic. d. Winterization schematic. e. Schedules for required preventative maintenance and required periodic maintenance. f. Location, p
24、rocedure, and interval for parts of the truck and equipment which require lubrication. 2.1.7.1.3 Parts manual. The parts manual shall include illustrations and exploded views, as needed, to properly identify all parts, assemblies, subassemblies, and special equipment. All components of assemblies sh
25、own in illustrations or exploded views shall be identified by reference numbers which correspond to the reference numbers in the parts lists. All purchased parts shall be cross-referenced with the original manufacturers name and part number. The parts identification manual shall provide the descript
26、ion, length, dimensions, and quantity of each item used per vehicle. The manual shall contain a numerical index. The parts manual shall contain a list of all of the component vendor names, addresses, and telephone numbers referenced in the parts list. 2.1.7.2 Video tape. A product familiarization vi
27、deo tape shall be provided with each truck. The tape shall verbally and visually provide all information required for operation and routine 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59153 inspection and maintenance of the vehicle and its
28、components, using the manuals as a baseline. An additional copy of the video tape shall be provided to the procuring activity. 2.1.8 Painting, plating, and corrosion control. 2.1.8.1 Dissimilar metals. Dissimilar metals, as defined in MIL-STD-889, shall not be used in intimate contact with each othe
29、r. 2.1.8.2 Finish. Exterior surfaces shall be prepared, primed, and painted with polyurethane paint in accordance with all of the paint manufacturers instructions and recommendations. Unless otherwise specified (see 6.2), the exterior finish color shall be Candy Apple Red, Sikkens Color Number FLNA3
30、021, DuPont Color Number 97902U or 4737U, PPG Color Number 71528 (the PPG name for this color is Cardinal Red), or equal. When specified, the exterior finish color shall be Forest Green, Color Number 24052 of FED-STD-595, or Desert Sand, Color Number 30313 of FED-STD-595. a. For vehicles painted Can
31、dy Apple Red, the cab upper body (from the bottom of the windshield) and roof shall be painted White, Color Number 17875 of FED-STD-595. Compartment interiors shall have a standard commercial finish. All bright metal and anodized parts, such as mirrors, horns, light bezels, and treadplate, shall not
32、 be painted. Roll-up compartment doors may be painted to match body color or left unpainted. b. For vehicles painted Forest Green or Desert Sand, all exterior surfaces, including all normally bright metal and anodized parts and any interior surfaces visible with any compartment door open (but not th
33、e interior of the cab), shall be painted body color. This includes compartment shelves and mounting hardware, but does not include items mounted in the compartments. Non-metallic materials may be black or gray. 2.1.8.3 Reflective stripes. Horizontal, reflective stripes in accordance with 13-9.2 of N
34、FPA 1901 shall be applied around the vehicle in an approximate plane with the headlights. Offsets in the reflective stripes shall be made to maximize the length of reflective surface. Bright metal trim or anodized parts may interrupt the reflective stripes. The pattern shall be seven inches wide wit
35、h three reflective stripes (one inch reflective, one inch body color, three inches reflective, one inch body color, and one inch reflective). The reflective stripes shall be white for vehicles painted Candy Apple Red and Desert Sand, and black for vehicles painted Forest Green. 2.1.9 Identification
36、plate. A permanently marked identification plate shall be securely mounted at the drivers compartment. The identification plate shall contain the following information: NOMENCLATURE MANUFACTURERS MAKE AND MODEL MANUFACTURERS SERIAL NUMBER REGISTRATION NUMBER NATIONAL STOCK NUMBER (NSN) VEHICLE CURB
37、WEIGHT: kg (pounds) 5Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59153 PAYLOAD, MAXIMUM: kg (pounds) GROSS VEHICLE WEIGHT (GVW): kg (pounds) DATE OF DELIVERY (month and year) WARRANTY (months and km (miles) CONTRACT NUMBER 2.2 Chassis and veh
38、icle components. 2.2.1 Capacity. The vehicle shall have a minimum Gross Vehicle Weight Rating (GVWR) of 17,500 pounds. 2.2.2 Engine. The vehicle shall have a diesel engine. 2.2.3 Exhaust system. The exhaust system outlet(s) shall be directed away from personnel accessing equipment compartments or th
39、e roof access ladder. 2.2.4 Brake system. The vehicle shall be equipped with hydraulic four-wheel disc brakes with an all-wheel antilock brake system. 2.2.5 Tires and wheels. The vehicle shall be equipped with single tires on the front axle and dual tires on the rear axle. The vehicle shall be equip
40、ped with tubeless steel belted radial tires with on/off-road type tread mounted on steel disc wheel assemblies. If all tire and wheel assemblies are identical, one spare tire and wheel assembly shall be provided. If two different tire and wheel assemblies are provided, two spare tire and wheel assem
41、blies shall be provided, one of each configuration. Spare tires and wheels are not required to be mounted on the vehicle. 2.2.6 Fenders. Rear fenders and fender liners having tire chain clearance shall be provided. 2.2.7 Steering. The vehicle shall be equipped with power steering. 2.2.8 Transmission
42、. A fully automatic transmission with a hydraulic torque converter and at least five forward speeds shall be provided. The normal driving range selector position shall provide at least four gear ratios without movement of the selector. The net torque capacity and the net power rating of the transmis
43、sion shall exceed the output ratings of the engine. 2.2.9 Traction control. The vehicle shall be equipped with limited slip, automatic locking, or driver controlled locking differentials in the rear axle and between the axles. 2.2.10 Fuel tank. Fuel tank(s) having a minimum usable capacity of 36 gal
44、lons shall be provided. The location of the fuel tank(s) shall protect it (them) from mechanical damage during normal use of the vehicle. 2.2.11 License plate bracket. A lighted license plate bracket shall be provided at the left rear of the vehicle. 6 Provided by IHSNot for ResaleNo reproduction or
45、 networking permitted without license from IHS-,-,-A-A-59153 2.3 Low-voltage electrical systems. The vehicle shall have a 12 volt electrical and starting system. 2.3.1 Alternator. Two 115 amp alternators shall be provided. The alternators shall be in accordance with 11-3 of NFPA 1901. The minimum co
46、ntinuous electrical load shall include operation of the air conditioning system. 2.3.2 Batteries. Dual batteries rated at 78 amp-hours and 750 cold cranking amps (cca) minimum each shall be provided. Batteries shall be of the maintenance-free type; addition of water shall not be required during norm
47、al service life. The battery cover and vent system shall be designed to prevent electrolyte loss during service and to keep the top of the battery free from electrolyte. 2.3.3 Battery charger or conditioner. The vehicle shall have a DC taper type battery charger or an automatic battery conditioner,
48、providing a minimum 15 amp output. The charger/conditioner shall be permanently mounted on the vehicle in a properly ventilated, accessible location. The charger/conditioner shall be powered from the electrical shoreline receptacle (see 2.6.2). A charging indicator shall be installed next to the rec
49、eptacle. When a battery conditioner is provided, it shall monitor the battery state of charge and, as necessary, automatically charge or maintain the batteries without gassing, depleting fluid level, overheating, or overcharging. 2.3.4 Warning lights. All warning lights shall use strobe type or light emitting diode (LED) elements. The warning light system, related components, and devices shall be in accordance with 11-8 of NFPA 1901. 2.3.4.1 Light bar.
