1、Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-O 1m NO. a. .4 5 6 7 8 9 - MIL1-25470(USA.E) QUANTITY DESCR ET ION Servo Amp 1 if ier Video Amplifier Sw
2、eep Amplifier Power Supply Bon$ Ring Assembly Cable Assembly, External SEE REQUIREMENT 3.8.4 3.8.5 3.8.6 3 -8.7 3.8.8 3.8.9 3. General ,secif ication.- The requirements o MIL-E-54 O apply as requirements of this specification with the exceptions and additions, identified by similarity f paragraph he
3、adings, called out herein. the two specifications conflict, this specification shall govern. Whe: 3.3.1 Approval of Nonstandard Parts and Materials.- A contract for electronic production equipment, which may reference this specification to establish requiremnts, shall be Category III as defined in M
4、IL-E-3400. 3.3.1.1 The approval of the equipment as specified in 3.2, or model as required in 4.5.1, shall be contingent upon authorization by the procuring activity for the use of all parts and materials. O - 3.3.2 Data -to be Submitted -with Nonstandard Part and Material 3.3.2.1 Item “S5“ of figur
5、e 1 (MILE-5400) shall include the following in the description of the part or material: . a. Electrical and mechanical ratings b. c . Special features of construction d. e. Type of insulation, dielectric, etc. f. g. Details of spring materials, contacts, etc. h. .Details of tropicalizing process Num
6、ber.of the standard specification (MIL, AN, RW, etc.) under which the part or material was manufactured Materials used (type, grade, etc.) Type of finish or covering 3.3.2.2 Test Data.- Item “12“ of figure 1 (MIL-E-5400) shall include the complete detail test procedure used. O -3 Provided by IHSNot
7、for ResaleNo reproduction or networking permitted without license from IHS-,-,-3.3.2.2.1 The contractor shall submit to the procuring activity test data on those nonstandard parts which constitute an engineering risk or procurement availability problem. 3.3.2.2.2 The tests conducted by the contracto
8、r on nonstandard parts and materials shall be all the appropriate tests of the specifications determined by ANA Bulletin 143 which are applicable to the particular item. The sample nonstandard parts on which the contractor conducted his tests shall be submitted to the procuring activity together wit
9、h nonstandard part data sheets. 3.3.3 Preliminary List of Electronic Parts.- In addition to the requirements of MIL-E-5400, the cqntractor shall submit to the procuring activity a list of all parts and materials affecting the electrical characteristics of the equipment. 3.3.4 Markinp: and Identifica
10、tion 3.3.4.1 external surf aces of the canponent providing this weight exceeds 50 pounds. 3.3.5 Meters (Electrical Indicating Instruments1,- Only rusedized . 3.3.6 Tools (Special).- Special tools, if required, shall be designad The weight of each major component shall be marked on three meters shall
11、 be acceptable. in accordance with Specification MU,-D-8512 and shall be furnished with the equipment. 303.7 Life 3.3.7.1 Service Life and Reliability.- The azimuth and range indicator shall have a mean-time-to-failure rate of at least 200 hours and a minimum service life of 2000 hours. Parts expect
12、ed to be serviced or replaced, due to the present state of the art in meeting the required service life, shall be designated. The expected life of these parts must meet the approval of the procuring activity. 3.3.8 Maintenance Provisions.- The equipment shall be so constructed that no damage to any
13、component or any undue distortion to any structural member shall be caused by placing any of the six sides of the equipment, except the front on a flaz surface, 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-1-25470 bb W 799770b 0133461 W 3.3.
14、8.1 Special Test Equiument.- Special or unique items of test equipment necessary for operational checkout of the IP-284A/Aps Indicator , and for tne proper demonstration, maintenance, and testing of the equipment shall be provided by the contractor. Special test equipment shall be developed in accor
15、dance with Specification MILT-945. 3.3.9 Orientation.- The azimuth an range indicator may be mounted in any position, if properly supporGd from the mounting pads . 3 4.10 Service Conditions (Electrical) 3.3.10.1 The equipment shall perfom as specified herein when operated with lo5 to 125 volts ac li
16、ne-to-neutral, 3-phase, 380 to 420 cps power in accordance with Specification MIL-E-7894. 3.3.10.2 Power Ratings.- The power required by the equipment shall not exceed the following: 4 amperes at il5 volts ac, 400 cps, single phase 15 milliamperes at minus 3OOV dc 3.3.11 Service Conditions (Environm
17、ental) .- The equipment specified herein is considered Class 1 as defined in MIL-E-3400 by the paragraph “Classification“ under “Scope. II 3.3.12 Service Conditions (Mechanical).- The equipment shall be capable of withstanding the vibration tests and shock tests as specified in Motorola Specificatio
18、n 3l2M42O without impairing the performance and without damage to the equipmnt. 3.3.13 Stability.- The equipment shall operate with specified performnce for at least 200 hours, continuously or intermittently, without adjustment of any controls which are not accessible during flight. During the first
19、 20 hours of the 200-hour period, no adjustment of any control shall be permitted. 3.4 Standard Sample,- A standard production sample of the liidicator, Azimuth and Range Up-284A/APS shall be used to demonstrate the ruinhum acceptable standard of materials, design, workmanship and performance not sp
20、ecified herein (see 6.2.2). with the required functional and dimensional interchangeability. If it conflicts with the specification, the specification shall govern. It shall also be used to detemine compliance 5 Provided by IHSNot for ResaleNo reproduction or networking permitted without license fro
21、m IHS-,-,-MU- 1-23470 ( USAI?) 3.5 Selection of Specification and Standards.- Specifications and standards for necessary connnodities and services not specified herein shall be sele.cted according to ANA Bulletin 143, except as provided in 3.5.1 and 3e.je2. 3.5.1 Ccsmercial Parts . - Comercial parts
22、 having sui table properties may be used where, on the date of invitation for bids, there are no suit- able standard parts. In any case, commercial utility parts, like screws, bolts, nuts and cotter pins, having suitable properties may be used provided 8 . a. They can be replaced by the standard par
23、ts (PIS or AN) without alteration. b. The corresponding standard part numbers are referenced in the parts list and, if practical, on the contractors drawings. 3.5.2 Standard Parts.- With the exception in 3.5.1, MS and AN standard parts shall be used where they suit the purpose, on the drawings by; t
24、heir part numbers. IP-284A/Aps Indicator shall conform to Drawing 372315050 and details thereof . They shall be identified 3.6 Desim and Cons%ruction.- The design and construction of the 3.6.1 Nongovernmental Drawiws .- This specification shall govern in any conflict with the nongovernmental drawing
25、a called out herein. 3.7 Performance.- The P-28$/Aps Indicator shall provide a PPI presentation of the output of the AN/APS-, or equivalent radar set, maified by inputs from an associated bombing-navigational computer to allow a visual representation of radar targets, terrain features and radar beac
26、ons. a 10-hch cathode ray tube, and shall be pressurized by means of the radar pressurization system to allow high altitude operation. Th,e unit shall have integral photographic capability, 3.8 Details of Cowonents 3.8.1 Periscope.- The cmra periscope shall be designed for use with a modified Type 0
27、-15 Camera and shall be of the smallest size consistent with proper performance. designed to require no changes in the camera itself other than a change of focus, as effected by a change in the lens shim or, preferably, by The camera attachment shall be Provided by IHSNot for ResaleNo reproduction o
28、r networking permitted without license from IHS-,-,-Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-1-25470 bb W 797970b 0133464 T W - MIL- I-29(70 ( USAI?) 3.8.2.5 Magazine Guide.- A magazine guide shall be provided on the indicator center secti
29、on to facilitate alignment of the magazine with the camera. 3.8.2.6 Carryiw Handles.- Carrying handles shall be provided, one on eaoh side of the indicator center section, to facilitate transporting and ins tallation. 3.8.3 1OUP4A, or equivalent, an shall have a minimum useful screen diemeter of 9 i
30、nches. Cathode Ray Tube.- The oathode ray tube shall be a Type . 3.8.4 Servo Amplifier.- A servo amplifier shall be contained within the indicator on a plug-in chassis and shall be easily removerble for servicing OF replaaement. The servo amplifier shall utilize the azimuth information from the rada
31、r antenna to drive the indicator sweep deflection coils in synchronism with the antenna. Provision shall be incorporated in the servo amplifier to introduce a roll correction voltage from an external source. a voltage from a motor tachometer into the servo amplifier to correct for servo backlash. Pr
32、ovision 8hall also be incorporated for introducing 3 . 8.5 Video Panplif ier. - A video amplifier shall be self - The inspection and testing of the Indicator, himuth and Range IP-28/AFS shall be classified as followst a. b. Acceptance tests - - - - - - - - - - Sea 4.2 Preproduction testing- - - - -
33、- - - See 4.3 r- 4.2 Acceptance Tests.- Acceptance tests shall consist of: a, Individual dxsts b. Sampling plan and tests E 10 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL- 1-25470 ( US) 4.2.1 Individual Tests.- Each IP-284A/Aps indicator shal
34、l be subjected to the following tests as described.under 4.4 of this specifi- cation : TEST APPLICABrn lARAGRAPH Sweep Amplifier Test 4.4.1 Video Amplifier Test 4.4.2 Servo Amplifier Test Power Supply Test Indicator, bimuth and Range IP-284A/AFS Reliability Test 4.2.2 Sampling Plan and Tests 4.e4.3
35、4.4.4 4.4.5 4.4.6 4.2.2.1 Sampling Plan,- One IP-284A/Aps indicator shall be selected at random from every 200, or fraction thereof, manufactured on each production run and subjected to the following tests as described under 4.4: TEST APPLICBBLE PARAGRAPH Indicator, Azimuth and bige P-A/APS 4.4.s Sa
36、mpling Tests 4.4.7 4.2.2.1.1 Rejection and Retest,- When one item selected from a production run fails to meet this specification, no items still on hand or later produced shall be accepted until the extent and cause of failure are determined. 4.2.2.1.2 Individual Tests May Continue.- For operationa
37、l reasons, individual tests may be continued pending the investigation of a sampling test failure. shall not be made until it is determined that items meet all the requirements of this specification. But final acceptance of items on hand or produced later 4.2.3 Defects in Items AJready Accepted.- Th
38、e investigation of a test failure could indicate that defects may exist in items already accepted. If so, the contractor shall fully advise the procuring activity of all defects likely to be founi3 and roethods of correcjiing them. - 11 - - I 1. . Provided by IHSNot for ResaleNo reproduction or netw
39、orking permitted without license from IHS-,-,-MG 1-25470 (USAF ) 4.3 Tes tinp Requirements 4.3.1 Test Conditions.- Unless otherwise specified, the equipmnt shall be subjected to the tests under the.test conditions specified in Specification MIL-E-5400, using applicable reference voltages RS specifie
40、d in Specification MILE-7894, 4.4 Test Methods 4.4.1 Sweep Amplifier Test.- accordance. with Specification 312M.570. accordance with Specification 312M.69 . The sweep amplifier shall be tested in 4.4.2 Video Amplifier Test.- Tb video anplifier shall be tested in 4.4.3 -Servo Amplifier Test.- The ser
41、vo amplifier shall be tested in accordance with Specification 312M571. 4.4.4 Power Supply Test.- 4.4,5 Indicator. -Azimuth and Range IJ?-284A/APS.- The Ih284A/AF3 4.4.6 Reliability Test.- Each Indieator; Azimuth and Range E-284a/S shall be subjected to a 5-hour reliability test and this test may run
42、 concurrently with one or more of the other tests being psdormed, 99 percent (see figure 1) of the equipments shall complete this test without failure to comply with the man-time-to-failure requiremnt of 3.3 .?.l. The contractor shall subanit reports at 3-1nonth intervals indicating the The power su
43、pply shall be tested in accordance with Specification 3im568, indicator shall be tested in accordance with Specification 312N : a. Number of equipments tested during the previous 9-month period Number of equipments which failed b, cN Time in each case until failure d. Description of each .failure 4.
44、4.7 Sampling Tests.- Sampling tests shall be performed in accoraanae with Specification 3lSE4420, except that the vibration test, shock test, life test and explosion-proof test shall be omitted. 12 UP0 822953-2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from
45、 IHS-,-,-MIL-1-25470 bb W 777770b OL334b7 7 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-4.5 Preproduction - Testing 4.5.1 Preproduction Test Sample.- The contractor shall conduct tests on one preproduction sample equipment to determine that the d
46、esign of the equipment meets the requirements specified herein. 4.5.2 Preproduction Tes.ts.- Preproduction tests shall consist of all tests required in accordance with Specif icatipn 312MipO. 5. PREPARATION FOR DELIVERY 5.1 General.- All preservation, packaging, packing, marking and testing shall co
47、nform to the requirements of Specification ME-E-17555 except that all applicable tests shall.be conducted by the contractor in the presence of a Government representative. In conducting rough handling teqts any unit package of fragile items, dummy loaded and weigh- ing over five pounds, shall be int
48、ernally instrumented for recording the Hg8 shock loading simultaneously along each of three mutually perpendicular axes of the tes specimen. The shock loading data shall be reported to the procuring activity along with the maximum “gn shock loading that the actual i tem will withstand vi thout damag
49、e . After successful completion of the above test the test shall be repeated using the actual item without instrumentation. Acceptance of the package design and preparation for delivery will be contingent .upon successful passage of the latter test. Any unpackaged item shall be considered fragile if it would be damaged mechanicall
