1、1 Revision and Errata List AISC Steel Construction Manual, 14thEdition, Third Printing (July 15, 2015) The following list represents corrections that have been made in the Fourth Printing of the Steel Construction Manual. Page(s) Item 14-9 Under the heading “ANCHOR RODS” revise the 5thline to “ see
2、also ACI 349 Appendix D (ACI, 2006).” 14-22 Revise the listing under “Gage” in the table for “W8x24 & 28” to 4 in. 14-38 Revise figure for Case VIIID so the flange weld symbol has “PJP” in the tail. 14-39 Revise figure for Case VIIIE so both the flange and web weld symbols have “CJP” in the tail. 16
3、.1-126 Insert “” into Equation J3-4. (Note: This error only occurs in the 3rdprinting of the Manual.) 16.1-126 Insert “” as follows: where = mean slip coefficient. (Note: This error only occurs in the 3rdprinting of the Manual.) 16.1-149 In Table K2.1A, revise the 5thline to read (replace “compression branch” with “tension branch”): Branch wall slenderness: Db/tb 50 for tension branch 16.1-276 In 2ndto last line, insert “” in “P-.” (Note: This error only occurs in the 3rdprinting of the Manual.) 17-34 Revise equations for the ellipse as follows: 2222 22221, ,xy H Bx By y HxBHH B
